Order Amending the China Surtax Remission Order (2024) and the United States Surtax Remission Order (2025) (2025-1): SOR/2025-210

Canada Gazette, Part II, Volume 159, Number 23

Registration
SOR/2025-210 October 15, 2025

CUSTOMS TARIFF

P.C. 2025-731 October 15, 2025

Her Excellency the Governor General in Council, on the recommendation of the Minister of Finance, makes the annexed Order Amending the China Surtax Remission Order (2024) and the United States Surtax Remission Order (2025) (2025-1) under section 115footnote a of the Customs Tariff footnote b.

Order Amending the China Surtax Remission Order (2024) and the United States Surtax Remission Order (2025) (2025-1)

China Surtax Remission Order (2024)

1 Item 1 of Schedule 1 to the China Surtax Remission Order (2024) footnote 1 is replaced by the following:
Item

Column 1

Tariff Item

Column 2

Description of Goods
1 7210.12.00 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated, or coated with tin, of a thickness of less than 0.5 mm
2 7210.70.00 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, painted, varnished, or coated with plastics
3 7212.10.00 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, plated, or coated with tin
4 7219.22.00.10 Stainless steel plates, hot-rolled, not in coils, of a thickness of at least 4.75 mm but not exceeding 10 mm, of a width of 600 mm or more but not exceeding 1,830 mm
2 Schedule 1 to the Order is amended by adding the following after item 7:
Item

Column 1

Tariff Item

Column 2

Description of Goods
7.1 7219.33.00.10 Polished stainless steel coils and sheets of the following grades and finishes:
  • – grade 304, finish No. 4
  • – grade 316, finish No. 2B
  • – grade 316, finish No. 4
  • – grade 304, finish BA1
7.2 7219.33.00.90 Polished stainless steel coils and sheets of grades 304 or 430 and finish No. 4
7.3 7219.34.00.10 Polished stainless steel coils and sheets of grade 304 and finish No. 4
7.4 7219.34.00.90 Polished stainless steel coils and sheets of grade 430 and finish No. 4
3 Schedule 1 to the Order is amended by adding the following after item 8:
Item

Column 1

Tariff Item

Column 2

Description of Goods
9 7222.19.00.21 Stainless steel flat bars, not further worked than hot-rolled, hot-drawn, or extruded
4 Schedule 1 to the Order is amended by adding the following after item 10:
Item

Column 1

Tariff Item

Column 2

Description of Goods
10.1 7222.20.00.91 Stainless steel bars and rods, not further worked than cold-formed or cold-finished, of grade 304 or 304L
5 Schedule 1 to the Order is amended by adding the following after item 21:
Item

Column 1

Tariff Item

Column 2

Description of Goods
21.1 7228.60.00 Bars, of alloy or non-alloy steel, with an outside diameter of at least 25 mm but not exceeding 203 mm, with a wall thickness of at least 5 mm but not exceeding 38 mm and a length not exceeding 12 m, with forged or machined ends
21.2 7304.11.00 Seamless stainless steel tubes, of circular cross-section, with an external diameter not exceeding 114.3 mm
6 Schedule 1 to the Order is amended by adding the following after item 24:
Item

Column 1

Tariff Item

Column 2

Description of Goods
24.1 7304.31.00 Cold-drawn seamless mechanical tube of grade C1026, with an outside diameter of at least 2.625 inches but not exceeding 4.25 inches, with an inside diameter of at least 1.75 inches but not exceeding 4 inches, and a wall thickness of at least 0.313 inch but not exceeding 1 inch
24.2 7304.39.00 Steel coupling stock, of specification API 5CT L80, no coating
24.3 7304.39.00.70 Seamless tubes and pipes, of iron or non-alloy steel, for use in oil and gas applications, with an outside diameter of at least 25 mm but not exceeding 406 mm, with a wall thickness of at least 3 mm but not exceeding 50 mm, with lengths not exceeding 12 m
24.4 7304.49.00.90 Seamless tubes and pipes, of stainless steel, annealed and pickled or bright finish, for oil and gas service, with an outside diameter of at least 25 mm but not exceeding 273 mm, with a wall thickness of at least 2 mm but not exceeding 30 mm, with lengths not exceeding 12 m
24.5 7304.51.00
  • (a) Seamless tubes and pipes, of alloy steel, cold-drawn or cold-rolled, for use in drill pipe and completions equipment, with lengths up to 12 m, with an outside diameter of at least 25 mm but not exceeding 355 mm, with a wall thickness of at least 3 mm but not exceeding 40 mm;
  • (b) Seamless or ERW carbon steel tubes, of grade 1010 or 1020, with an outside diameter of at least 4.95 inches but not exceeding 14.00 inches
24.6 7304.59.00 Seamless tubing of alloy-steel, hot-finished, of an outside diameter of 5.50 inches and an inside diameter of 3.865 inches
7 The portion of item 25 of Schedule 1 to the Order in column 2 is replaced by the following:
Item

Column 2

Description of Goods
25
  • (a) Alloy mechanical tubes of grade 4140 or 4130 Mod, of specification ASTM A519, with an external diameter of at least 3.5 inches but not exceeding 10 inches, of a wall thickness of at least 0.3 inch but not exceeding 1.5 inches, and black lacquer protective coating;
  • (b) Seamless tubes, of alloy steel, with lengths not exceeding 12 m, of a kind used for oil or gas pipelines with an outside diameter of at least 25 mm but not exceeding 355 mm
8 Schedule 1 to the Order is amended by adding the following after item 25:
Item

Column 1

Tariff Item

Column 2

Description of Goods
25.1 7305.31.00.19 Longitudinally welded pipes of grade 3 ASTM A252
25.2 7305.39.00.20 Spiral welded steel pipes, of circular cross-sections
25.3 7306.29.00 Welded tubes of iron or non-alloy steel, with an outside diameter of at least 19.1 mm but not exceeding 88.9 mm, and a wall thickness of at least 2.0 mm but not exceeding 7.6 mm
25.4 7306.30.00.51 Carbon steel DOM (drawn over mandrel) structural tubing, grade 1026, with an outside diameter exceeding 60.325 mm but not exceeding 168.28 mm, of specification ASTM A513, A106 or A519
25.5 7306.30.00.59 Carbon steel DOM (drawn over mandrel) tubing, other than structural, grade 1026, with an outside diameter exceeding 60.325 mm but not exceeding 168.28 mm, of specification ASTM A513, A106 or A519
25.6 7306.30.00.61 Carbon steel DOM (drawn over mandrel) structural tubing, grade 1026, with an outside diameter exceeding 168.28 mm but not exceeding 273.05 mm, of specification ASTM A513, A106 or A519
25.7 7306.40.00.00 Stainless steel of grade 304L flared tubes
9 Schedule 1 to the Order is amended by adding the following after item 27:
Item

Column 1

Tariff Item

Column 2

Description of Goods
27.1 7306.50.00 Welded tubes of circular cross-section, of alloy steel other than stainless steel, with an outside diameter of at least 19.1 mm but not exceeding 88.9 mm, with a wall thickness of at least 2.0 mm but not exceeding 7.6 mm
10 Schedule 1 to the Order is amended by adding the following after item 30:
Item

Column 1

Tariff Item

Column 2

Description of Goods
30.1 7604.29.00.11 Bars of aluminum alloys, of round cross-section, with a cross-sectional dimension exceeding 12.7 mm
11 The portion of item 36 of Schedule 1 to the Order in column 2 is replaced by the following:
Item

Column 2

Description of Goods
36
  • (a) Aluminum checker plate sheets of alloy 3003, with a base thickness of 4 mm, width of 4 feet and length of 10 feet;
  • (b) Pre-painted aluminum coils, 3003-H24 with 8 or 12 Âµm polyester coating in black, brown or white, with a thickness of 0.5 mm and width of 610 mm;
  • (c) Aluminum coils of alloy 5005, H14 or H34, anodized quality, not clad, with a thickness exceeding 0.2 mm but less than 7 mm;
  • (d) Pre-painted aluminum coils, 3105-H26, with a thickness of at least 0.7 mm but not exceeding 0.8 mm, and a width of at least 1,240 mm but not exceeding 1,250 mm

12 Items 37 and 37.1 of Schedule 1 to the Order are repealed.

13 Schedule 1 to the Order is amended by adding the following after item 38.1:
Item

Column 1

Tariff Item

Column 2

Description of Goods
38.2 7606.91.00.90 Aluminum plates, sheets and strip, of non-alloyed aluminum, with a thickness of at least 3.5 mm but not exceeding 5.5 mm, circular, with a diameter of at least 100 mm but not exceeding 245 mm
38.3 7607.11.00 Aluminum foil, rolled but not further worked, not backed, in coils or reels, with a thickness of at least 0.004 inch but not exceeding 0.010 inch, and a width of at least 0.98 mm but not exceeding 22 inches, whether or not surface-treated
38.4 7607.11.00.20 Aluminum foil, in precut sheets or rolls, alloy 1145, soft temper (O), with a thickness of at least 0.013 mm but not exceeding 0.017 mm, of a width of at least 5 inches and of a length of at least 7 inches but not exceeding 14 inches for sheets, or in rolls of at least 320 feet but not exceeding 1700 feet
14 The portion of item 39 of Schedule 1 to the Order in column 2 is replaced by the following:
Item

Column 2

Description of Goods
39
  • (a) Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, other than rolled but not further worked, of alloys 3003, 3004, 3104, 8011 or 8111;
  • (b) Aluminum foil rolls, alloy 1145, soft temper (O), with a thickness of at least 0.013 mm but not exceeding 0.017 mm, 5 inches wide, in rolls of at least 320 feet but not exceeding 1700 feet
15 Schedule 1 to the Order is amended by adding the following after item 39:
Item

Column 1

Tariff Item

Column 2

Description of Goods
39.1 7608.20.00 Rigid aluminum conduit, threaded, in 10-foot lengths, in trade sizes of at least 0.5 inch but not exceeding 6 inches, with coupling on one end
16 The portion of item 1.1 of Schedule 2 to the Order in column 3 is replaced by the following:
Item

Column 3

Description of Goods
1.1 Chrome silicon wire, round, with a diameter of at least 1.5 mm but not exceeding 8.51 mm
17 The portion of item 4 of Schedule 2 to the Order in column 3 opposite the tariff item “7305.39.00” is replaced by the following:
Item

Column 3

Description of Goods
4 Temporary steel piles, spiral welded, with a pipe outer diameter of 0.914 m, and a length of at least 59 m but not exceeding 75 m
18 The portion of item 5 of Schedule 2 to the Order in column 3 is replaced by the following:
Item

Column 3

Description of Goods
5 Steel coupling stock or mechanical tubes, no coating, with diameter of at least 4 inches but not exceeding 20 inches, with a wall thickness of at least 0.5 inch but not exceeding 2 inches, imported in lots of random length tubes not exceeding 30 feet, and that are:
  • (a) of specification ASTM A519/A513, of grade 1026, 4140, or 4130;
  • (b) of specification API 5CT, of grade K55, L80, P110, C110, or Q125
19 Schedule 2 to the Order is amended by adding the following after item 5:
Item

Column 1

Business Number

Column 2

Tariff Item

Column 3

Description of Goods

Column 4

Period

Column 5

Conditions
5.1 723429320 7305.39.00.30 Spiral-welded tubes of stainless steel, with an outside diameter of at least 1 m but not exceeding 3 m, a wall thickness of at least 20 mm but not exceeding 30 mm, and a length not exceeding 50 m From October 22, 2024 to December 31, 2025  
7306.40.00.30 Longitudinally welded tubes of non-alloy steel, with an outside diameter of at least 1 m but not exceeding 3 m, a wall thickness of at least 20 mm but not exceeding 30 mm, and a length not exceeding 50 m From October 22, 2024 to December 31, 2025  
20 Schedule 2 to the Order is amended by adding the following after item 9.1:
Item

Column 1

Business Number

Column 2

Tariff Item

Column 3

Description of Goods

Column 4

Period

Column 5

Conditions
9.2 756550901 7604.29.00.30 Aluminum profiles, extruded, with a cross-sectional dimension exceeding 254 mm, supplied in straight lengths From October 22, 2024 to December 31, 2025  
21 Schedule 2 to the Order is amended by adding the following after item 14:
Item

Column 1

Business Number

Column 2

Tariff Item

Column 3

Description of Goods

Column 4

Period

Column 5

Conditions
14.01 795006428 7304.39.00.90 Seamless steel tubes of non-alloy steel, of a circular cross-section, with an outside diameter of at least 1 m but not exceeding 3 m, a wall thickness of at least 25 mm but not exceeding 30 mm, meeting specifications equivalent to CSA G40.20-13/G40.21-13 or ASTM A572 From October 22, 2024 to December 31, 2025  
14.02 797799673 7306.30.00 Steel electrical metallic tubing (EMT), galvanized, non-threaded, in 10-foot lengths, trade size of at least 1.5 inches but not exceeding 4 inches From October 22, 2024 to December 31, 2025  
22 Schedule 2 to the Order is amended by adding the following after item 24:
Item

Column 1

Business Number

Column 2

Tariff Item

Column 3

Description of Goods

Column 4

Period

Column 5

Conditions
24.01 891389389 7225.40.00 Flat-rolled products of other alloy steel, hot-rolled, of a width of at least 600 mm, including plates and other flat-rolled forms From October 22, 2024 to December 31, 2025  

United States Surtax Remission Order (2025)

23 The portion of section 1 of the United States Surtax Remission Order (2025) footnote 2 before paragraph (a) is replaced by the following:

Remission — public health, public safety and national security

1 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1), the United States Surtax Order (Steel and Aluminum 2025) or the United States Surtax Order (Motor Vehicles 2025) in respect of goods imported for use by any of the following entities for the purpose of health care, public health, public safety, national defence or national security:

24 The portion of paragraph 2(b) of the Order before subparagraph (i) is replaced by the following:

25 Section 3 of the Order is replaced by the following:

Remission — manufacture, processing, production or packaging

3 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1) or the United States Surtax Order (Steel and Aluminum 2025) in respect of goods imported for use, in Canada, in the manufacture or processing of any good, in the production of any agricultural product or in the packaging of a food product or beverage.

