Order Amending the United States Surtax Remission Order, No. 2019-2: SOR/2019-262

Canada Gazette, Part II, Volume 153, Number 14

Registration

SOR/2019-262 June 25, 2019

CUSTOMS TARIFF

P.C. 2019-952 June 22, 2019

Her Excellency the Governor General in Council, on the recommendation of the Minister of Finance, pursuant to section 115 ^{footnote a} of the Customs Tariff ^{footnote b}, makes the annexed Order Amending the United States Surtax Remission Order, No. 2019-2.

Order Amending the United States Surtax Remission Order, No. 2019-2

Amendments

1 Paragraph 1(2)(b) of the United States Surtax Remission Order^{footnote 1} is replaced by the following:

(b) in the case of a good referred to in Schedule 2, it is imported into Canada during the period beginning on July 1, 2018 and ending on May 20, 2019;

2 Items 14 to 17 of Schedule 1 to the Order are replaced by the following:

Item	Column 1 Description of Goods
14	Flat-rolled product or flat bar, of iron or non-alloy steel, not in coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.25 inch, of a width of more than 8 inches to 12 inches inclusive
15	Flat-rolled product or flat bar, of iron or non-alloy steel, not in coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.375 inch, of a width of more than 10 inches to 12 inches inclusive
16	Flat-rolled product or flat bar, of iron or non-alloy steel, not in coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.5 inch, of a width of more than 10 inches to 12 inches inclusive
17	Flat-rolled product or flat bar, of iron or non-alloy steel, not in coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.625 inch, of a width of more than 10 inches to 12 inches inclusive

3 Items 25 and 26 of Schedule 1 to the Order are replaced by the following:

Item	Column 1 Description of Goods
25	Bar and rod, annealed, of grade 4140, of a diameter of less than 4 inches or of more than 7 inches to 12 inches inclusive
26	Bar and rod, of grade 8620, of a diameter of more than 7 inches to 12 inches inclusive

4 Item 28 of Schedule 1 to the Order is replaced by the following:

Item	Column 1 Description of Goods
28	Bar and rod, of iron or non-alloy steel, of grade AISI 1018 (ASTM A108), of a diameter of more than 7 inches to 12 inches inclusive

5 Item 31 of Schedule 1 to the Order is replaced by the following:

Item	Column 1 Description of Goods
31	Bar and rod, of iron or non-alloy steel, chrome plated, of a minimum yield strength of up to 120,000 psi inclusive

6 Items 34 and 35 of Schedule 1 to the Order are replaced by the following:

Item	Column 1 Description of Goods
34	Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of grade A286, 13-8, 15-5, 15-5 PH, 17-4, 17-4 PH, 201, 303, 303Se, 304, 304L, 316, 316L, 321, 327, 347, 409, 410, 420, 430, 450, AMS Custom 465 or 2304
35	Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grade 13-8, 15-5, 15-5 PH, 17-4, 201, 303, 304, 304L, 316, 316L, 321, 327, 409, 410, 420, 430, 450 or 465

7 Items 40 and 41 of Schedule 1 to the Order are replaced by the following:

Item	Column 1 Description of Goods
40	Wire of stainless steel, nickel coated, of type 302 (ASTM A313 specification), of a diameter of up to 5.25 mm
41	Wire of stainless steel, nickel coated, of type 17-7PH (ASTM A313 specification), of a diameter of up to 5.25 mm

8 Items 47 to 49 of Schedule 1 to the Order are replaced by the following:

Item	Column 1 Description of Goods
47	Bar and rod, of proprietary grade Finkl Steel FX-Xtra, of a diameter of up to 16 inches
48	Bar and rod, of proprietary grade Finkl Steel MLQ (mold lens quality) P20
49	Bar and rod, of proprietary grade Finkl Steel MD or MDI (mold quality steel) P20

9 Item 52 of Schedule 1 to the Order is replaced by the following:

Item	Column 1 Description of Goods
52	Bar and rod, not further worked than cold-formed or cold-finished, of grade 5140H

10 Item 83 of Schedule 1 to the Order is replaced by the following:

Item	Column 1 Description of Goods
83	Aluminum cans of a size from 89 ml to 1000 ml

11 Item 104 of Schedule 1 to the Order is replaced by the following:

Item	Column 1 Description of Goods
104	Flat-rolled product, in coils, not further worked than cold-rolled, of grade 1074, of a thickness from 0.032 inch to 0.165 inch inclusive, of a width from 24.98 inches to 48 inches inclusive

12 Item 115 of Schedule 1 to the Order is replaced by the following:

Item	Column 1 Description of Goods
115	Flat-rolled product, not further worked than cold-rolled, of grade 1074, of a width from 1.575 inches to 9.5 inches inclusive

13 Items 120 and 121 of Schedule 1 to the Order are replaced by the following:

Item	Column 1 Description of Goods
120	Bar and rod, not further worked than hot-rolled, of grade 4140, of a diameter from 7 inches to 12 inches inclusive, of a minimum yield strength of up to 70,000 psi
121	Bar and rod, of grade 60, of specification ASTM A615 or AASHTO M31, epoxy coated, of a diameter from 0.5 inch to 2 inches inclusive

14 Item 138 of Schedule 1 to the Order is replaced by the following:

Item	Column 1 Description of Goods
138	Flat-rolled product, rough machined and rotary ground, of grade O-1, A2, D2, S7, H13 or M2, of a thickness from 0.25 inch to 12 inches, of a width greater than 600 mm

15 Item 144 of Schedule 1 to the Order is replaced by the following:

Item	Column 1 Description of Goods
144	High speed steel round bars, turned, peeled or centerless ground, surface finish, of grade M2, M4, M7, T15, M42, Rex 20, Rex 45 or Rex 76, of a diameter of 0.125 inch to 24 inches inclusive

16 Item 146 of Schedule 1 to the Order is replaced by the following:

Item	Column 1 Description of Goods
146	Alloy or tool steel round bars, rough turned, peeled or centerless ground, surface finish, of grade O-1, O6, A2, D2, S7, LescoWear, 1V, 3V, 4V, 9V, 10V or 15V, of a diameter of 0.125 inch to 24 inches inclusive

17 Item 150 of Schedule 1 to the Order is replaced by the following:

Item	Column 1 Description of Goods
150	Tube, seamless, of stainless steel, of grade 304, 316, 317 or 347

18 Items 155 and 156 of Schedule 1 to the Order are replaced by the following:

Item	Column 1 Description of Goods
155	Hydraulic tube, of grade J525 1008 or 1010, specification of ASTM SA/214, of an outside diameter from 0.125 inch to 1.5 inches inclusive, of a minimum yield strength of 25,000 psi
156	Tube, welded, of stainless steel, of a circular cross-section, of an outside diameter of up to 4.5 inches inclusive

19 Item 158 of Schedule 1 to the Order is replaced by the following:

Item	Column 1 Description of Goods
158	Tube, welded, of stainless steel, of square or rectangular cross-section, of specification ASTM A240

20 Item 160 of Schedule 1 to the Order is replaced by the following:

Item	Column 1 Description of Goods
160	Geodesic dome for storage tanks, of aluminum, of a diameter from 20 feet to 125 feet