26 Section 4.2 of the Order is replaced by the following:

Remission — goods referred to in Schedule 4

4.2 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1) or the United States Surtax Order (Steel and Aluminum 2025) in respect of the goods that are classified under a tariff classification number set out in column 2 of Schedule 4.

Remission — goods referred to in Schedule 4.1

4.21 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1) or the United States Surtax Order (Steel and Aluminum 2025) in respect of the goods that are classified under a tariff classification number set out in column 2 of Schedule 4.1.

27 Section 4.3 of the Order is amended by striking out “and” at the end of paragraph (a), by adding “and” at the end of paragraph (b) and by adding the following after paragraph (b):

28 (1) Subparagraphs 5(a)(i) and (ii) of the Order are replaced by the following:

(2) Paragraph 5(a.1) of the Order is replaced by the following:

29 Schedule 1 to the Order is amended by adding the following after item 4:
Item

Column 1

Goods

Column 2

Tariff Classification Number
5 The following freezers and refrigerators:
  • (a) blood bank or plasma freezers;
  • (b) laboratory freezers;
  • (c) blood bank refrigerators;
  • (d) blood bank pass-thru refrigerators;
  • (e) laboratory refrigerators;
  • (f) pharmaceutical refrigerators;
  • (g) pharmaceutical or laboratory pass-thru refrigerators
 8418.69.90
30 Schedule 2 to the Order is amended by adding the following after item 3:
Item

Column 1

Tariff Classification Number

Column 2

Goods
3.1 1205.10.00.10 Low erucic acid rape or colza seeds, for sowing
3.2 2204.29 Wine of fresh grapes, other than sparkling wine, including fortified wines, in containers holding more than 10 litres, for further processing in Canada
31 Schedule 2 to the Order is amended by adding the following after item 5:
Item

Column 1

Tariff Classification Number

Column 2

Goods
5.1 3918.90.90.90 Linear low density polyethylene (LLDPE) grass in 200 foot long rolls, with a width of 26.75 inches
5.2 3923.21.90 Three-ply form-fit packaging, constructed entirely of linear low-density polyethylene, each ply with a thickness of 3.2 thousands of an inch, with a 2-inch fill port with membrane and cutter, and a 2-inch dispense port, with internal seal dimensions of a length of 45 inches, of a width of 45 inches, of a height of 47 inches
32 Schedule 2 to the Order is amended by adding the following after item 7:
Item

Column 1

Tariff Classification Number

Column 2

Goods
7.1 4011.70 New pneumatic tires, of rubber, of a kind used on agricultural or forestry vehicles and machines
33 Schedule 2 to the Order is amended by adding the following after item 9:
Item

Column 1

Tariff Classification Number

Column 2

Goods
9.1 4011.90.10 New pneumatic tires, of rubber, for use with appliances of subheading 8424.82, combination excavating and transporting scrapers of subheading 8429.30 or 8430.69, horticultural machinery for soil preparation and lawn or sports-ground rollers of heading 84.32, horticultural mowers (other than mowers for lawns, parks or sports-grounds) of heading 84.33 and of a size of 36.00 × 51 or 40.00 × 57
34 Schedule 2 to the Order is amended by adding the following after item 22:
Item

Column 1

Tariff Classification Number

Column 2

Goods
22.1 4819.10.00 Cardboard containers, 8-ply, of interior dimensions of 42.5 inches length by 34.5 inches width, exterior dimensions of 46.5 inches length by 38.5 inches width by 42 inches height
35 Schedule 2 to the Order is amended by adding the following after item 26:
Item

Column 1

Tariff Classification Number

Column 2

Goods
26.1 7106.92.00.90 Composite strip made of beryllium copper (C17200) with silver overlay
36 Schedule 2 to the Order is amended by adding the following after item 28:
Item

Column 1

Tariff Classification Number

Column 2

Goods
28.1 7116.20.90 Polycrystalline diamond compact (PDC) cutters and blanks
28.2 7207.20.00.30 Ductile iron bars, of cast iron, hot-rolled or rough turned, of grade 65-45-12 or 80-55-06, of specification ASTM A536
28.3 7208.38.00.50 Flat-rolled steel sheets, hot-rolled, of a length of 240 inches, of a width of 84 inches, with a thickness of 11GA, and grade of SAE J403GR1010
28.4 7209.16.00.90 Flat-rolled products of iron or non-alloy steel, of a width of at least 600 mm, cold-rolled not clad, plated or coated, in coils, not further worked than cold-rolled, with a thickness of at least 1 mm but not exceeding 3 mm, with zinc aluminum magnesium coating
37 Schedule 2 to the Order is amended by adding the following after item 30:
Item

Column 1

Tariff Classification Number

Column 2

Goods
30.1 7210.61.00 Flat-rolled steel, in coils, of specification CSA G401-24, of a thickness of 1.6, 2.0 or 2.8 mm, of a width of 690 mm, 692 mm or 863 mm, with an aluminium and zinc coating of 1.0 ounce per square feet
38 The portion of item 32 of Schedule 2 to the Order in column 2 is replaced by the following:
Item

Column 2

Goods
32 Flat-rolled products of iron or non-alloy steel, with a width of 600 mm or more, painted, varnished or coated with plastic
39 Schedule 2 to the Order is replaced by adding the following after item 33:
Item

Column 1

Tariff Classification Number

Column 2

Goods
33.1 7211.29.00
  • (a) Flat-rolled products of iron or non-alloy steel, cold-rolled, not clad, plated or coated, of a thickness not exceeding 0.0098 inch, of a width not exceeding 23.625 inches, of grade AISI 1045, 1050, 1055, 1067 to 1070, or 1075, of specification ASTM A682 or ASTM A684;
  • (b) Flat-rolled steel strips, cold-rolled and annealed, of high-carbon SAE 1095 spring steel, of a thickness of 0.9 mm, of a width of 500 mm
40 Schedule 2 to the Order is amended by adding the following after item 34:
Item

Column 1

Tariff Classification Number

Column 2

Goods
34.01 7214.91.00 Continuous cast iron bars, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling, of grade 65-45-12, 65-40-18, or 60-55-06, with rectangular cross-section of a width of at least 1 inch but not exceeding 20 inches and a length of at least 2 inches but not exceeding to 40 inches
34.02 7214.99.00
  • (a) Continuous cast iron bars of grade 65-45-12, 65-40-18, 60-55-06, with a circular cross-sectional diameter of at least 0.5 inch up but not exceeding 20 inches, with a rectangular cross-section of a width of at least 1 inch but not exceeding 20 inches, a length of at least 2 inches but not exceeding to 40 inches;
  • (b) Special quality bars and rods of non-alloy steel, not further worked than forge, hot-rolled, of a diameter of at least 1 inch but not exceeding 10 inches, of grade 1018, 1020, 1022, 1040, 1045, 1055, ASTM105, ASTM108, ASTM350, ASTM36, or SA105 (VAR- vacuum degassed)
34.03 7215.10.00.90
  • (a) Bars and rods of free cutting steel, cold formed, of a diameter of 1.46 inches, of grade B 1018;
  • (b) Bars and rods of free cutting steel, cold formed, of a diameter of 1.312 inches, of grade 10B21;
  • (c) Bars and rods of free cutting steel, cold formed, of a diameter of 1 inch, of grade SAPH P and 1022;
  • (d) Bars and rods of free cutting steel, cold formed, of a diameter of 1.078 inches, of grade 1022
34.04 7215.50.00
  • (a) Bars and rods of cast iron, continuous, not further worked than cold-formed or cold-finished, of grade 65-45-12, 65-40-18 or 60-55-06, with a circular cross-sectional diameter of at least 0.5 inch but not exceeding 20 inches, or with a rectangular cross-section of a width of at least 1 inch but not exceeding 20 inches and a length of at least 2 inches but not exceeding to 40 inches;
  • (b) Bars, cold-rolled, of grade C1018 or C1045, of a thickness of at least but not exceeding 4 inches, of a length of 20 feet;
  • (c) Bars, cold-rolled of grade C1045, of yield of 90 ksi, of a thickness of 2-1/8 inches, of a length of 20 feet
34.05 7215.90.00 Other bars and rods of iron or non-alloy steel
34.06 7216.32.00 I sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
34.07 7216.33.00 H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
34.08 7219.11.00 Flat-rolled products of stainless steel, not further worked than hot-rolled, in coils, of specifications ASTM, ASME, or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness exceeding 10 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches
34.09 7219.12.00 Flat-rolled products of stainless steel, not further worked than hot-rolled, in coils, of specifications ASTM, ASME, or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of at least 4.75 mm but not exceeding 10 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches
34.1 7219.13.00 Flat-rolled products of stainless steel, not further worked than hot-rolled, in coils, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of at least 3 mm but not exceeding 4.75 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches
34.11 7219.14.00 Flat-rolled products of stainless steel, or more, not further worked than hot-rolled, in coils, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of less than 3 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches
34.12 7219.21.00 Flat-rolled products of stainless steel, not further worked than hot-rolled, not in coils, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of at least 10 mm, of a width of 36 inches, 48 inches, 60 inches, or 72 inches, of a length of at least 60 inches but not exceeding 400 inches
34.13 7219.22.00 Flat-rolled products of stainless steel, not further worked than hot-rolled, not in coils, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of at least 4.75 mm but not exceeding 10 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches, of a length of at least 60 inches but not exceeding 400 inches
34.14 7219.23.00 Flat-rolled products of stainless steel, not further worked than hot-rolled, not in coils, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of at least 3 mm but not exceeding 4.75 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches, of a length of at least 60 inches but not exceeding 400 inches
34.15 7219.24.00 Flat-rolled products of stainless steel, not further worked than hot-rolled, not in coils, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of less than 3 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches, of a length of at least 60 inches but not exceeding 400 inches
34.16 7219.31.00 Flat-rolled products of stainless steel, not further worked than cold-rolled (cold-reduced), of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of at least 4.75 mm, of a width of 36 inches, 48 inches, 60 inches, or 72 inches, of a length of at least 60 inches but not exceeding 400 inches
34.17 7219.32.00 Flat-rolled products of stainless steel, not further worked than cold-rolled (cold-reduced), of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PHor 310/310S, of a thickness of at least 3 mm but not exceeding 4.75 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches, of a length of at least 60 inches but not exceeding 400 inches
34.18 7219.33.00 Flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than cold-rolled (cold-reduced), of a thickness exceeding 1 mm but less than 3 mm
34.19 7219.34.00 Flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than cold-rolled (cold-reduced), of a thickness of 0.5 mm or more but not exceeding 1 mm
34.2 7219.35.00 Flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than cold-rolled (cold-reduced), of a thickness of less than 0.5 mm
34.21 7220.11.00 Flat-rolled products of stainless steel, of a width of less than 600 mm, not further worked than hot-rolled, of a thickness of 4.75 mm or more
34.22 7220.20.00.90 Type 436 Flat-Rolled, Stainless Steel Coil, with a thickness of 0.5 mm, of a width of 324.0 mm, with black flouropolymer laminate coating
34.23 7220.90.00 Flat-rolled products of stainless steel, of a width of less than 600 mm, other
34.24 7221.00.00 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a width of at least 0.125 inch but not exceeding 12 inches, of a length of at least 96 inches but not exceeding 400 inches
34.25 7222.11.00 Bars and rods of stainless steel,of grade SCF-19, P550, P690, P580, 1515- HS, NMW 140 or 17-4, of a thickness of at least 3 inches but not exceeding 20 inches, of a length of 30 feet
34.26 7222.20.00 Bars and rods, not further worked than cold-formed or cold-finished
34.27 7222.30.00 Bars and rods of stainless steel, other
34.28 7222.40.00 Angles, shapes and sections of stainless steel, angles, shapes and sections, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PHor 310/310S, of a width of at least 0.125 inches but not exceeding 12 inches, of a length of at least 96 inches but not exceeding 400 inches
41 The portion of item 36 of Schedule 2 to the Order in column 2 is replaced by the following:
Item

Column 2

Goods
36 Flat-rolled products of silicon-electrical steel, of a width of 600 mm or more, other than grain-oriented
42 Schedule 2 to the Order is amended by adding the following after item 38:
Item

Column 1

Tariff Classification Number

Column 2

Goods
38.01 7227.10.00 Bars and rods, of special bar quality, of other alloy steel (other than stainless steel), hot-rolled, in irregularly wound coils, with a diameter of at least 1 inch but not exceeding 10 inches, drawn or extruded of grades ASTM588, ASTM350 or SA350 (VAR- vaccum degassed)
38.02 7228.30.00 Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
38.03 7228.40.00.90 Alloy steel forged bars and rods, vacuum degassed, annealed or quenched and tempered, or normalized and tempered, of grade AISI4130, 4140,4340, or 8620, of specifications ASTM A29, ASTM A322, ASTM A304 or ASTM A108, with a circular cross-sectional diameter of less than 8 inches or a rectangular cross-sectional thickness of less than 4 inches
38.04 7228.50.00
  • (a) Steel bar, of grade Aerospace M50 NIL VIM/VAR, Aerospace 52100 VIM/VAR, Aerospace 440C VAR or Aerospace 4340 VAR, of technical specifications AMS 6278, AMS 6491, AMS 6490, AMS 5618, AMS 6440, AMS 6444, AMS 6414 or AMS 6415, of specifications GE -B50TF347, PWA36140, EMS52526, B50TF346, P29TF48, CPW54, CPW378, MSRR6083, EMS83060, EMS52491, CAFM/L-01-119, DMD0119.20, EMS52494 ,PWA723, CPW52, EMS52493, EMS56627 or EMS83060, of a thickness of at least 0.5 inch but not exceeding 12 inches, with a length of 14 feet;
  • (b) Bars and rods, of alloy steel other than stainless steel, maraging steel 250M & 300M, not further worked than cold-formed or cold-finished, of grade H13, modified 4340, or 4330, with a circular cross-sectional diameter of at least 1 inch but not exceeding 10 inches or with minimum dimensions of 10 inches height, 20 inches width and 16 inches length and maximum dimensions of 14 inches height, 28 inches width and 40 inches length for rectangular bars
38.05 7228.50.00.90
  • (a) Alloy steel bars and rods, cold formed or cold finish, of grade 4130, 4140, 4150, 4320, 4330, 4340, 52100, 8620, or 9310; vacuum degassed, annealed or quenched and tempered, or normalized and tempered, of specifications ASTM A29, ASTM A322, ASTM A304, ASTM  108, with a circular cross-sectional diameter not exceeding 8 inches or a rectangular cross-sectional thickness not exceeding 4 inches;
  • (b) Round bars of uncoated alloy steel, of grade 4140, with an annealed cold finish, with a diameter of 1 inch, with a length of 144 inches
38.06 7228.60.00
  • Bars or rods, of alloy steel, hot rolled or rough turned, vacuum degassed, annealed or quenches and tempered, or normalized and tempered(a) of grade 4130, other specification ASTM A20, with a circular cross-sectional diameter of less than 8 inches or a rectangular cross-sectional thickness of less than 4 inches;
  • (b) of grade AISI 4130, 4140, or 4150, of specifications ASTM A29, ASTM 322, ASTM A304, or ASTM A108
38.07 7304.19.00 Hydraulic line tube, of carbon steel, grade C1026, pressure rated at 3000 PSI, with 1.25 inch outer diameter by 0.120 inch wall thickness, of a length of 72 inches, zinc-plated
38.08 7304.90.00 Hydraulic line tube, carbon steel grade C1026, pressure rated at 3000 PSI, with outer diameter 1-1/4 inches and wall thickness 0.120 inch, available in lengths of 24 inches, 30 inches ,60 inches, 90 inches, and 120 inches, ends fitted with male-male JIC connections, size 1-5/16 inch (thread outside diameter), zinc plated
38.09 7306.29.00.49 Tubing of iron or steel, of a kind used in drilling for oil or gas, of an external diameter not exceeding 60.2 mm
38.1 7306.29.00.59 Tubing of iron or steel, of a kind used in drilling for oil or gas, of an external diameter of 60.3 mm
38.11 7306.29.00.69 Tubing of iron or steel, of a kind used in drilling for oil or gas, of an external diameter exceeding 60.3 mm but not exceeding 73 mm
38.12 7306.29.00.79 Tubing of iron or steel, of a kind used in drilling for oil or gas of an external diameter exceeding 73 mm
38.13 7306.30.00 In-line galvanized steel tubes, of high strength yield and customized tensile properties, with a thickness of at least 0.71 mm but not exceeding 4.57 mm, of specification ASTM A-1057
38.14 7306.30.00.41 Tubes of carbon steel, drawn over mandrel, of grade 1026, of specifications ASTM A513, ASTM A106 or ASTM A519
38.15 7306.30.00.49
  • (a) Tubes of carbon steel, drawn over mandrel, of grade 1026, of specifications ASTM A513, ASTM A106 or ASTM A519;
  • (b) Steel tubes, drawn over mandrel, of specification ASTM A513, of grade 4130, of an outside diameter of 1.25 inches with a wall thickness of 0.250 inch or of an outside diameter of 3.0 inches with a wall thickness of 0.312 inch;
  • (c) Steel tubes, drawn over mandrel, of grade 4130, of specification A513, with the following dimensions:
    • (i) 1.375 inches of diameter by 0.188 inch of wall thickness,
    • (ii) 1.625 inches of diameter by 0.25 inch of wall thickness,
    • (iii) 1.76 inches of diameter by 0.193 inch of wall thickness;
    • (iv) 2.0 inches of diameter by 0.188 inch of wall thickness,
    • (v) 2.0 inches of diameter by 0.25 inch of wall thickness,
    • (vi) 2.125 inches of diameter by 0.188 of wall thickness,
    • (vii) 2.25 inches of diameter by 0.188 inch of wall thickness,
    • (viii) 2.25 inches of diameter by 0.25 inch of wall thickness,
    • (ix) 2.375 inches of diameter by 0.2 inch of wall thickness,
    • (x) 2.625 inches of diameter by 0.25 inch of wall thickness,
    • (xi) 2.75 inches of diameter by 0.187 inch of wall thickness,
    • (xii) 3 inches of diameter by 0.25 inch of wall thickness,
    • (xiii) 3.25 inches of diameter by 0.375 inch of wall thickness,
    • (xiv) 3 inches of diameter by 0.285 inch of wall thickness,
    • (xv) 3.375 inches of diameter by 0.281 inch of wall thickness,
    • (xvi) 3.625 inches of diameter by 0.281 inch of wall thickness,
    • (xvii) 3.875 inches of diameter by 0.313 inch of wall thickness
38.16 7306.30.00.51 Round steel tubes, of an outside diameter of at least 1.0 inch but not exceeding 4.5 inches, with a coating of G120 hot-dipped galvanized zinc base coat, conversion coating and clear finish coating, with a wall thickness of at least 0.138 inch but not exceeding 0.153 inch
43 The portion of item 39 of Schedule 2 to the Order in column 2 is replaced by the following:
Item

Column 2

Goods
39
  • (a) Other tubes, pipes and hollow profiles of iron or steel, welded, of circular cross-section, of iron or non-alloy steel, that have all of the following characteristics:
    • Grade: 1008, 1010, 1015 or 1020
    • Yield/tensile strength: 40 000 psi yield / 45 000 psi tensile, 45 000 psi yield / 48 000 psi tensile or 50 000 psi yield / 55 000 psi tensile
    • Specification: ASTM A500 or A513
    • Diameter: 0.5 to 5 inches
    • Coating: in-line galvanizing process utilizing a triple layer of protection (first, a 99.99% pure SHG zinc coating is applied to the surface, followed by a conversion coating and a clear organic topcoat that seals the surface and produces a smooth, shiny finished product)
  • (b) Steel tubes, honed, of specification ASTM 513 Type 5, of an outside diameter of at least 1.875 inches but not exceeding 2.375 inches and an inside diameter of at least 1.500 inches but not exceeding 2.003 inches, with a minimum yield strength of 75 ksi;
  • (c) Steel tubes, drawn over mandrel, of specification ASTM 513 Type 5, of an outside diameter of at least 2.375 inches but not exceeding 2.625 inches and an inside diameter of at least 1.984 inches but not exceeding 2.241, with a minimum yield strength of 75 ksi
44 Schedule 2 to the Order is amended by adding the following after item 39:
Item

Column 1

Tariff Classification Number

Column 2

Goods
39.1 7306.61.00 Galvanized steel tubes, of square or rectangular cross section, of high yield strength and customized tensile properties, thickness of at least 0.89 mm but not exceeding 4.57 mm, with triple layer galvanized paint coating on the inside, an interior zinc paint coating, and an exterior hot-dip galvanized coating, of specification ASTM A-1057
45 Schedule 2 to the Order is amended by adding the following after item 40:
Item

Column 1

Tariff Classification Number

Column 2

Goods
40.1 7307.21.00 Welded stainless steel fasteners ("weld studs"), cold-forged, threaded or unthreaded, tapped, flanged or unflanged, of a diameter of at least 2 mm but not exceeding 10 mm
40.2 7307.91.00 Welded mild steel fasteners ("weld studs"), cold-forged, threaded or unthreaded, tapped, flanged or unflanged, of a diameter of at least 2 mm but not exceeding 10 mm
46 Schedule 2 to the Order is amended by adding the following after item 43:
Item

Column 1

Tariff Classification Number

Column 2

Goods
43.1 7308.30.00.28 Motor-operated (gear head) rolling industrial galvanized steel service door, of specification ASTM 653, with coating of galvanized zinc or zinc-iron alloy (galvannealed) by hot-dip process, with slat and hood finish
43.2 7308.90.00.95 Grills, air diffusers or ducts of iron or steel
43.3 7309.00.00 Reservoirs, tanks, vats and similar containers for any material other than compressed or liquefied gas, of iron or steel, of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
43.4 7310.10.00 Reconditioned or remanufactured 55 US gallon steel drums, of specification UN recertified, both tighthead and openhead
47 The portion of item 44 of Schedule 2 to the Order in column 2 is replaced by the following:
Item

Column 2

Goods
44 Cans which are to be closed by soldering or crimping, of iron or steel, of a capacity of less than 50 litres, whether or not lined or heat-insulted, but not fitted with mechanical or thermal equipment
48 Schedule 2 to the Order is amended by adding the following after item 44:
Item

Column 1

Tariff Classification Number

Column 2

Goods
44.01 7310.29.00.20 Cans, other than cans which are to be closed by soldering or crimping, of iron or steel, of a capacity of less than 50 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
44.02 7311.00.00 Containers for compressed or liquefied gas, of iron or steel
44.03 7312.10.00 Stranded wire, ropes, and cables, of iron or steel, not electrically insulated
44.04 7314.20.00 Modular welded wire mesh security walls of steel, with steel tube posts and hinged doors, powder-coated finish
44.05 7317.00.00 Nails of iron or steel, certified for steel and metal manufacturing construction, of a diameter of at least 4 mm but not exceeding 1 inch, coated or uncoated
44.06 7318.15.00
  • (a) Welded metal fasteners, "Weld Studs", cold forged or hot forged, threaded or unthreaded, headed or unheaded, tapped, with or without a collar, flanged and un-flanged, with diameter of at least 2 mm but not exceeding 32 mm;
  • (b) Insulation fasteners and weld pins for HVAC ductwork and insulation installation
44.07 7318.15.00.45
  • (a) Double-ended stud, of standard M8, with thread pitch of 1.25 mm and length of 37 mm, with external 6-lobe drive and 17.5 mm header point, with acid treatment and zinc or nickel coating;
  • (b) Double ended stud, of standard M8, with a thread pitch of 1.25 mm and length of 25 mm, pan head serrated neck, of grade 10.9, zinc coating;
  • (c) Double ended stud, of standard M6, with a thread pitch of 1.00 mm, of grade 10.9, with zinc coating;
  • (d) Projection weld stud of standard M8, with a length of 30 mm, with zinc coating;
  • (e) Round-interior studs, of standard M6, with a diameter of 18.75 mm, with a rod diameter of 0.3050 inch, plain coating;
  • (f) Studs, of M6 standards, with a 23.75 mm head diameter, with a 1.5 mm thread pitch, with a 25 mm length, with a rod diameter of 0.3450 inch
  • (g) Studs, of M6 standard, of 18.97 mm head diameter of the stud, with a thread pitch of 1.0 mm, with a length of 21 mm, with a rod diameter of 0.3050 inch;
  • (h) Studs, of M6 standard, with 18.97 mm head diameter, with a 1.0 mm thread pitch, with a length of 20 mm length, with a rod diameter of 0.3050 inch
44.08 7318.15.00.49
  • (a) Bolts, flange head, self-tapping, of standard M10, with a thread pitch of 1.5 mm and a length of 30 mm, meeting GM6202M, with a thread-forming surface treatment;
  • (b) Socket bolts, of standard M12, with a thread pitch of 1.75 mm and a length of 120 mm, of grade 8.8, with a corrosion-protective surface treatment, meeting automotive specifications;
  • (c) Clinch pins, of steel grades SAE 10B21 or 10B22, of 6 mm diameter and 12.5 mm length, with zinc-plated coating for corrosion protection;
  • (d) Bolts, hex flange, of standard M12, with a thread pitch of 1.75 mm and a length of 80.0 mm, of property class 10, with a corrosion-protective aluminum-organic surface coating;
  • (e) Bolts, hex flange, of standard M12, with a length of 120 mm, of property class 10, with a corrosion-protective aluminum-organic surface coating
44.09 7318.16.00.90
  • (a) Hex nuts, of projection weld type, of standard M12, with a thread pitch of 1.25 mm, of grade 8 steel, with a bare surface and rust-inhibitor treatment;
  • (b) Weld studs, of standard M6, with dimensions M6 by 1.0 mm by 16 mm, of specification GMW25M (8.8) with a maximum carbon content of 0.26% and plain coating;
  • (c) Studs, projection-weld, of standard M6, with a thread pitch of 1.0 mm, with a length of 25 mm, of specifications GMW25M
  • (d) Studs, projection weld type, of standard M6, of 1.0 mm thread pitch and 20 mm length, of property class 8.8;
  • (e) Weld hex nuts , of standard M8, of 1.25 mm thread pitch, with head diameter of 22.5 mm, of 0.590 inch wire rod
44.1 7318.21.00 Washers or retaining washers used in conjunction with "weld studs" or "weld pins" , with inside diameters of at least 1.6 mm but not exceeding 6 mm
44.11 7326.19.10 Flanged wellhead tubing heads and flanged casing head spools, in the rough, for use in the manufacture of wellhead tubing heads or casing head spools
44.12 7326.19.90 Other articles of iron or steel, forged or stamped, but not further worked, other than grinding balls and similar articles for mills
44.13 7326.90.90.90 Welded metal fasteners, "weld studs", of mild or stainless steel; cold forged, hot forged, threaded or unthreaded, headed or un-headed, tapped, with or without a collar, flanged or un-flanged diameters of at least 2 mm but not exceeding 32 mm
44.14 7601.20.00 Round bars of aluminum alloy, forge quality, of a diameter of at least 1 inch but not exceeding 12 inches, of grade 2014, 2219, 6061, 7075, or 7175, of specifications SAE-AMS-QQ-A-367 and QQ-A-225
44.15 7601.20.00.90 Aluminium alloys scrap ingot of casting alloys 380 or 390
49 The portion of item 45 of Schedule 2 to the Order in column 2 is amended by striking out "or" at the end of paragraph (a), by adding "or" at the end of paragraph (b) and by adding the following after paragraph (b):
Item