21 Schedule 1 to the Order is amended by adding the following after item 168:

Item	Column 1 Description of Goods
169	Flat-rolled product, rough machined and rotary ground, of grade 4140 or 4142, of a thickness from 0.25 inch to less than 5 inches, of a width greater than 600 mm
170	Alloy or tool steel round bars, rough turned, peeled or centerless ground, surface finish, of grade 4140 HT, P20, L6, or H13, of a diameter of 0.125 inch to 12 inches inclusive
171	Hot-rolled annealed plate, of grade 4140, of a thickness from 0.25 inch to 12 inches, of a width of more than 24 inches
172	Alloy steel plate, not in coils, not further worked than hot-rolled, of a thickness of 0.25 inch or more, of a width of 23.62 inches or more, of grade 4140 or 4142
173	Flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled, with patterns in relief, of specification ASTM A786, of a thickness of 0.075 inch, of a width of 60 inches
174	Flat-rolled product, of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, in coils, of specification UMG 1035 spheroidized and annealed, of a width of 600 mm or more, of a thickness from 0.0984 inch to 0.126 inch inclusive
175	Flat-rolled product, of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, in coils, of specification UMG 1050 spheroidized and annealed, of a width of 600 mm or more, of a thickness from 0.0984 inch to 0.122 inch inclusive
176	Flat-rolled product of iron or non-alloy steel, hot-rolled, pickled and oiled, in coils, of grade 60 class 2B, of specification ASTM A1011, of a thickness from 0.063 inch to less than 0.066 inch, of a width of up to 46.975 inches
177	Flat-rolled product of iron or non-alloy steel, hot-rolled, pickled and oiled, in coils, of specification SAE J2340 340XF, of a thickness from 0.056 inch to less than 0.058 inch, of a width of up to 55.51 inches
178	Flat-rolled product of iron or non-alloy steel, hot-rolled, pickled and oiled, in coils, of specification SAE J2340 380XF, of a thickness from 0.055 inch to 0.063 inch inclusive, of a width of up to 57.3 inches
179	Flat-rolled product, of iron or non-alloy steel, hot-rolled, picked and oiled, in coils, of specification SAE J1392 050XF, of a width of 600 mm or more, of a thickness of 0.0551 inch to 0.063 inch inclusive
180	High carbon flat-rolled product, hot-rolled, pickled and oiled, of grade 1050, of a width of less than 600 mm, of a thickness from 0.056 inch to 0.26 inch inclusive
181	Flat-rolled product, of grade 1055/1065, hot-rolled, aluminum killed, one pass (cold-rolled) annealed, of a thickness of 0.22 inch to 0.307 inch (+/- 0.012 inch) inclusive, of a width of 5 inches to 6 inches (+/- 0.02 inch) inclusive
182	Flat-rolled product, of iron or non-alloy steel, hot-rolled, in coils, of specification UMG 1050 spheroidized and annealed, of a width from 12.85 inches to 23.6 inches, of a thickness from 0.0984 inch to 0.122 inch inclusive
183	Flat-rolled product of other alloy steel, not further worked than hot-rolled, not in coils, of grade CMS-18 or grade CMS-19
184	Flat-rolled product, of grade 4142, of a width from 926 mm to 971 mm inclusive
185	Flat-rolled product of high speed steel, of a width of less than 600 mm, of proprietary grade Micro-Melt Maxamet, of a thickness from 0.25 inch to 0.458 inch inclusive
186	Flat-rolled product, of grade 4130, hot-rolled, annealed, of a thickness from 0.157 inch to 0.276 inch (+/- 0.007 inch) inclusive, of a width of 2.972 inches to 7.886 inches (+/- 0.02 inch) inclusive
187	Flat-rolled product, of grade 8620, hot-rolled, annealed, of a thickness of 0.348 inch (+/- 0.01 inch), of a width of 5.788 inches (+/- 0.02 inch)
188	Flat-rolled product of other alloy steel, of a width of less than 600 mm, not further worked than hot-rolled, of proprietary grade NiMark 300 Hi temperature alloy, of a thickness from 0.25 inch to 0.458 inch inclusive
189	Flat-rolled product of other alloy steel, not further worked than hot-rolled, not in coils, of proprietary grade Carpenter CTS XHP, of a thickness from 0.108 inch to 0.32 inch inclusive, of a width of 4 inches to 20 inches inclusive
190	Flat-rolled product, dual phased steel, in coils, of specification GMW3399M-ST-S-CR590T/340Y-DP-UNCOATED-U, of a width from 1,361 mm to 1,500 mm inclusive, of a thickness of 1.1 mm or 1.2 mm
191	Flat-rolled product, in coils, cold-rolled, of specification GMW3032M-ST-S-CR420LA, of a thickness of 1.2 mm (+/- 0.06 mm), of a width of 645.414 mm
192	Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of specification SAE J2340 420XF, of a thickness from 0.052 inch to 0.058 inch inclusive, of a width of up to 50.625 inches
193	Flat-rolled products of iron or non-alloy steel, in coils, cold-rolled, of specification HSLA SAE J2340 420XF, of a thickness from 0.057 inch to 0.061 inch inclusive, of a width of up to 53.525 inches
194	Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 060 class 2, of specification ASTM A1011, of a thickness from 0.055 inch to 0.063 inch inclusive, of a width of up to 50.775 inches
195	Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 060 class 2, of specification ASTM A1011, of a thickness from 0.0295 inch to 0.035 inch inclusive, of a width of up to 56.475 inches
196	Flat-rolled product, in coils, cold-rolled, of specification GMW3399M-ST-S-CR780T/420Y-DP-UNCOATED-U, of a width of 622.30 mm, of a thickness of 1.2 mm (+/- 0.06 mm)
197	Flat rolled product of iron or non-alloy steel, of grade C1022, C1045, C1055, C1060, C1067, C1070, C1074 or C1095, annealed, of specification ASTM A682 or A684, of a thickness of more than 0.0098 inch, of a width of less than 23.625 inches, not clad, plated or coated, not further worked than cold-rolled (cold-reduced)
198	High carbon flat-rolled product, of grade 1095, of a width of less than 600 mm, of a thickness from 0.0098 inch to 0.255 inch inclusive, not further worked than cold-rolled