Column 2

Goods
45 (c) Aluminum plates, sheets and strip, of alloy AA1350 of a thickness exceeding 0.2 mm but less than 7 mm
50 Schedule 2 to the Order is amended by adding the following after item 45:
Item

Column 1

Tariff Classification Number

Column 2

Goods
45.01 7606.12.00.12 Aluminum plates, sheets and strip, rectangular (including square), of aluminum alloys, not clad, of a thickness of 7 mm or more
45.02 7606.12.00.20
  • (a) Flat-rolled aluminum coils, of alloy 5182 H24, of a thickness of 0.85 mm and a width of 194.3 mm, with a black fluoropolymer laminate coating;
  • (b) Flat-rolled aluminum coils, uncoated, of alloy 3104, of a nominal format equivalent to 355 mL or 473 mL, of a thickness of at least 0.254 mm but not exceeding 0.259 mm, of a width of at least 1454 mm but not exceeding 1735.2 mm;
  • (c) Flat-rolled aluminum coils, of alloy 3104, suitable for downstream forming and coating, uncoated, of a nominal format equivalent to 473 mL, with a thickness of at least 0.254 mm but not exceeding 0.259 mm, of a width of 1735.2 mm
45.03 7608.20.00 Aluminum tubes or pipes of aluminum alloys, cylindrical shape, seamless, of grade AA6101 or AA6063, of specification ASTMB241 or ASTMB317, with a wall thickness of at least 0.109 inch but not exceeding 0.500 inch, of an outer diameter not exceeding 10 inches,of a length of at least 5 feet but not exceeding 40 feet
45.04 7609.00.00
  • (a) Self locking vane and rail system in 2 or 4 inch configurations used to redirect airflow in HVAC ductwork;
  • (b) Adjustable elbows for round HVAC ductwork;
  • (c) Flexible duct connector to reduce vibration transmission in HVAC ductwork;
  • (d) HVAC ductwork components allowing for branching off main HVAC ductwork;
  • (e) Straight flange and cleat system including integrated mastic for joining HVAC ductwork;
  • (f) Rolled or stamped angle rings for connecting round HVAC ductwork
45.05 7610.10.00 Rolling steel fire door; aluminum construction with extruded aluminum rails, side lock, commercial grade hardware, 2 inch or 3 inch ten ball bearing rollers and galvanized 11 gauge hinges
45.06 7610.90.90.90 Aluminium structures designed to cover reservoirs, tanks and bulk material storage facilities
45.07 7616.10.00 Welded aluminum fasteners, "weld studs", cold forged, threaded or unthreaded, flanged or un-flanged, of a diameters of at least 2 mm but not exceeding 16 mm
45.08 7616.99.90 Monitor and tablet mounts and parts thereof, including rail mounts, monitor mount bases, of cast aluminum, suitable for agricultural use
45.09 8207.13.00 Rock drilling or earth boring tools with working part of cermets, and bits and parts
45.1 8207.19.00 Drill bits, drill bit bodies, rock drilling and earth boring tools, including parts
45.11 8308.20.00 Welded metal refractory fasteners of mild steel or stainless steel, "refractory anchors", cold forged or hot forged, unthreaded, headed or unheaded, tapped, with or without a collar. stamped, formed, cut, flanged or un-flanged, of a diameter of at least 2 mm but not exceeding 19 mm
45.12 8309.90.00
  • (a) Aluminum food can easy open ends;
  • (b) Steel metal closures, inside surface includes a polyester coating, of technical specifications ASTM T2, T3, T4, T5, DR7.5, or DR8, in nominal diameters of 38 mm, 40 mm, 48 mm, 58 mm, 63 mm, 70 mm, or 82 mm;
  • (c) Steel food can ends and lids, including those made from tinplate (steel coated with a thin layer of tin) or tin-free steel (electrolytic chromium-coated steel, ECCS), lined or unlined with a food-safe polymer coating
45.13 8311.30.00 Solder, welding wire, braze discs and coated braze rods
45.14 8418.69.90.80 Refrigeration units, of a kind used for trucks, trailers or vans
45.15 8425.42.00 Hydraulic jacks customized for above ground tanks

51 Schedules 3 and 4 to the Order are replaced by the Schedules 3 to 4.1 set out in the schedule to this Order.

Coming into Force

52 This Order comes into force on October 15, 2025, but if it is registered after that day, it comes into force on the day on which it is registered.

SCHEDULE

(Section 51)

SCHEDULE 3

(Section 4.1 and subparagraph 5(a)(ii))

Goods
Item

Column 1

Tariff Classification Number

Column 2

Goods

Column 3

Expiry date
1 7209.16.00 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not further worked than cold-rolled or cold-reduced, not clad, plated or coated, in coils, of a thickness exceeding 1 mm but less than 3 mm, of specification ASTM 1045, 1050, 1055 or 1067-1070 March 13, 2026
2 7209.17.00 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not further worked than cold-rolled or cold-reduced, not clad, plated or coated, in coils, of a thickness of at least 0.5 mm but not exceeding 1 mm, of specification ASTM 1045, 1050, 1055 or 1067-1070 March 13, 2026
3 7211.23.00 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, not further worked than cold-rolled or cold-reduced, containing by weight less than 0.25% carbon, of specification ASTM 1045, 1050, 1055 or 1067-1070 March 13, 2026
4 7211.29.00 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, not further worked than cold-rolled or cold-reduced, other, of specification of ASTM 1045, 1050, 1055 or 1067-1070 March 13, 2026
5 7304.41.00 Alloy 800 stainless steel cylindrical shape seamless tubes, cold drawn with a wall thickness of at least 0.054 inch but not exceeding 0.109 inch, with outer diameter 0.50 inch, 1.00 inch or and 1.25 inches and length of at least 215.38 inches but not exceeding 675.00 inches April 17, 2025
6 7308.90.00
  • (a) Redirective, non-gating crash cushion assembly consisting of high molecular weight/high density polyethylene (HMW/HDPE) energy-absorbing cylinders mounted on a self-contained or concrete backup structure;
  • (b) Gating, flared end terminal system for roadside W-beam guardrail applications, in 6-post and 8-post configurations;
  • (c) Tangent end-terminal for W-beam guardrail systems, consisting of galvanized steel components, including guardrail sections, extruder head, hardware, and posts
 March 5, 2027
7 7308.90.00.99 Redirective, non-gating crash cushion assembly to shield fixed roadside objects, consisting of a modular framework of steel beam panels enclosing a series of crushable energy-absorbing cartridges and a self-supporting plastic nose March 5, 2027
8 7318.16.00.85
  • (a) Weld nut with high-flange, for metal applications, with steel grade of 10, with metric thread sizes of 10 mm, and coating of polytetrafluoroethylene;
  • (b) Weld nut with high-flange (projection weld) for metal applications, with steel grade of 10, with metric thread sizes of at least 8 mm but not exceeding 12 mm, with coating of polytetrafluoroethylene
 April 2, 2026
9 7606.12.00.11 H21 recycled aluminum coil, conversion coated on both sides and a thickness of 0.027 inch March 5, 2027

SCHEDULE 4

(Section 4.2 and paragraph 5(a.1))

Goods
Item

Column 1

Business Number

Column 2

Tariff Classification Number

Column 3

Goods

Column 4

Conditions
1 100326198NP0004 4407.14.00 Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, untreated structural timbers of hem-fir (Western hemlock) (Tsuga heterophylla) and fir (Abies spp.)  
4407.19.00 Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, untreated structural timbers of other coniferous species  
2 100850635 0813.50.00 Mixed nuts, in shell, consisting of almonds, walnuts, hazelnuts, and pecans  
2008.19.90
  • (a) Pecans, blanched, dried, roasted, and glazed;
  • (b) Walnuts, small pieces, blanched, dried, and glazed, of a size of 5/16 inch or less
  
3 101569663RM0002 1006.30.00.91 Semi-milled or wholly milled long grain white rice, whether or not polished or glazed  
4 101803575RM0001 4012.90.90.30 Tire treads Imported for sale to company with business number 122644537
5 101928125RM 0802.99.00 Raw pecans, chopped  
6 101963361RM0001 4409.29.10 Unfinished solid white oak wood boards, either quarter sawn or live sawn, with tongue and groove edges, with plank widths of at least 4 inches but not exceeding 10 inches, for further processing into custom-finished wood flooring  
4409.29.90 Unfinished solid Hickory (Carya ovata) wood boards, live sawn, with tongue and groove edges, plank widths of at least 4 inches but not exceeding 6 inches, for further processing into custom-finished wood flooring  
7 103609160RM0001 4202.92.90 Holster of molded plastic with or without a spare cartridge for handheld conducted energy devices  
6211.33.00 Training suit made up of hook and loop panels, designed for use with handheld conducted energy device training cartridges that deploy hook-and-loop fastener darts  
8517.62.00
  • (a) Six bay dock for handheld conducted energy devices;
  • (b) Single bay dock for handheld conducted energy devices
  
9304.00.90 Handheld conducted energy devices  
9306.30.90 Cartridges for handheld conducted energy devices formed from plastic, containing metal probes connected to 25 inches wires that are deployed by a compressed nitrogen charge  
8 104275359RT0001 4819.10.00 Corrugated packaging and raw materials used for further processing into specific packaging  
9 104671094RT0007 8307.10.00   Imported for sale to company with business number 872894332
8418.50.10   Imported for sale to company with business number 872894332
8419.81.00.20   Imported for sale to company with business number 872894332
8419.81.00.90   Imported for sale to company with business number 872894332
9403.20.00.99   Imported for sale to company with business number 872894332
10 104813662RM0001 1006.30.00 Semi-milled or wholly milled rice, whether or not polished or glazed, of the following types:
  • (a) sweet rice;
  • (b) long grain rice;
  • (c) white parboiled rice
  
11 105604938RM0001 8418.50.10   Imported for sale to company with business number 872894332
12 121054431RM0001 8516.50.00   Imported for sale to company with business number 872894332
9403.20.00.20   Imported for sale to company with business number 872894332
13 121478390RC0001 4823.69.00.90 Custom paperboard trays  
14 122463953RM0001 8418.69.90   Imported for sale to company with business number 872894332
8419.81.00.90   Imported for sale to company with business number 872894332
15 122574585 3925.90.00.20 Polymer matrix of high-density polyethylene netting, of specification ASTM D-638, with 0.100 inch thick strands and 0.150 inch spacing between strands, of a roll length of at least 100 feet but not exceeding 150 feet, of a roll width of at least 12 inches but not exceeding 60 inches Imported for sale to the Ontario Ministry of Transportation (MTO)
16 128522992BN0001 8309.90.00 Can lids  
17 133405829RP0001 1701.14.00 Organic light brown sugar  
1701.99.90.30 Finely milled organic cane sugar, blended with organic starch  
1703.10.90
  • (a) Organic molasses;
  • (b) Organic light molasses;
  • (c) Fancy molasses
  
18 133586628RM0001 8309.90.00 Stoppers, caps and lids of base metal  
19 140851943RC0003 4408.90.00 Veneer sheets, of conifers, of a thickness of 1.6 mm or 2.1 mm  
20 143460764RM0001 4407.11.00.23 Green and dry wood, sawn boards, of white pine, of grade stained, clear, premium, or select, of a width of at least 3 feet but not exceeding 10 feet, of a length of at least 4 feet but not exceeding 16 feet  
21 718866494RP0001 3918.90.10 Ethylene vinyl acetate/polyethylene (EVA/PE) foam sheet, with a thickness of 6 mm, with a width of 40 inches and length of 80 inches, with high-performance pressure-sensitive adhesive (PSA 9077) coating  
22 731056107RT0001 8806.23.00 Unmanned aircraft, for remote-controlled flight only, with maximum take-off weight at least 7 kg but not exceeding 25 kg Goods imported to fulfill contract CW2384495
23 770095529RM0001 8418.69.90   Imported for sale to company with business number 872894332
24 776853285 9506.91.00.90 Articles and equipment for general physical exercise  
25 802556332RM0001 4819.20.00 Non-corrugated cardboard boxes with pre-printed graphic design  
26 805038247RT0001 4408.90.00 Green wood, veneer, of red alder, white oak, douglas fir, or douglas fir VG, of a width of at least 5.5 feet but not exceeding 12 feet, of a length of at least 86 feet but not exceeding 144 feet, of premium slicing grade  
27 810199612RM0001 1806.90.90.19 Chocolate chips of the following types:
  • (a) 53% dark chocolate;
  • (b) milk chocolate;
  • (c) butter scotch flavoured;
  • (d) semi-sweet;
  • (e) caramel flavored
 Imported for sale to company with business number 137466199 RT0001 or 122235922RT0001
28 824659155RM0001 1302.19.00.90 Konjac flour, of grade G4  
29 825387335RT0001 0805.10.00 Fresh oranges  
0805.40.00 Fresh grapefruit  
0805.50.00 Fresh lemons and limes  
30 827622549 4407.91.00.11 Green and dry wood, sawn boards, of red oak, of grade 3A, of a thickness of 1 inch, of a width of at least 4 inches but not exceeding 30 inches, of a length of at least 4 feet but not exceeding 16 feet  
4407.91.00.91 Green and dry wood (sawn boards) of white oak, of grade 1C of a thickness of 1 inch (4/4), with a width of at least 4 inches but not exceeding 30 inches, with a length of at least 4 feet but not exceeding 16 feet  
4407.99.00 Green and dry wood (sawn boards) of hickory or walnut, of grade 1C, with a thickness of 1 inch (4/4), with a width of at least 4 inches but not exceeding 30 inches, with a length of 4 feet but not exceeding 16 feet  
4411.13.00.90 Medium-density fiberboard, of a thickness of at least 5 mm but not exceeding 9 mm, of a width of at least 4 feet but not exceeding 16 feet, of a length of at least 4 feet but not exceeding 30 feet  
31 833044035RC0001 0805.10.00.10 Oranges (Valencia variety), maximum size 110 mm, minimum size 60 mm  
0805.22.00 Clementines (Corsica variety), certified organic, maximum size 70 mm, minimum size 45 mm  
0805.40.00.10 Pink grapefruit, maximum size 110 mm, minimum size 70 mm  
0805.50.00 Lemons (Eureka variety) and limes (Latifolia variety), certified organic, with a maximum size 110 mm for lemons and 70 mm for limes, and a minimum size of 55 mm of lemons and 45 mm for limes  
32 843741349MC0002 4407.91.00 Wood of oak rough sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, kiln dried, of a length of at least 8 feet but not exceeding 16 feet, of nominal sizes 4/4 (1 inch), 5/4 (1.25 inches), 6/4 (1.5 inches) and 8/4 (2 inches)  
4407.93.00 Wood of maple rough sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, kiln dried, of a length of at least 8 feet but not exceeding 16 feet, of nominal sizes 4/4 (1 inch), 5/4 (1.25 inches), 6/4 (1.5 inches) and 8/4 (2 inches)  
4407.97.00 Wood of poplar and aspen rough sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, kiln dried, of a length of at least 8 feet but not exceeding 16 feet, of nominal sizes 4/4 (1 inch), 5/4 (1.25 inches), 6/4 (1.5 inches) and 8/4 (2 inches)  
4407.99.00 Wood rough sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, kiln dried, of a length of at least 8 feet but not exceeding 16 feet, of nominal sizes 4/4 (1 inch), 5/4 (1.25 inches), 6/4 (1.5 inches) and 8/4 (2 inches)  
33 844690347RM0001 6307.90.99.90 First aid tourniquet, one-handed application, consisting of a textile strap with a windlass (plastic or aluminum) or ratcheting self-locking mechanism From March 4, 2025 to July 31, 2025, for imports for sale to York Region Community and Health Services. or from March 4 to April 30, 2026, for imports for sale to Government of Saskatchewan
34 849922893RT0001 1006.30.00 Semi-milled or wholly milled rice, whether or not polished or glazed  
35 858245772RM0001 8419.81.00.90   Imported for sale to company with business number 872894332
36 864676531RM0001 8419.81.00   Imported for sale to company with business number 872894332
8516.72.90   Imported for sale to company with business number 872894332
37 87965143RM0001 1902.19.23.30 Unprepared pasta of the following types:
  • (a) 1.125 inch heavy wall elbow;
  • (b) 1.15 inch mafalda;
  • (c) 1.25 inch ribbons;
  • (d) 1.25 inch penne rigate;
  • (e) 1/2 cut cavatappi;
  • (f) mini rigatoni;
  • (g) 1.5 inch rotini
  
38 891093452RM0001 3924.10.00   Imported for sale to company with business number 872894332
9403.70.90   Imported for sale to company with business number 872894332
39 891577132RT001 0207.14.91 Boneless or bone in frozen chicken cuts and offal  
1602.32.93 Frozen cooked or processed chicken parts, bone in or boneless  
40 892695016RC0001 8418.69.90.70 Refrigeration condensing units  
41 893039321RM0001 3923.21.90.90 Printed polyethylene bags with a bottom gusset, butterfly vents and laser perforation  
4819.20.00.90 Cartons, boxes and cases, folding, of non-corrugated paper or paperboard  
42 893736447RC0003 1006.30.00 Non-aromatic rice varieties of either long or medium grain, without additives  
43 894634112 3925.10.00.00   Imported for sale to company with business number 887258960
8418.69.90.40   Imported for sale to company with business number 887258960
8516.10.90   Imported for sale to company with business number 887258960
44 896297645RM0001 3925.10.00 Agricultural water tanks, of medium-density polyethylene with UV inhibitors, with translucent walls for level visibility and US gallon indicators, designed for liquids with a specific gravity of up to 1.7 relative to water at 4°C, equipped with polymer baffles for fluid control, with molded-in legs and band locators for tie-down, of a capacity of 3250 US gallons, 3750 US gallons or 4250 US gallons  
45 898667639RM0001 8202.31.00
  • (a) Circular, scalloped, saw blades for high-speed circular saws, with a heat-traded steel body, with an outside diameter of 10 inches, rated for operating speeds up to 5,000 rpm;
  • (b) Reinforced abrasive cut-off wheel for high-speed circular saws, with an outside diameter of 14 inches, rated for operating speeds up to 5,000 rpm
  
 
8205.59.90 Snap to connect release forks, deburring blades, swivel sockets and hose pusher bars of chrome-plated high-carbon steel, for hydraulic service  
8207.20.00 Two-piece collet sets of hardened alloy-steel cages, for positive-stop crimping tools, designed for nominal diameters of at least 1/4 inch but not exceeding 2 inches, with precision spacer rings  
8207.30.00.20 Heavy-duty collets and spacer rings of hardened high-alloy steel, for four-wire spiral hoses and fittings, of sizes rated for crimp forces achieving at least 35 mm but not exceeding 42 mm, rated for operating crimp pressures of approximately 62 MPa  
8207.30.00.90 Ancillary crimp tooling including die rings, adapters, storage cages, pusher blocks, used in hydraulic crimping operations, of through-hardened high-alloy tool steel  
8208.20.00 Circular cutting media for hydraulic-hose preparations, with 7 inch or 14 inch diameter blades and reinforced cut-off wheels, high-speed-steel bodies with hollow-ground, scalloped teeth or bonded-abrasive rims, and 25.4 mm arbor hole, compatible with industrial hose-cutting saws  
9403.20.00.99 Powder-coated mild-steel storage for crimp tooling and hose assembly components, with a 15-drawer die-ring cabinet with foam indexing and single-door hose-component cabinet, supplied with M8 anchoring hardware  

SCHEDULE 4.1

(Section 4.21 and paragraph 5(a.2)))