199	Flat-rolled product, of grade 1020, cold-rolled, annealed, of a thickness of 0.1595 inch (+/- 0.0015 inch), of a width from 7.663 inches to 8.926 inches (+/- 0.02 inch) inclusive
200	Flat-rolled product, of grade 1050, cold-rolled, annealed, of a thickness of 0.157 inch (+/- 0.003 inch), of a width of 4.925 inches (+/- 0.02 inch)
201	Flat-rolled product, of grade 1018 AK (aluminum killed), cold-rolled, annealed, of a thickness of 0.048 inch to 0.2155 inch (+/- 0.002 inch) inclusive, of a width from 2 inches to 9.32 inches (+/- 0.02 inch) inclusive
202	Flat-rolled product, of grade 1018 SK (silicon killed), cold-rolled, annealed, of a thickness of 0.079 inch to 0.174 inch (+/- 0.002 inch) inclusive, of a width of 1.53 inches to 5.8 inches (+/- 0.01 inch) inclusive
203	Flat-rolled product, of grade 1020 AK (aluminum killed), cold-rolled, annealed, of a thickness of 0.222 inch (+/- 0.002 inch), of a width of 3.4 inches (+/- 0.01 inch)
204	Flat-rolled product, of grade 10B21, cold-rolled, annealed, of a thickness of 0.104 inch to 0.196 inch (+/- 0.006 inch) inclusive, of a width of 1.938 inches to 5.976 inches (+/- 0.02 inch) inclusive
205	Flat-rolled product of other alloy steel, cold-rolled, of specification high strength-SAE J2340, of grade 380XF CR, of a width of 600 mm or more, of a thickness from 0.045 inch to 0.049 inch inclusive
206	Flat-rolled product, in coils, of specification 4142 HR, of a width from 36.481 inches to 38.211 inches inclusive, of a thickness from 0.1795 inch to 0.2415 inch inclusive
207	Flat-rolled product of other alloy steel, of a width of less than 600 mm, not further worked than cold-rolled (cold-reduced), of proprietary grade Hiperco 50 Alloy, of a thickness from 0.001 inch to 0.385 inch inclusive
208	Flat-rolled product, of grade 4130, cold-rolled, annealed, of a thickness of 0.069 inch to 0.236 inch (+/- 0.006 inch) inclusive, of a width of 1.4 inches to 11.108 inches (+/- 0.02 inch) inclusive
209	Flat-rolled product, of grade 4140, cold-rolled, annealed, of a thickness of 0.118 inch to 0.236 inch (+/- 0.002 inch), of a width of 3.22 inches to 5.551 inches (+/- 0.02 inch)
210	Flat-rolled product, of grade 8620 or 8620 H, cold-rolled, annealed, of a thickness of 0.093 inch to 0.348 inch (+/- 0.002 inch) inclusive, of a width of 2.808 inches to 7.360 inches (+/- 0.02 inch) inclusive
211	Flat-rolled product, cold-rolled, in coils, of specification TSG3100G SPC980DU-T, of a thickness from 0.037 inch to 0.041 inch inclusive, of a width of up to 52.285 inches
212	Flat-rolled product, of grade 8620, hot-rolled and one pass (cold-rolled), annealed, of a thickness of 0.315 inch (+/- 0.004 inch), of a width of 5.35 inches (+/- 0.02 inch)
213	Flat-rolled product, of zinc-aluminum-magnesium alloy, of registered trademark ZAM, in coils, of specification ASTM-A1046/A1046M, MSM-CC-DZC 90 or MSM-CE-DZC 120, of a thickness of 0.02 inch to 0.2 inch inclusive, of a width of 32 inches or more
214	Flat-rolled product of iron or non-alloy steel, galvanized, of specification ASTM A653 SS, of grade 080 G90, of a thickness from 0.044 inch to 0.061 inch inclusive, of a width from 50.655 inches to 55.655 inches inclusive
215	Flat-rolled product, with polymer coating, of a thickness not exceeding 2.8 mm, of a width not exceeding 863 mm, meeting standard ASTM A929 or CSA G401
216	Bar and rod, of ductile cast iron of grade 80-55-06
217	Bar and rod, of gray iron or ductile iron continuous cast, of grade 100-760-02, G-2 (class 40 gray iron) or 201-NI-RESIS
218	Bar and rod, in coils, not further worked than cold-formed or cold-finished, of grade AISI 1010, 1015, 1018, 1020 or 1022, of a diameter from 1.25 inches to 1.47 inches inclusive
219	Bar and rod, in coils, not further worked than cold-formed or cold-finished, of grade AISI 1045, 10B21 or 8620, of a diameter of more than 1 inch to 1.47 inches inclusive
220	Bar and rod, not further worked than cold-formed or cold-finished, of grade 1045 or 1050, of a minimum yield strength of 100,000 psi, of specification ASTM A-311, of a diameter from more than 3 inches to 12 inches inclusive
221	Bar and rod, hot-rolled, in irregularly wound coils, of silico-manganese steel, of grade 300M, of diameter of more than 0.765 inch to 12 inches inclusive
222	Bar and rod, of silico-manganese steel, of grade 300M-HS, of a diameter from more than 4.062 inches to 12 inches inclusive
223	Bar and rod, of grade 4330, 4330M or 4330NiMo5VCa4, of minimum yield strength of up to 165,000 psi inclusive, of a diameter from more than 4.062 inches to 12 inches inclusive
224	Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4330V MOD, of an outside diameter of 4.75 inches
225	Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4145H MOD, of an outside diameter of 5 inches, 8 inches or 8.75 inches
226	Round bar of alloy steel, of AISI grade E8720Ca4 or E9313-15MCa4, calcium treated, electric furnace forged, vacuum degassed, not further worked than hot-rolled, hot-drawn or extruded, of specifications ASTM A255, ASTM E45 or European Standard EN 10204
227	Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade M-50 or 4330V, of a diameter from 0.5 inch to 12 inches inclusive
228	Bar, of grade SAE 4340, of specification AMS 6414, of a diameter of up to 12 inches inclusive, vacuum remelted, of a kind used in aerospace application
229	Bar, of grade SAE 52100, vacuum remelted, of specification AMS 6440 or AMS 6444, of a kind used in aerospace application
230	Bar, of grade AISI 440C, of specification AMS 5618, electrode vacuum remelted, of a kind used in aerospace application
231	Bar, of grade M50, of specification AMS 6491, vacuum melted and remelted, of a kind used in aerospace application
232	Bar, of grade M50Nil, of specification AMS 6278, vacuum melted and remelted, of a kind used in aerospace application
233	Bar and rod, of other alloy or non-alloy steel, not further worked than cold-formed or cold-finished, of proprietary grade Premomax or Biodur Carpenter CCM alloy, of a diameter from 1 inch to 12 inches inclusive