Goods
Item

Column 1

Business Number

Column 2

Tariff Classification Number

Column 3

Goods

Column 4

Period

Column 5

Conditions
1 100086768RC0001 7208.26.00
  • (a) Coil that has all of the following characteristics:
    • Grade: LAH340Y410T
    • Specification: MS.50002
    • Thickness: 0.138 inches
    • Width: 26.575 inches
    • Length: 12.205 inches
    • Coating: P&O
  • (b) Coil that has all of the following characteristics:
    • Grade: HR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.138 inches
    • Width: 26.75 inches
    • Length: 8.5 inches
    • Coating: P&O
 From March 13, 2025 to December 31, 2027    
7208.27.00
  • (a) Coil that has all of the following characteristics:
    • Grade: HR340LA
    • Specification: GMW2M-ST-S
    • Thickness: 0.079 inches
    • Width: 47.44 inches
    • Length: 15.905 inches
    • Coating: P&O
  • (b) Coil that has all of the following characteristics:
    • Grade: HR340LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.079 inches
    • Width: 30 inches
    • Length: 21.5 inches
    • Coating: P&O
 From March 13, 2025 to December 31, 2027  
7208.38.00.10
  • (a) Coil that has all of the following characteristics:
    • Grade: HR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.118 inches
    • Width: 33.5 inches
    • Length: 9.125 inches
    • Coating: P&O
  • (b) Coil that has all of the following characteristics:
    • Grade: HR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.118 inches
    • Width: 34.5 inches
    • Length: 9.125 inches
    • Coating: P&O
  • (c) Coil that has all of the following characteristics:
    • Grade: HR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.138 inches
    • Width: 28.5 inches
    • Length: 9.25 inches
    • Coating: P&O
 From March 13, 2025 to December 31, 2026  
7208.39.00 Coil that has all of the following characteristics:
  • Grade: HR270LA
  • Specification: GMW3032M-ST-S
  • Thickness: 0.091 inches
  • Width: 24.016 inches
  • Length: 9.646 inches
  • Coating: P&O
 From March 13, 2025 to December 31, 2027  
7208.53.00 Blank, cut to length, that has all of the following characteristics:
  • Grade: HR270LA
  • Specification: GMW3032M-ST-S
  • Thickness: 0.118 inches
  • Width: 24 inches
  • Length: 86.85 inches
  • Coating: P&O
 From March 13, 2025 to December 31, 2027  
7209.16.00.90
  • (a) Coil that has all of the following characteristics:
    • Grade: CR3
    • Specification: GMW2M-ST-S
    • Thickness: 0.047 inches
    • Width: 32.362 inches
    • Length: 6.693 inches
  • (b) Coil that has all of the following characteristics:
    • Grade: CR3
    • Specification: GMW2M-ST-S
    • Thickness: 0.049 inches
    • Width: 26.7 inches
    • Length: 6.5 inches
  • (c) Coil that has all of the following characteristics:
    • Grade: CR980T/700Y-MP-LCE
    • Specification: GMW3399M-ST-S
    • Thickness: 0.047 inches
    • Width: 47.795 inches
    • Length: 9.252 inches
  • (d) Coil that has all of the following characteristics:
    • Grade: CR420LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.043 inches
    • Width: 42.756 inches
    • Length: 6.375 inches
  • (e) Coil that has all of the following characteristics:
    • Grade: CR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.059 inches
    • Width: 39.75 inches
    • Length: 13.3 inches
 From March 13, 2025 to December 31, 2027  
7210.30.00 Blank, cut to length, that has all of the following characteristics:
  • Grade: CR180B2
  • Specification: GMW3032M-ST-S
  • Thickness: 0.059 inches
  • Width: 32.677 inches
  • Length: 14.094 inches
  • Coating: EG 70G70G
 From March 13, 2025 to December 31, 2027  
7210.49.00.607210.49.00.70
  • (a) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR3
    • Specification: GMW2M-ST-S
    • Thickness: 0.035 inches
    • Width: 58.74 inches
    • Length: 16.457 inches
    • Coating: HDG 90G90G
  • (b) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR3
    • Specification: GMW2M-ST-S
    • Thickness: 0.039 inches
    • Width: 68.504 inches
    • Length: 37.008 inches
    • Coating: HDG 70G70G
  • (c) Coil that has all of the following characteristics:
    • Grade: CR420LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.039 inches
    • Width: 28.5 inches
    • Length: 8.8 inches
    • Coating: HDG 60G60G
  • (a) Coil that has all of the following characteristics:
    • Grade: LAC240Y320T
    • Specification: MS.50002
    • Thickness: 0.0787 inches
    • Width: 27.56 inches
    • Length: 40.35 inches
    • Coating: HDG 60G60G
  • (b) Coil that has all of the following characteristics:
    • Grade: LAC240Y320T
    • Specification: MS.50002
    • Thickness: 0.0787 inches
    • Width: 27.6 inches
    • Length: 37.8 inches
    • Coating: HDG 60G60G
  • (c) Coil that has all of the following characteristics:
    • Grade: LAC340Y410T
    • Specification: MS.50002
    • Thickness: 0.0787 inches
    • Width: 36.4 inches
    • Length: 31.1 inches
    • Coating: HDG 60G60G
  • (d) Coil that has all of the following characteristics:
    • Grade: LAH340Y410T
    • Specification: MS.50002
    • Thickness: 0.098 inches
    • Width: 30.95 inches
    • Length: 8.25 inches
    • Coating: HDG 60G60G
  • (e) Coil that has all of the following characteristics:
    • Grade: LAH340Y410T
    • Specification: MS.50002
    • Thickness: 0.098 inches
    • Width: 38.5 inches
    • Length: 13.55 inches
    • Coating: HDG 60G60G
  • (f) Coil that has all of the following characteristics:
    • Grade: LAH340Y410T
    • Specification: MS.50002
    • Thickness: 0.098 inches
    • Width: 38.7 inches
    • Length: 13.3 inches
    • Coating: HDG 60G60G
  • (g) Coil that has all of the following characteristics:
    • Grade: LAH340Y410T
    • Specification: MS.50002
    • Thickness: 0.118 inches
    • Width: 42.5 inches
    • Length: 17.6 inches
    • Coating: HDG 60G60G
  • (h) Coil that has all of the following characteristics:
    • Grade: LAH340Y410T
    • Specification: MS.50002
    • Thickness: 0.1185 inches
    • Width: 27.64 inches
    • Length: 13 inches
    • Coating: HDG 60G60G
  • (i) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR3
    • Specification: GMW2M-ST-S
    • Thickness: 0.047 inches
    • Width: 43.504 inches
    • Length: 11.713 inches
    • Coating: HDG 70G70G
  • (j) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR3
    • Specification: GMW2M-ST-S
    • Thickness: 0.047 inches
    • Width: 44.488 inches
    • Length: 13.819 inches
    • Coating: HDG 70G70G
  • (k) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR3
    • Specification: GMW2M-ST-S
    • Thickness: 0.098 inches
    • Width: 70.236 inches
    • Length: 14.173 inches
    • Coating: HDG 60G60G
  • (l) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR270LA
    • Specification: GMW3032M-ST-S or GMW16056 type A
    • Thickness: 0.071 inches
    • Width: 29.3 inches
    • Length: 107 inches
  • (m) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR270LA
    • Specification: GMW3032M-ST-S or GMW16056 type A
    • Thickness: 0.071 inches
    • Width: 29.6 inches
    • Length: 111 inches
  • (n) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR270LA
    • Specification: GMW3032M-ST-S or GMW16056 type C
    • Thickness: 0.071 inches
    • Width: 29.3 inches
    • Length: 107 inches
    • Coating: HDG 60G60G
  • (o) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR270LA
    • Specification: GMW3032M-ST-S or GMW16056 type C
    • Thickness: 0.071 inches
    • Width: 29.6 inches
    • Length: 111 inches
    • Coating: HDG 60G60G
  • (p) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR180B2
    • Specification: GMW3032M-ST-S
    • Thickness: 0.059 inches
    • Width: 29.488 inches
    • Length: 14.508 inches
    • Coating: HDG 70G70G
  • (q) Blank, cut to length, that has all of the following characteristics:
    • Grade: HR550LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.071 inches
    • Width: 32.25 inches
    • Length: 59.25 inches
    • Coating: HDG 60G60G
  • (r) Blank, cut to length, that has all of the following characteristics:
    • Grade: HR550LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.071 inches
    • Width: 44.45 inches
    • Length: 59.25 inches
    • Coating: HDG 60G60G
  • (s) Blank, cut to length, that has all of the following characteristics:
    • Grade: HR550LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.071 inches
    • Width: 47.205 inches
    • Length: 59.37 inches
    • Coating: HDG 60G60G
  • (t) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR780T/420Y-DP
    • Specification: GMW3399M-ST-S
    • Thickness: 0.055 inches
    • Width: 52.362 inches
    • Length: 14.921 inches
    • Coating: HDG 60G60G
  • (u) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR04
    • Specification: MS.50002
    • Thickness: 0.098 inches
    • Width: 28.189 inches
    • Length: 78.465 inches
    • Coating: HDG 60G60G
  • (v) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR270LA
    • Specification: GMW3032M-ST-S or GMW16056 type A
    • Thickness: 0.071 inches
    • Width: 27 inches
    • Length: 108 inches
  • (w) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR270LA
    • Specification: GMW3032M-ST-S or GMW16056 type A
    • Thickness: 0.063 inches
    • Width: 28.85 inches
    • Length: 104.33 inches
  • (x) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR270LA
    • Specification: GMW3032M-ST-S or GMW16056 type A
    • Thickness: 0.106 inches
    • Width: 23.75 inches
    • Length: 105.57 inches
  • (y) Coil that has all of the following characteristics:
    • Grade: CR340 LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.051 inches
    • Width: 33.25 inches
    • Length: 5 inches
    • Coating: HDG 60G60G
  • (z) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR240LA
    • Specification: GMW3032M-ST-S or GMW16056 type C
    • Thickness: 0.063 inches
    • Width: 27 inches
    • Length: 99.5 inches
    • Coating: HDG 60G60G
 From March 13, 2025 to December 31, 2027  
7211.19.00.10 Coil that has all of the following characteristics:
  • Grade: CR270LA
  • Specification: GMW3032M-ST-S
  • Thickness: 0.079 inches
  • Width: 22.598 inches
  • Length: 3.28 inches
 From March 13, 2025 to December 31, 2027  
7211.19.00.90
  • (a) Coil that has all of the following characteristics:
    • Grade: HR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.091 inches
    • Width: 22 inches
    • Length: 5.25 inches
    • Coating: P&O
  • (b) Coil that has all of the following characteristics:
    • Grade: HR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.091 inches
    • Width: 22.17 inches
    • Length: 7 inches
    • Coating: P&O
  • (c) Coil that has all of the following characteristics:
    • Grade: HR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.091 inches
    • Width: 22.5 inches
    • Length: 3.752 inches
    • Coating: P&O
  • (d) Coil that has all of the following characteristics:
    • Grade: HR340LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.071 inches
    • Width: 8.937 inches
    • Length: 7.5 inches
    • Coating: P&O
  • (e) Coil that has all of the following characteristics:
    • Grade: MS.50002
    • Specification: LAH240Y320T
    • Thickness: 0.067 inches
    • Width: 10.2 inches
    • Length: 8.5 inches
    • Coating: P&O
  • (f) Blank, cut to length, that has all of the following characteristics:
    • Grade: HR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.118 inches
    • Width: 21.5 inches
    • Length: 85 inches
    • Coating: P&O
 From March 13, 2025 to December 31, 2027  
7211.23.00 Coil that has all of the following characteristics:
  • Grade: CR3
  • Specification: GMW2M-ST-S
  • Thickness: 0.04 inches
  • Width: 13.1 inches
  • Length: 8.86 inches
 From March 13, 2025 to December 31, 2027  
7212.20.00.30
  • (a) Coil that has all of the following characteristics:
    • Grade: CR180B2
    • Specification: GMW3032M-ST-S
    • Thickness: 0.031 inches
    • Width: 12.992 inches
    • Length: 4.252 inches
    • Coating: HDG 60G60G
  • (b) Coil that has all of the following characteristics:
    • Grade: CR180B2
    • Specification: GMW3032M-ST-S
    • Thickness: 0.033 inches
    • Width: 15.5 inches
    • Length: 10 inches
    • Coating: HDG 60G60G
  • (c) Coil that has all of the following characteristics:
    • Grade: CR180B2
    • Specification: GMW3032M-ST-S
    • Thickness: 0.039 inches
    • Width: 16.339 inches
    • Length: 11.654 inches
    • Coating: HDG 60G60G
  • (d) Coil that has all of the following characteristics:
    • Grade: CR180B2
    • Specification: GMW3032M-ST-S
    • Thickness: 0.028 inches
    • Width: 12.5 inches
    • Length: 2.65 inches
    • Coating: EG 60G60G
 From March 13, 2025 to December 31, 2027  
7212.30.00.30
  • (a) Coil that has all of the following characteristics:
    • Grade: CR180B2
    • Specification: GMW3032M-ST-S
    • Thickness: 0.031 inches
    • Width: 12.992 inches
    • Length: 4.252 inches
    • Coating: HDG 60G60G
  • (b) Coil that has all of the following characteristics:
    • Grade: CR180B2
    • Specification: GMW3032M-ST-S
    • Thickness: 0.033 inches
    • Width: 15.5 inches
    • Length: 10 inches
    • Coating: HDG 60G60G
  • (c) Coil that has all of the following characteristics:
    • Grade: CR180B2
    • Specification: GMW3032M-ST-S
    • Thickness: 0.039 inches
    • Width: 16.339 inches
    • Length: 11.654 inches
    • Coating: HDG 60G60G
 From March 13, 2025 to December 31, 2027  
7212.30.00.40
  • (a) Coil that has all of the following characteristics:
    • Grade: LAH340Y410T
    • Specification: MS.50002
    • Thickness: 0.1185 inches
    • Width: 14.87 inches
    • Length: 71.43 inches
    • Coating: HDG 60G60G
  • (b) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR240LA
    • Specification: GMW3032M-ST-S or GMW16056 type A
    • Thickness: 0.063 inches
    • Width: 23.476 inches
    • Length: 81 inches
  • (c) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR270LA
    • Specification: GMW3032M-ST-S or GMW16056 type C
    • Thickness: 0.071 inches
    • Width: 20.445 inches
    • Length: 107.008 inches
    • Coating: HDG 60G60G
  • (d) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.071 inches
    • Width: 20.445 inches
    • Length: 107.008 inches
  • (e) Blank, cut to length, that has all of the following characteristics:
    • Grade: CR340LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.079 inches
    • Width: 16.25 inches
    • Length: 101.125 inches
  • (f) Blank, cut to length, that has all of the following characteristics:
    • Grade: IFC180Y330T
    • Specification: MS.50002
    • Thickness: 0.118 inches
    • Width: 20 inches
    • Length: 34.5 inches
    • Coating: HDG 60G60G
 From March 13, 2025 to December 31, 2027  
2 100101070RC 3924.90.00.99 Elevated pet food bowl frame of plastic, with adjustable legs and stainless steel bowl inserts From March 6, 2025 to April 10, 2025  
3 100124221RM0002 7309.00.00.70 2,500 US gallon water tanks of carbon steel, designed for non-pressurized liquid storage From March 13, 2025 and March 27, 2025  
4 101400760RT0001 7218.99.00.90 Stainless steel in ingots or other primary forms: semi-finished products of stainless steel    
7219.21.00 Flat-rolled products of stainless steel, of a width 600 mm or more, not further worked than hot-rolled, not in coils, of a thickness exceeding 10 mm    
7220.11.00 Hot-rolled stainless steel plate, of a width of less than 600 mm , of a thickness of 4.75 mm or more    
7220.20.00 Flat-rolled products of stainless steel, not further worked than cold-rolled or cold-reduced, of a width of less than 600 mm    
7222.11.00.91 Hot-rolled stainless steel bars, round, of a diameter of 25 mm or more    
7222.19.00.11 Hot-rolled stainless steel flat bars, of a diameter of 25 mm or more    
7222.19.00.29 Hot-rolled stainless steel bars, of rectangular cross section    
7222.20.00 Cold-formed or cold-finished stainless steel bars, of rectangular cross section    
7222.30.00 Other bars and rods of stainless steel: angles, shapes and sections of stainless steel    
7222.30.00.30 Other bars and rods of stainless steel: angles, shapes and sections of stainless steel, high nickel alloy    
7228.50.00.90 Other bars and rods of solid alloy steel, not further worked than cold-formed or cold-finished    
7228.60.00 300M AMS 6419 alloy steel round bars    
7326.19.90 Steel forgings    
7326.90.90.90 Open-die forged steel plate    
7604.29.00 Aluminum alloy rods and bars    
7606.12.00 Aluminum alloy plate, not clad    
7608.20.00 Aluminum tubes and pipes, of aluminum alloys    
7616.99.90.29 Aluminum castings    
7616.99.90.30 Aluminum forgings    
5 104671094RT0007 7324.10.00.10   From March 13, 2025 to October 31, 2025 Imported for sale to company with business number 872894332
7324.10.00.90   From March 13, 2025 to October 31, 2025 Imported for sale to company with business number 872894332
6 119873420RM0002 7225.99.00
  • (a) Steel coils that have all of the following characteristics:
    • Grade: Ductibor 1000
    • Thickness: 1.14 mm to 2 mm
    • Width:1131 mm to 1240 mm
    • Coating: Al-Si
  • (b) Steel coils that have all of the following characteristics:
    • Grade: Usibor 1500
    • Thickness: 1.4 mm
    • Width: 1628 mm
    • Coating: Al-Si
 From March 13, 2025 to December 31, 2027  
7 123307597RM0013 7210.49.00.60     Imported for sale to vehicle manufacturers
7212.30.00.30     Imported for sale to vehicle manufacturers
7318.16.00.90     Imported for sale to vehicle manufacturers
7318.19.00     Imported for sale to vehicle manufacturers
8 123307597RM0019 7208.39.00     Imported for sale to vehicle manufacturers
7209.16.00.90     Imported for sale to vehicle manufacturers
7210.30.00     Imported for sale to vehicle manufacturers
7212.30.00.30     Imported for sale to vehicle manufacturers
7212.30.00.40     Imported for sale to vehicle manufacturers
7225.92.00.30     Imported for sale to vehicle manufacturers
7225.92.00.40     Imported for sale to vehicle manufacturers
7318.15.00.45     Imported for sale to vehicle manufacturers
7318.16.00.90     Imported for sale to vehicle manufacturers
7318.19.00     Imported for sale to vehicle manufacturers
9 123307597RM0020 7210.11.00     Imported for sale to vehicle manufacturers
7211.19.00.90     Imported for sale to vehicle manufacturers
7211.23.00     Imported for sale to vehicle manufacturers
10 123307597RM0022 7208.27.00     Imported for sale to vehicle manufacturers
7210.49.00.60     Imported for sale to vehicle manufacturers
7211.23.00     Imported for sale to vehicle manufacturers
7212.30.00.40     Imported for sale to vehicle manufacturers
7226.91.00     Imported for sale to vehicle manufacturers
7318.15.00.45     Imported for sale to vehicle manufacturers
7318.16.00.90     Imported for sale to vehicle manufacturers
11 123307597RM0029 7212.30.00.20     Imported for sale to vehicle manufacturers
7212.30.00.30     Imported for sale to vehicle manufacturers
7226.99.00.12     Imported for sale to vehicle manufacturers
7226.99.00.13     Imported for sale to vehicle manufacturers
12 123307597RM0030 7208.27.00     Imported for sale to vehicle manufacturers
7210.49.00.50     Imported for sale to vehicle manufacturers
7210.49.00.60     Imported for sale to vehicle manufacturers
7212.20.00.30     Imported for sale to vehicle manufacturers
7212.30.00.20     Imported for sale to vehicle manufacturers
7212.30.00.30     Imported for sale to vehicle manufacturers
7212.30.00.40     Imported for sale to vehicle manufacturers
7225.91.00.20     Imported for sale to vehicle manufacturers
7225.92.00.20     Imported for sale to vehicle manufacturers
7318.15.00.45     Imported for sale to vehicle manufacturers
7318.15.00.49     Imported for sale to vehicle manufacturers
7318.16.00.90     Imported for sale to vehicle manufacturers
13 123307597RM0033 7208.27.00     Imported for sale to vehicle manufacturers
7210.49.00.70     Imported for sale to vehicle manufacturers
7211.19.00.90     Imported for sale to vehicle manufacturers
7212.30.00     Imported for sale to vehicle manufacturers
7226.99.00.99     Imported for sale to vehicle manufacturers
14 123307597RM0040 7208.27.00     Imported for sale to vehicle manufacturers
7211.19.00.90     Imported for sale to vehicle manufacturers
7212.30.00.40     Imported for sale to vehicle manufacturers
15 127109387RT0001 7308.90.00.99 The following guard rail end barrier systems, of specification AASHTO M180, NCHRP-350 (test level TL-3) and MASH (test level TL-3), with an A123 coating:
  • (a) FLEAT-SP;
  • (b) FLEAT 350;
  • (c) SKT 350;
  • (d) SKT-SP;
  • (e) BEAT;
  • (f) FLEAT MT;
  • (g) BEAT MT
 From March 13, 2025 to April 22, 2027 Imported for supply to the ministère des Transports et de la Mobilité durable of Quebec
16 129553673 7306.30.00   March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960
7307.22.00   March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960
7307.23.00   March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960
7307.29.99   March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960
7307.99.00   March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960
7309.00.00   March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960
7312.10.00   March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960
7318.14.00   March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960
7318.15.00   March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960
7318.16.00   March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960
7318.19.00   March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960
7318.22.00   March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960
7325.99.99   March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960
7326.90.90   March 13, 2025 to January 1, 2026 Imported for supply to company with business number 887258960
17 133586628RM0001 7310.29.00 Tanks, casks, drums or cans, of a capacity of less than 50 litres    
18 139692198RM0002 7220.20.00.90
  • (a) Type 435 stainless steel coil, with a thickness of 0.5 mm, of a width of 324 mm, 400 mm or 495.3 mm, coated with protective film;
  • (b) Type 436 stainless steel coil, with a thickness of 0.5 mm, with a width of 50.8 mm, coated protective film;
  • (c) Type 436 stainless steel coil, with a thickness of 0.4826 mm, of a width of 222.25 mm, 450.9 mm, 596.9 mm, or 736.6 mm, coated protective film;
  • (d) Type 430 stainless steel coil, with a thickness of 0.4 mm, with a width of 28.44 mm, used to produce a roof ditch molding
 From March 13, 2025 to December 31, 2025  
19 140433293RC0002 7214.99.00 Bars of steel, round, of grade 40, 50 or 60, of specification CSA G40.21, ASTM A706 or ASTM A615, of a diameter of at least 0.75 inch but not exceeding 1.5 inches, of a length of at least 20 feet but not exceeding 40 feet, coated with epoxy per ASTM A775/A775M. From March 13, 2025 to December 31, 2025  
20 712584135RM0001 9506.91.00.90 Articles and parts of steel, galvanized steel, high-density polyethylene (HDPE) plastic or aluminum, used to construct outdoor play structures, including installation kits From March 21, 2025 to April 4, 2025 Imported for sale to company with the business number 857850044RT00001
21 721202018 7309.00.00
  • (a) Bolted steel glass coated wall panels for a 3.84 million litre custom-built potable water storage tank, of a thickness of 0.2188 inch, 0.25 inch or 0.3125 inch, with AWWA D103 standard, with a width of 57 inches, with a length of 112.03 inches;
  • (b) Bolted steel glass coated wall panels for a 3.84 million litre custom-built potable water storage tank of a thickness of 0.5 inch compliant with AWWA D103 standard, with a width of 18.92 inches, with a length of 116.29 inches
 From March 13, 2025 to January 31, 2026 Imported for sale to company with business number 104625660 or 108128166
7610.90.90.10 Aluminum dome, disassembled, for a 3.84 million litre custom potable water storage tank, of AWWA D103 standard From March 13, 2025 to January 31, 2026 Imported for sale to company with business number 104625660 or 108128166
22 723167151RM0001 9504.30.00 Games operated by coins, bank notes, bank cards, tokens or by other means of payment From March 4, 2025 to April 25, 2025  
23 742981707PG0001 4202.12.90 Transport cases with exterior dimensions of 62.5 cm in length, 50 cm in width and 29.7 cm in height and interior dimensions of 55.9 cm in length, 43.2 cm in width and 25.4 cm in height, with lid depth of 51 mm, bottom depth of 203 mm and total depth of 254 mm From March 15, 2025 to September 1, 2025 Imported for sale to the Royal Military College of Canada
24 747542934 9506.91.00.90 Articles and equipment for general physical exercise From March 20, 2025 to March 28, 2025  
25 755380318RT0001 7210.49.00.70 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, in coils, of a thickness of at least 1.6 mm but not exceeding 4.2 mm, chemically treated, with a zinc coating    
7211.29.00 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, in coils, of a thickness of at least 1.6 mm but not exceeding 4.2 mm, chemically treated, with a zinc coating    
7211.90.00
  • (a) Flat-rolled products of carbon steel, of a width of less than 600 mm, in coils, coated or plated with aluminum, of a thickness of at least 1.6 mm but not exceeding 4.2 mm;
  • (b) Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, in coils, of a thickness of 1.6 mm to 4.2 mm, with a polymeric or plastic coating
    
26 780854485RM001 7228.60.00 Unthreaded rod bars of alloy steel, cold finished, ground or turned and polished, of grade 4140, of specification ASTMA108, of a length of at least 22 feet but not exceeding 40 feet, with an outer diameter of at least 1.125 inches but not exceeding 1.5 inches From March 13, 2025 to March 31, 2026  
7304.31.00 Cold drawn seamless tubes of non-alloy carbon steel, meeting ASTM 519, of an outer diameter of at least 1.625 inches but not exceeding 3.75 inches, of an inner diameter of at least 0.977 inch but not exceeding 2.73 inches, of a wall thickness of at least 0.180 inch but not exceeding 0.5 inch From March 13, 2025 to March 31, 2026  
7304.51.00 Cold-drawn seamless tubes of alloy steel, grades AISI 4130 or AISI 8630, meeting ASTM A519, of an outer diameter of at least 1.625 inches but not exceeding 3.75 inches, of an inner diameter of at least 0.977 inch but not exceeding 2.73 inches, of a wall thickness of at least 0.180 inch but not exceeding 0.5 inch From March 13, 2025 to March 31, 2026  
7326.90.10 Forged or extruded steel blanks for coupling, cold drawn seamless, of carbon or alloy steel, meeting ASTM A519, of an outsider diameter of at least 1.625 inches but not exceeding 3.75 inches, of inner diameters of at least 0.977 inches but not exceeding 2.73 inches, of a wall thickness of at least 0.180 inch but not exceeding 0.5 inch From March 13, 2025 to March 31, 2026  
27 791357346RT0001 9405.11.00 Chandeliers and other electric ceiling or wall lighting fittings, designed for use solely with light-emitting diode (LED) light sources From March 4, 2025 to April 5, 2025  
9405.19.00 Chandeliers and other electric ceiling or wall lighting fittings, other than those designed for use solely with light-emitting diode (LED) light sources From March 4, 2025 to April 5, 2025  
9405.21.00 Electric table, desk, bedside or floor-standing luminaires, designed for use solely with light-emitting diode (LED) light sources From March 4, 2025 to April 5, 2025  
9405.29.00 Electric table, desk, bedside or floor-standing luminaires, other than those designed for use solely with light-emitting diode (LED) light sources From March 4, 2025 to April 5, 2025  
9405.42 Other electric luminaires and lighting fittings, designed for use solely with light-emitting diode (LED) light sources From March 4, 2025 to April 5, 2025  
9405.49 Other electric luminaires and lighting fittings, other than those designed for use solely with light-emitting diode (LED) light sources From March 4, 2025 to April 5, 2025  
28 816010631RT0001 5703.29.90 Commercial-grade nylon carpet with custom-printed patterns that glow under UV lighting From March 27, 2025 to April 2, 2025. Imported for sale to company with business number 779233428
29 838782944 8419.81.00 Portable pizza oven, of a kind for use in a food truck From March 4, 2025 to April 25, 2025  
30 841564214RT0001 1003.90.91 Feed barley From March 4, 2025 to May 31, 2025  
31 849087549RM0001 7606.12.00 Aluminum alloy plates, sheets, and strip, rectangular (including square) of a thickness exceeding 0.2 mm    
32 855808044RM0001 7209.16.00.40 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, in coils, of a thickness of at least 1 mm but not exceeding 3 mm, of specification SDI From March 13, 2025 to December 31, 2025  
7225.50.00 Flat-rolled products of other alloy steel, of a width of 600 mm or more, cold-rolled, in coils, of carbon specification, dual phase uncoated From March 13, 2025 to December 31, 2025  
7606.12.00.20 Aluminum plates, sheets and strip, rectangular (including square) of aluminum alloys, in coils, clad, of a thickness exceeding 0.2 mm From March 13, 2025 to December 31, 2025  
33 856119151 7616.99.90 Aluminum composite material, with a thickness of 4 mm, comprised of two 0.5 mm thick sheets of aluminum that are bonded to a 3.0 mm thick thermal plastic core    
34 883281107RT0001 7226.92.00 Flat-rolled strip steel for automotive seat tracks, cold-rolled and annealed, of a width of less than 600 mm, 1.7 mm thick, not further worked From March 13, 2025 to December 31, 2025  
35 885957597RT0001 7308.30.00.29 Rolling steel door: McKeon model IS3020E-M-PC   Remission limited to one rolling steel door, imported for supply to building project at 400 Albert Street, Ottawa, Ontario
36 887258960 7304.39.00   From March 13, 2025 to January 1, 2026 Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan
7307.99.00   From March 13, 2025 to January 1, 2026 Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan
7308.10.00   From March 13, 2025 to January 1, 2026 Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan
7308.90.00.99   From March 13, 2025 to January 1, 2026 Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan
7309.00.00   From March 13, 2025 to January 1, 2026 Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan
7318.15.00   From March 13, 2025 to January 1, 2026 Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan
7326.19.90   From March 13, 2025 to January 1, 2026 Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan
7326.90.90   From March 13, 2025 to January 1, 2026 Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan
37 890975758RM001 7304.19.00 Hydraulic line, male-to-male JIC, rated for a nominal pressure of 3,000 psi, with a wall thickness of 0.120 inch, with an outer diameter of 1.25 inches, of a length of 48 inches, 72 inches, 96 inches, or 108 inches, with zinc-plated coating From March 13, 2025 to December 31, 2025  
7318.22.00 Washers, of a thickness of 1/4 inch, 1/2 inch, 1 inch, or 2 inches, suitable for shimming hydraulic cylinders From March 13, 2025 to December 31, 2025  
38 894634112 7307.29.99.00   From March 13, 2025 to January 1, 2026 Imported for sale to company with business number 887258960
7309.00.00   From March 13, 2025 to January 1, 2026 Imported for sale to company with business number 887258960
7322.90.10   From March 13, 2025 to January 1, 2026 Imported for sale to company with business number 887258960
39 898667639RM0001 7307.29.99.00 Stainless-steel push-to-connect quick-disconnect couplings with matching hose-support clamps, with 1/4 inch national pipe tapered (NPT), with nitrile seals    
7307.91.00.10 Hydraulic flange hose ends of carbon steel, of nominal diameter of at least 3/4 inch but not exceeding 2 inches, straight or 90 degrees, of SAE J518 Code 61 standard, with corrosion-resistant zinc-nickel finish    
7307.91.00.20 Hydraulic flange hose ends of carbon steel, of nominal diameter of at least 3/4 inch but not exceeding 2 inches, straight or 90 degrees, of SAE J518 Code 61 standard, with corrosion-resistant zinc-nickel finish    
7307.92.00.10 SAE 45 degree flare and flareless adapters for refrigeration and instrumentation applications, in brass or zinc-plated steel, with an outer diameter of at least 6 mm but not exceeding 12 mm    
7307.92.00.20 Permanent-crimp hose ends for braided hose, made of carbon steel with zinc-nickel plating, of nominal diameter of at least 1/4 inch but not exceeding 2 inches    
7307.99.00.11 Air-brake hose with brass sockets and nipples, U.S.DOT (FMVSS 106) and Canadian CMVSS standard, of hose sizes of at least 1/4 inch but not exceeding 2 inches internal diameter    
7307.99.00.19 Crimpless refrigerant fittings with bite-type sleeve, assembly, available in carbon-steel or brass, equipped with hydrogenated nitrile butadiene rubber (HNBR) O-rings, for hoses of a nominal diameter of at least 1/4 inch but not exceeding 2 inches    
7307.99.00.21 Crimpless repair splices and female ORFS (o-ring face seal) terminations of carbon steel, with elastomeric seals    
7307.99.00.29 Permanent-crimp hose ends for braided and spiral hose, of carbon steel with zinc-nickel or stainless steel, for hoses of a nominal diameter of at least 1/8 inch but not exceeding 2 inches    
7318.16.00.90 Carbon steel flare nut, used in hydraulic fitting assemblies and general-purpose applications    
7320.20.00.90 Helical spring guards of carbon-steel, with inner diameter of at least 7.9 mm but not exceeding 19 mm, of a length of 3.05 meters or 6.10 meters, with a finish of black oxide or bright zinc coating    
7326.90.10 Non-standard spiral-hose crimp fittings with profiles of carbon steel, with zinc-nickel coating, of size of at least 1/4 inch but not exceeding 2 inches    
7326.90.90.90 Residual steel components: crimp ends, clamp halves, bite-to-wire adapters and sleeves    
7609.00.00 37 degree flare adapters (male, female, union, bulkhead) and reusable sleeves for nylon air-brake tubing, of 6061-T6 aluminium, for hoses of nominal diameter of at least 3/16 inch but not exceeding 1 inch, with blue anodised finish    
7616.99.90.90 Reusable swivel ends for use with hoses, of 6061-T6 aluminium, with black/clear anodised, straight finish    

REGULATORY IMPACT ANALYSIS STATEMENT

(This statement is not part of the Order.)