234	Bar, turned, ground and/or polished, not further worked than cold-formed, cold-drawn or cold-finished, of grade 4140 or 8620, of a diameter from 1.25 inches to 1.5 inches inclusive, of a length of more than 24 feet to 40.2 feet inclusive
235	Tubes, pipes and hollow profiles, seamless, of stainless steel, of circular cross-section, of grades 15-15LC Mod hollow bar or 15-15HS max hollow bar, of an inside diameter from 2 inches to 10 inches inclusive
236	Pipe and tube, seamless, of grade 4130, 4130M, 4140, 4140Ca4 or 4145, of an outside diameter of up to 3 inches inclusive, of a wall thickness of up to 0.5 inch inclusive
237	Electric fusion welded carbon pipe, of specification ASTM A672, of grade C70, of outside diameter of 28 inches, of an inside diameter of 26.5 inches, of a wall thickness of 0.75 inch
238	Line pipe of a kind used for oil or gas pipeline, drawn over mandrel (DOM), of grade 1026, of an outside diameter of 3 inches, of an inside diameter of 1.75 inches or 2.375 inches
239	Line pipe of a kind used for oil or gas pipeline, of grade 1026, of an outside diameter of 3.63 inches, of an inside diameter of 3 inches
240	Tube, welded, of grade AISI 1026, of an outside diameter of 1.9 inches, of a wall thickness of 0.4 inch
241	Tube, welded, of grade AISI 1526, of an outside diameter from 1.05 inches to 1.9 inches inclusive, of a wall thickness from 0.225 inch to 0.34 inch
242	Tube, welded, of grade AISI 4140, of an outside diameter of 1.778 or 1.784 inches, of an inside diameter of 1.322 inches or 1.328 inches
243	Tube, percussion welded (PEW), of specification SAE J526 1005-1010, of an outside diameter of 0.312 inch, of a wall thickness of 0.03 inch
244	Tube, percussion welded (PEW), of specification SAE J526 1005-1010, of an outside diameter of 0.25 inch, of a wall thickness of 0.035 inch
245	Pipe and tube, of stainless steel, of an outside diameter of 2 inches, of a wall thickness of 1.5 mm, of specification ASTM A554
246	Tubes and pipes, welded, of circular cross-section, of grade 15B27MC, 15B27M, 15B27, 15B30M or 15B34, of a wall thickness from 3 mm to 6 mm inclusive, of a diameter from 20 mm to 40 mm inclusive
247	Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 1.97 inches by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513
248	Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 2.36 inches by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513
249	Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 4.72 inches by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513
250	Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 4.72 inches by 2.36 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513
251	Carbon steel welding wire, of trademark NS-115 CopperFree, of a diameter of 0.035 inch to 0.062 inch inclusive, of specification CSA W48-14 B-G49A 3 C1 S6
252	Wire, of mild steel, not clad, of a diameter of 1 mm, of specification AWS A5.18/A5.18M or CSA W48.14
253	Oil tempered Class 2 spring wire, of a diameter of more than 0.531 inch
254	Rub rail of alloy steel, hot-rolled, of grade A529-50, of a height of 2.5 inches, of a width of 0.375 inch, of a length of 24 feet
255	Hot-rolled structural steel coil, of grade 36 Type 1, of specification ASTM A1011, of a nominal thickness of 0.059 inch, of a width of 59.5 inches
256	High Carbon steel flat bar, cold-rolled, annealed, of grade 4340, of a thickness of 0.282 inches, of a width of 1 inch
257	Hot-rolled round bar, of alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 5160 or 5160H, of a diameter of 0.562 inch to 0.748 inch inclusive
258	Hot-rolled flat bar, of alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 5160 or 5160H, of a thickness from 0.187 inch to 0.236 inch, of a width from 0.499 inch to 1.250 inches inclusive
259	Bar of other alloy steel, of specification AMS 5743J or AM-355, water quenched heat treat process, of a diameter of 5.125 inches, with a maximum cobalt content of 0.4% by weight
260	Bar, hot-rolled, of grade 5160H, of a diameter of 0.5625 inch, 0.59375 inch, 0.625 inch, 0.65625 inch, 0.6875 inch or 0.71875 inch
261	Bar, hot-rolled, turned and polished, of grade 5160H, of a diameter of 0.875 inch
262	Bar, hot-rolled, turned and polished, of grade 51B60H, of a diameter of 1.25 inch
263	Wire of iron or non-alloy steel, of specification ASTM A475, electro galvanized, class A coating, of a thickness from 0.05 inch to 0.25 inch inclusive
264	Wire of iron or non-alloy steel, of specification ASTM A475, electro galvanized, class B coating, of a thickness from 0.05 inch to 0.25 inch inclusive
265	Wire of iron or non-alloy steel, of specification ASTM A475, electro galvanized, class C coating, of a thickness from 0.05 inch to 0.25 inch inclusive
266	Wire of iron or non-alloy steel, of specification ASTM B341, plated with aluminum, of a thickness from 0.09 inch to 0.2 inch inclusive
267	Wire of stainless steel, nickel coated, of type 304, 304L, 316 or 631, of specification ASTM A313 or ASTM A580, of a diameter of up to 5.75 mm
268	Rebar, in irregularly wound coils, of stainless steel, of grade 2304 or 2205, of specification ASTM A-955, of a thickness from 0.375 inch to 1.75 inches inclusive, of a yield strength of 65,000 psi
269	Bar and rod, of stainless steel, hot-rolled, in irregularly wound coils, of grade 25NI-20CR-6MO or 22CR-13NI-5MIN, of specification type 304, type 304L or type 303, of a diameter from 0.12 inch to 0.75 inch inclusive
270	Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section, of grade SCF 19 alloy, of a diameter from 3.5 inches to 10.5 inches inclusive
271	Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-564 type 630
272	Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-638 type 660
273	Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-705 type XM-13 or ASME SA-705 type 630
274	Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-479 type 304L
275	Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-540, of grade B21, B22, B23 or B24
276	Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASTM A434, of grade BD
277	Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of grade project 70+ of specification type 304/304L Stainless or project 70+ of specification custom 630 (17CR-4NI), of a diameter from 3.25 inches to 10 inches inclusive
278	Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grade project 70+ 15CR-5NI stainless, of specification type 34700, type 416 or type 416 RS, of a diameter from 1 inch to 10.75 inches inclusive
279	Bar and rod, of stainless steel, turned, ground and/or polished, not further worked than cold-formed, cold-drawn or cold-finished, of grade 431 or XM19, of a diameter from 1.25 inches to 1.5 inches inclusive
280	Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grade 416, of specification ASTM A582, of a thickness from 0.375 inch to 5 inches inclusive
281	Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section, of grade 2205 or 2304
282	Tubes, pipes and hollow profiles, of stainless steel, of circular cross-section, of specification ASTM A-500 Grade C
283	Pipe and tube, welded, of stainless steel, of grade 18 Cr Cb, of an outside diameter of 2 inches, of a wall thickness of 1.5 mm, of specification ASTM A554
284	Pipe and tube, welded, of stainless steel, of grade 439, of an outside diameter of up to 1 inch inclusive, of a wall thickness of up to 1.5 mm inclusive, of specification ASTM A554
285	Aluminum I-Beam, of alloy AA6061
286	Aluminum bars, rods and profiles, of any alloy of the 7000 series
287	Aluminum bars, rods, profiles or castings, of aluminum bronze alloy, of specification ASME SB-271, of type C95400
288	Aluminum plates, sheets and strip, of alloy AA1350, AA2024, AA 2124, AA2198, AA2219, AA2324, AA2524, AA5052, AA6013 or AA6061
289	Aluminum plates, sheets and strip, of any alloy of the 5000 series (including alloy 5052), of temper H32, H32P or H242, of a thickness exceeding 0.2 mm but less than 7 mm
290	Aluminum plates, sheets and strip, of any alloy of the 7000 series (including alloy 7040, 7050, 7055, 7075, 7085, 7140, 7150, 7175, 7474 or 7475)
291	Aluminum plates, sheets and strip, pre-painted, of grade 3003 or 5052, of temper H14, H32, or H34
292	Aluminum plates, sheets and strip, in coils, of alloy 5042, of temper H2E72 or H25, coated
293	Aluminum plates, sheets and strip, in coils, of alloy 5352, of temper H2E77, coated
294	Aluminum plates, sheets and strip, in coils, of alloy 5042 or 5182, of temper H48, coated
295	Aluminum reservoirs, tanks, vats and similar containers, of alloy AA5052, of a diameter of 12 inches
296	Aluminum collapsible tubular container, of alloy 1070, whether or not lined or heat-insulated, of a diameter of up to 2 inches inclusive, of a length of up to 8 inches inclusive
297	Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grade Custom 465, of specification AMS 5936, of a diameter of up to 8 inches
298	Flat-rolled product, of grade SA 516-70, HIC resistant, vacuum degassed, of a thickness of more than 0.375 inch
299	Flat-rolled product of iron or non-alloy steel, clad plated or coated with vitreous enamel, of a thickness of more than 0.375 inch
300	Flat-rolled product of iron or non-alloy steel, electrogalvanized, zinc-nickel coated, HY 100, vacuum degassed, HIC resistant, of a thickness of more than 0.375 inch
301	Flat-rolled product, of grade SA 516-70, clad, plated or coated with SA 240-317L stainless steel, of a thickness of more than 0.375 inch
302	Flat-rolled product, Chromoly steel, of grade SA 387-11 Class 2, of a thickness of more than 0.375 inch
303	Semi-finished product of other alloy steel, in ingots and other primary forms, of grades Aermet 100, 4340, CBS50NIL, 52100 or INVAR 36 Alloy, of a diameter from 1 inch to less than 8 inches
304	Ingots, of other alloy steel, of specification Electro-Slag Remelting (ESR), of FINKL STEEL proprietary grade MLQ XTRA, DCQ, SDQ, SXQ, 420M, DRX or XFS, of a diameter from 40 inches to 49 inches inclusive
305	Ingots, of other alloy steel, of specification Vacuum Arc Remelting (VAR), of FINKL STEEL proprietary grade MLQ XTRA, DCQ ,SDQ, SXQ , 420M, DRX or XFS, of a diameter from 40 inches to 49 inches
306	Semi-finished product of stainless steel, in ingots or other primary forms, of grade 15-15HS MAX, 15-15HS or 15-5, of specification Carpenter Stainless type 15CR-5NI, Carpenter 13-8 Stainless type 410 or Custom 630 (17CR-4NI) Stainless, of a diameter from 3.5 inches to less than 8 inches
307	Semi-finished product of stainless steel, of rectangular (other than square) cross-section, of grade A286, Carpenter custom 465 Stainless or Custom 450 Stainless, of specification type 17-4 or type 17-5, of a width from 7.5 inches to less than 8 inches
308	Semi-finished product of stainless steel, in ingots or other primary forms, of grade 440C, Pyromet 355 High temperature alloy, 15-15LC MOD or Carpenter Disk Quality VAR 15-5, of a diameter from 1 inch to less than 8 inches
309	Flat-rolled product of iron or non-alloy steel, not in coils, of grade ASTM A1011 HSLAS-F Grade 80, of a thickness from 0.059 inch to less than 0.071 inch, of a width of up to 20 inches, of a length of up to 120 inches
310	Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, of grade 1045 SAE J403, of a thickness of 3.89 mm
311	Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, annealed, of grade SAE J403 1050, of a thickness from 0.0758 inch to 0.111 inch inclusive, of a width from 6.97 inches to 10.2 inches inclusive
312	Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, annealed, of grade SAE J403 1075, of a thickness from 0.1573 inch to 0.181 inch inclusive, of a width of 5.325 inches
313	Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1074 SAE J403, of a thickness of 0.69 mm to 3.3 mm inclusive, of a width from 170 mm to 248 mm inclusive