Issues

The Government of Canada has imposed tariffs on certain U.S.-made goods and Chinese-made goods. The Government indicated it would consider remission requests related to these surtaxes.

Background

U.S. surtax and remission

On March 4, 2025, the United States imposed tariffs of 25% on U.S. imports from Canada, with energy products subject to a 10% tariff (since amended to include potash), under the International Emergency Economic Powers Act (IEEPA), further to alleged concerns about border security and the flow of fentanyl. On March 7, the United States provided an exemption under the IEEPA tariffs for imports from Canada that qualify for preferential treatment under the Canada-United States-Mexico Agreement (CUSMA) [i.e. are “CUSMA-compliant”]. On March 12, 2025, the United States imposed further tariffs of 25% on certain Canadian steel and aluminum products. On April 3, 2025, the United States imposed global tariffs of 25% on imports of passenger vehicles and light trucks. In the case of Canada (and Mexico), these auto tariffs apply in full to non-CUSMA originating vehicles, but apply only to the non-U.S. content of CUSMA originating vehicles.

Canada has responded to these tariffs by introducing a suite of countermeasures. On March 4, 2025, the Government of Canada imposed 25% tariffs on $30 billion in goods imported from the United States. On March 13, 2025, the Government of Canada imposed 25% tariffs on an additional $29.8 billion in steel, aluminum, and other products imported from the United States in response to U.S. tariffs against Canadian steel and aluminum products. In addition, on April 9, the Government of Canada imposed 25% tariffs on non-CUSMA compliant U.S.-made light vehicles, and on the non-Canadian and non-Mexican content of CUSMA compliant U.S.-made light vehicles.

These surtaxes are implemented through three separate regulations: the United States Surtax Order (2025-1), the United States Surtax Order (Steel and Aluminum 2025), and the United States Surtax Order (Motor Vehicles 2025), made pursuant to section 53 of the Customs Tariff.

Public consultations held in the context of these surtaxes confirmed stakeholder support for these countermeasures as a necessary response to U.S. tariffs. However, some stakeholders noted concerns with their ability to shift supply chains due to factors such as no or limited alternative sources of supply (short supply), or the requirement for certain products to comply with certification requirements, product specifications or contractual requirements, requiring Canadian businesses to purchase U.S. products.

On March 4, 2025, the Government announced a framework and process for how it will consider remission requests for the tariffs on products from the United States. Under specific circumstances, remission allows for relief from the payment of surtaxes, or the refund of surtaxes already paid. Remission represents an exception to the rules by providing for relief of otherwise applicable duties. Therefore, the Government only considers remission where it is required to address exceptional and compelling circumstances that, from a public policy perspective, are found to outweigh the primary rationale behind the application of the tariffs.

On April 16, 2025, Canada implemented the United States Surtax Remission Order (2025), which provides temporary, horizontal relief for any goods imported by or on behalf of public health, public safety, or national-security entities, as well as certain goods deemed necessary for public health and health care. It also provides relief for any goods used as inputs in Canadian manufacturing, processing, or food and beverage packaging. Remission under this Order is currently set to expire on October 15, 2025. The Order was amended on June 26 to provide additional relief from tariffs for certain goods found to be in short supply and for companies facing exceptional circumstances.

On August 22, 2025, Canada announced that it would remove its counter-tariffs on U.S. goods, with the exception of those on steel, aluminum and autos, as of September 1, 2025. Further to this announcement, counter-tariffs put in place in March 2025 were removed for most U.S. imports, via the Order Amending and Repealing Certain Orders Made Under the Customs Tariff (United States Surtax).

China surtax and remission

The Government of Canada imposed a 100% surtax on Chinese-made electric vehicles on October 1, 2024, and a 25% surtax on Chinese-made steel and aluminum products on October 22, 2024. These measures, implemented through the China Surtax Order (2024), were introduced in response to concerns about unfair trade practices and to support domestic industries.

On October 18, 2024, the Government outlined a framework and process for considering remission requests related to these surtaxes on Chinese-made goods. Following an initial assessment of remission requests, the China Surtax Remission Order (2024) entered into force on January 31, 2025, providing relief from surtaxes on imports of certain steel, aluminum, and electric vehicles in cases of short supply, contractual obligations, or other exceptional circumstances. Following the assessment of additional remission requests, the Order Amending the China Surtax Remission Order (2024) and the Order Amending the China Surtax Remission Order (2024) and the United States Surtax Remission Order (2025) entered into force on March 23, 2025, and June 26, 2025, respectively, expanding the scope of steel and aluminum goods eligible for remission to further address the challenges faced by Canadian businesses.

Objective

The objective of the Order Amending the China Surtax Remission Order (2024) and the United States Surtax Remission Order (2025) (2025-1) is to

Description

Pursuant to section 115 of the Customs Tariff, this Order remits surtaxes paid or payable on imports of certain goods from the United States and China.

United States Surtax Remission Order (2025)

The United States Surtax Remission Order (2025) is amended to extend remission to goods classified under an expanded set of tariff items listed in Schedules 1 through 4 of the Order:

The United States Surtax Remission Order (2025) is also amended to modify the eligibility and scope of remission under sections 1 through 3 of the Order:

China Surtax Remission Order (2024)

The China Surtax Remission Order (2024) is amended to extend remission to goods classified under an expanded set of tariff items listed in Schedules 1 and 2 of the Order:

Regulatory development

Consultation

On March 4, 2025, Canada announced a public comment period with respect to the potential application of tariffs on a wide range of imports from the United States, including auto imports. From March 4 to April 2, 2025, Canada’s public comment period resulted in extensive stakeholder input and feedback, with nearly 7 000 written submissions.

Canadian businesses, stakeholders, and partners generally confirmed their support for Canada’s surtaxes on certain U.S. goods. However, some stakeholders noted concerns about their ability to shift supply chains away from the United States due to limited alternative sources of supply (short supply), or the requirement for certain inputs to comply with certification requirements, product specifications or contractual obligations.

On March 4, 2025, the Government of Canada also published on the Department of Finance’s website a notice explaining the remissions framework and process under which remission could be provided for surtaxes imposed on imports from the United States. Since that time, the Department has received a very high volume of requests from businesses seeking relief from the surtaxes on U.S. imports.

The Government previously held public consultations between July 2 and August 1, 2024, on potential policy responses to unfair Chinese trade practices in electric vehicles, including on the imposition of surtaxes on Chinese electric vehicles pursuant to section 53 of the Customs Tariff. In addition, a comment period was held between August 26 and September 20, 2024, following the issuance of a Notice of Intent to apply a surtax on Chinese-made steel and aluminum products. As with U.S. surtaxes, a framework and process under which remission could be provided was published on the Department of Finance’s website.

Further, Canadian producers were consulted on supply conditions in Canada in respect of the goods claimed to be in short supply by the remission requestors. Their views informed the short supply determinations made with respect to the remission of surtaxes for goods in Schedule 2 and Schedule 3 of the United States Surtax Remission Order (2025) and Schedule 1 of the China Surtax Remission Order (2024).

Indigenous engagement, consultation and modern treaty obligations

Following an assessment of modern treaty implications, no adverse impacts on potential or established Indigenous or treaty rights, which are recognized and affirmed in section 35 of the Constitution Act, 1982, were identified in the Order.

Instrument choice

Section 115 of the Customs Tariff provides the authority for the Governor in Council to remit surtaxes on the recommendation of the Minister of Finance.

Regulatory analysis

Benefits and costs

This Order is a relieving mechanism for the benefit of industry impacted by the U.S. and China surtaxes. The administrative costs for Canadian businesses to claim remission of the surtaxes are expected to be limited.

In accordance with the criteria that have been set out, remission is only provided where warranted due to conditions of short supply, pre-existing contractual obligations, and exceptional circumstances requiring lead time for Canadian businesses to adjust their supply chains to the surtaxes. Items listed in Schedules 2 and 3 of the United States Surtax Remission Order (2025) and Schedule 1 of the China Surtax Remission Order (2024) are goods that are used as inputs for further manufacturing and processing in Canada and are not reasonably available from any other alternative sources globally. In the absence of remission, Canadian businesses that use these goods would have to pay for the surtax, which would increase production costs. Depending on the product, these costs could ultimately be passed on to Canadian consumers or downstream producers. These Schedules mitigate this issue by providing remission for such goods, regardless of the importer or the company using them.

Goods listed in Schedule 4 of the United States Surtax Remission Order (2025) and Schedule 2 of the China Surtax Remission Order (2024) have been identified as items for which company-specific relief is warranted, for example, where a contract is in place requiring Canadian businesses to purchase U.S. inputs, or companies are facing exceptional circumstances, and more time is required to switch suppliers to avoid significant adverse impacts on the Canadian economy. In these cases, remission allows additional time for companies to fulfill original contracts or switch suppliers without being unduly burdened by surtaxes.

The extension to the duration of remission provided under the horizontal elements of the United States Surtax Remission Order (2025) will provide continued surtax relief for stakeholders in the public health, public safety, and national security sectors, as well as in the manufacturing, processing, food and beverage, and agricultural sectors. This will ensure that immediate surtax relief continues to flow to Canadian businesses that rely on U.S. imports to support their operations in Canada, while the Government continues to process company-specific requests for remission under the framework. The expansion of the scope of section 3 to cover agricultural inputs will provide additional certainty to agricultural producers and processors regarding their eligibility for this relief.

For importations made after the date of entry into force of this Amending Order, remission claims can be made for each applicable importation as part of the process of filling existing customs documentation requirements. The importer will be required to include one extra code in their usual import document. As in all cases, the importer must maintain records supporting their importation (e.g. related to tariff classification, entitlement to a tariff preference, or entitlement to the remission). There would be minimal incremental costs for the Government to process the claims.

Importers requesting a refund for goods imported prior to the entry into force of this Amending Order will submit forms to the Canada Border Services Agency (CBSA), accompanied by supporting documentation, establishing that the imported goods qualify for remission. There would be minimal incremental costs for the industry to supply the documentation and for the Government to process the claims.

Small business lens

Analysis under the small business lens concluded that the Order Amending the China Surtax Remission Order (2024) and the United States Surtax Remission Order (2025) (2025-1) will impact small businesses. Some of the importers meet the definition of “small business” in the Policy on Limiting Regulatory Burden on Business, and the process to claim remission of duties paid meets the definition of “administrative burden” set out in the Policy. No additional flexibility is necessary for small businesses claiming remission, as all eligible importers already possess the original customs forms required to justify remission and will benefit from the remitted funds.

One-for-one rule

This Order relates to tax administration and is exempt from the requirement to offset administrative burden and regulatory titles under the one-for-one rule. The requirement for Canadian importers to submit claims for remission meets the Red Tape Reduction Act definition of administrative burden on businesses. However, duties are considered to be “taxes” for the purpose of the one-for-one rule and have been exempted from the offset requirement.

Regulatory cooperation and alignment

The amending Order is not related to a work plan or commitment under a formal regulatory cooperation forum.

Effects on the environment 

In accordance with the Cabinet Directive on Strategic Environmental and Economic Assessment, a preliminary scan concluded that this Order would not result in positive or negative environmental effects. Therefore, a strategic environmental and economic assessment is not required.

Gender-based analysis plus

No impacts based on gender and other identity factors have been identified for this Order.

Implementation, compliance and enforcement, and service standards

The CBSA will assess any claims for remission made pursuant to this Order and will ensure compliance with their terms and conditions in the normal course of its administration of customs and tariff-related legislation and regulations. In doing so, the existing administrative framework will be leveraged to ensure that costs can be managed within existing resources. Any refund issued pursuant to the amending Order will be administered by the CBSA. Depending on the volumes and complexity of refund submissions, the CBSA strives to achieve a 90-day processing standard.

Contact

Laura Bourns
Director
Domestic Tariff Policy
International Trade Policy Division
Department of Finance Canada
Ottawa, Ontario
K1A 0G5
Email: laura.bourns@fin.gc.ca