314	Pipe and tube, straight seam, electric resistance welded, of circular cross-section, of grade 1008 or 1010 steel, Galfan coated or copper plated, of specification ASTM A513, SAE J356 or SAE J526, of an outside diameter from 0.157 inch to 1.375 inches inclusive, of a wall thickness from 0.02 inch to 0.083 inch inclusive
315	Flat-rolled product, of iron or non-alloy steel, in coils, galvanized, of specification ASTM A653 SS Grade 80 Class 2, of a thickness from 0.057 inch to 0.07 inch
316	Semi-finished bar, of ductile cast iron, of grade 60-40-18, annealed, of specification ASTM A-395
317	Flat-rolled product, hot-rolled, in coils, of grade HSLA 60, of a thickness from 0.05 inch to 0.063 inch inclusive
318	Flat-rolled product, hot-rolled, in coils, of grade HSLA 70, of a thickness from 0.05 inch to 0.063 inch inclusive
319	Flat-rolled product, hot-rolled, in coils, of grade HSLA 80, of a thickness from 0.05 inch to 0.063 inch inclusive
320	Flat-rolled product, cold-rolled, in coils, of grade HSLA 60, of a thickness from 0.02 inch to 0.105 inch inclusive
321	Flat-rolled product, cold-rolled, in coils, of grade HSLA 70, of a thickness from 0.02 inch to 0.105 inch inclusive
322	Flat-rolled product, cold-rolled, in coils, of grade HSLA 80, of a thickness from 0.02 inch to 0.105 inch inclusive
323	Flat-rolled product, cold-rolled, in coils, full hard, not annealed, of grade 1010, of a thickness of 0.0395 inch, of a width of 65.25 inches
324	Flat-rolled product, cold-rolled, in coils, full hard, not annealed, of grade 1010, of a thickness of 0.0396 inch, of a width of 68.875 inches
325	Flat-rolled product, cold-rolled, in coils, of grade 4130, of a thickness of 0.075 inch, of a width of 3 inches
326	Flat-rolled product, cold-rolled, in coils, of grade 1075, of a thickness of 0.134 inch, of a width of 1.437 inches
327	Flat-rolled product, cold-rolled, in coils, of grade 1050, of a thickness of 0.125 inch, of a width of 2.5 inches
328	Flat-rolled product, cold-rolled, in coils, of grade 1074, of a thickness of 0.074 inch, of a width of 3.5 inches
329	Round stainless steel wire, of grade 302, 304 or 316, of a diameter of more than 6.5 mm
330	Square or rectangular stainless steel wire, of grade 301, 302, 304 or 631, of more than 0.787 square mm in maximum solid cross-sectional area
331	Aluminum plates, sheets and strip, of alloy 1100, of any alloy of the 5000 series or of any alloy of the 6000 series
332	Round bar, of other alloy steel, of grade AISI 9310 or 9310-H, fine grain, vacuum degassed, cold drawn, annealed, turned, polished, of specification AMS 6260S
333	Round bar, of other alloy steel, of grade AISI 9310 or 9310-H, fine grain, vacuum degassed, cold drawn, annealed, turned, polished, of specification ASTM A108 – Level 3 or ASTM A304-11, of a diameter of more than 3.5 inches
334	Vacuum Insulated Tubing (VIT), seamless, with a thermal conductivity value of less than 0.002 BTU/hr-ft-F, of an outside diameter greater than 177.8 mm, of an inside diameter from 139.7 mm to 168.3 mm inclusive
335	Vacuum Insulated Tubing (VIT), Electric Resistance Welded, with a thermal conductivity value of less than 0.002 BTU/hr-ft-F, of an outside diameter greater than 177.8 mm, of an inside diameter from 139.7 mm to 168.3 mm inclusive
336	Pipe and tube, of iron or non-alloy steel, seamless, of grade 1026, of specification ASTM A 519, of an outside diameter of 10 inches, of a wall thickness of 0.5 inch
337	Tube, of other alloy steel, cold-drawn, seamless, of grade 4130, of specification AMS 6360, of a diameter of 0.75 inch or 1 inch, of a wall thickness of 0.035 inch or 0.156 inch
338	Pipe, of carbon steel Grade B Type E, with a polymer lining of PTFE (Polytetrafluoroethylene), PVDF (Polyvinylidene), PP (Polypropylene) or PFA (Perfluoroalkoxy), of a diameter of 1 inch to 12 inches inclusive
339	Round bar of stainless steel, of grade 317L, alloy 20 or alloy 2205
340	Carbon wire, in coils, plastic or nylon coated, cold-formed, conforming to standard ASTM F963-07
341	Plain end seamless casing, of a kind used to drill and operate gas storage caverns, of an outside diameter of 13.375 inches, of a torque of 79.67 lbs-ft or 91.25 lbs-ft, of specification P110 HC PSL-1
342	Flat-rolled product, of specification GMW3032M-ST-S CR180B2 U, of a nominal thickness of 1.5 mm
343	Flat rolled product, of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, of grade J2340 490XF, of a minimum thickness of 0.046 inch, of a width from 48 inches to 51 inches inclusive
344	Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade J2340 490XF, of a minimum thickness of 0.055 inch, of a width of 55.51 inches.
345	Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade J2340 550XF, of a thickness from 0.055 inch to 0.065 inch, of a width from 40 inches to 52 inches
346	Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade J2340 550XF, of a minimum thickness of 0.068 inch, of a width of 54.675 inches
347	Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade J2340 420XF, of a minimum thickness of 0.059 inch, of a width of 54.375 inches
348	Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade A506 4130 FP 95% spheroidized and annealed, of a thickness from 0.154 inch to 0.157 inch, of a width from 36 inches to 39 inches inclusive
349	Flat-rolled product, cold-rolled, annealed, of grade 1074 or 1075, of a thickness of 0.02 inch
350	Flat-rolled product, in coils, cold-rolled, of grade 060 HSLA, of a thickness of 3 mm, of a width of up to 160 mm
351	Flat-rolled product, cold-rolled, of specification GMW 3032M-ST-S-CR180B2, of a thickness of 0.0394 inch or 0.75 mm
352	Flat-rolled product, cold-rolled, of specification GMW 3032M-ST-S-CR420LA, of a thickness of 0.0378 inch or 0.8 mm (+/- 0.05 mm)
353	Flat-rolled product, cold-rolled, of specification GMW3032-ST-S-CR550 MPA, of a thickness of 0.0472 inch
354	Flat-rolled product, cold-rolled, of specification GMW 3399W-ST-S-CR590T/340Y, of a thickness of 0.0241 inch or 0.95 mm
355	Flat-rolled product, cold-rolled, of specification GMW 3399W-ST-S-CR690T/550Y, of a thickness of 0.045 inch
356	Flat-rolled product, cold-rolled, of specification MS.50002 LAC420Y480T, of a thickness of 1.7 mm (+/- 0.07 mm)
357	Flat-rolled product, cold-rolled, spheroidized and annealed, of grade 4130, of a minimum thickness from 0.059 inch to 0.197 inch
358	Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade J2340 420XF, of a minimum thickness of 0.0394 inch, of a width of 53.328 inches
359	Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade GMW3032 CR420, of a minimum thickness of 0.0433 inch, of a width of 49.575 inches
360	Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade GMW3339M-ST-S 980T/700Y, of a thickness from 0.055 inch to 0.075 inch, of a width from 31 inches to 46 inches inclusive
361	Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade J2340 420XF, of a thickness of 0.0591 inch, of a width of 43.839 inches
362	Flat-rolled product of non-alloy steel, cold-rolled, of grade A506 4130 FP 95% spheroidized and annealed, of a minimum thickness of 0.114 inch, of a width from 36 inches to 39 inches inclusive
363	Flat rolled product of non-alloy steel, not further worked than cold-rolled, of grade J2340 490XF, of a minimum thickness of 0.035 inch, of a width of 48.4 inches
364	Flat rolled product of non-alloy steel, not further worked than cold-rolled, of grade GMW3032 CR340, of a minimum thickness of 0.0213 inch, of a width of 51.375 inches
365	Flat rolled product of non-alloy steel, not further worked than cold-rolled, of grade GMW3032 CR340, of a minimum thickness of 0.0236 inch, of a width of 51.375 inches
366	Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, in coils, containing by weight 0.19% of carbon, of specification M190 Martinsite steel, of a thickness from 0.4 mm to 0.6 mm
367	Flat-rolled product of iron or non-alloy steel, of a width of less than 600 mm, not further worked than cold-rolled (cold-reduced), in coils, of specification S50-260x431000 SAE J403-1050 or S50-260x355000 SAE J403-1050, of a thickness from 2.5 mm to 2.7 mm inclusive
368	Flat-rolled product, of iron or non-alloy steel, cold-rolled, annealed, of grade 40 modified, of a thickness of 1.5 mm
369	Flat-rolled product, of iron or non-alloy steel, in coils, of grade SAE J403 1055, of a thickness from 1.1 mm to 2.2 mm, of a width from 86 mm to 146 mm inclusive
370	Flat-rolled product, of other alloy steel, not further worked than cold-rolled, of grade GMW3339M-ST-S 980T/550Y, of a minimum thickness of 0.049 inch, of a width from 33 inches to 59 inches inclusive
371	Flat-rolled product, cold-rolled, of grade 4130, of a thickness of 0.04 inch or 0.08 inch, of a width of 36 inches
372	Flat-rolled product, in coils, cold-rolled, of grade 4130, spheroidized, of a thickness of 2.5 mm, 2.9 mm or 3.5 mm, of a width from 47 mm to 153 mm inclusive
373	Flat-rolled product, in coils, cold-rolled, of grade SAE J404 4130, of a thickness from 2.5 mm to 4 mm inclusive, of a width from 47 mm to 270 mm inclusive
374	Flat-rolled product, cold-rolled, annealed, in coils, of grade 4140 or 4142, containing by weight 0.15% or less of chromium, containing by weight 0.05% or less of molybdenum, containing by weight 0.6% to 1.65% of manganese, of a thickness of 1.7 mm (+/- 0.08 mm), of a width from 101.5 mm to 480 mm (+/- 0.5 mm)
375	Flat-rolled product, of non-alloy steel, hot-rolled, plated or coated with zinc, of grade J1392 Gr70YF or J2340 490YF, of a thickness from 0.068 inch to 0.122 inch inclusive
376	Flat-rolled product, cold-rolled, in coils, nickel, brass or copper electroplated, of grade ASTM 1008, of a thickness of 0.008 inch to 0.03 inch
377	Aluminum collapsible tubular container, annealed, with exterior and interior coating, produced by an impact extrusion process
378	Aluminum aerosol container, annealed, with exterior and interior coating, produced by an impact extrusion process
379	Flat-rolled product, cold-rolled, of specification GMW3032M CR180B2, of a nominal thickness of 0.0472 inch
380	Flat-rolled product, cold-rolled, of specification GMW3032M CR210B2, of a minimum thickness of 0.081 inch
381	Flat-rolled product, cold-rolled, of specification GMW3032M CR270B2, of a minimum thickness of 0.057 inch
382	Flat-rolled product, cold-rolled, of specification GMW3399M CR780T/420Y, of a nominal thickness of 0.0787 inch
383	Flat-rolled product, cold-rolled, of specification J404 4130, of a nominal thickness of 0.118 inch or 0.194 inch
384	Flat-rolled product, cold-rolled, of specification J404 4130, of a minimum thickness of 0.059 inch, 0.138 inch or 0.1575 inch
385	Flat-rolled product, cold-rolled, galvanized, of specification GMW3032M CR180B2, of a minimum thickness of 0.0307 inch
386	Flat-rolled product, cold-rolled, galvanized, of specification GMW3032M CR340LA, of a minimum thickness of 0.03 inch
387	Flat-rolled product, galvanized, of specification J2340 420XF, of a minimum thickness of 0.083 inch
388	Flat-rolled product, cold-rolled, galvanized, of specification GMW3032M CR420LA, of a minimum thickness of 0.039 inch
389	Flat-rolled product, hot-rolled, of specification J2340 420 XF, of a minimum thickness of 0.051 inch
390	Flat-rolled product, hot-rolled, of specification J403 1037 modified, of a minimum thickness of 0.055 inch, 0.059 inch or 0.066 inch
391	Flat-rolled product, hot-rolled, pickled and oiled, of specification A606 Type 4 Corten, of a minimum thickness of 0.058 inch
392	Flat-rolled product, hot-rolled, pickled and oiled, of specification J2340 490XF, of a minimum thickness of 0.073 inch or 0.075 inch
393	Flat-rolled product, hot-rolled, pickled and oiled, of specification GMW3032M HR550LA, of a minimum thickness of 0.078 inch
394	Flat-rolled product, hot-rolled, pickled and oiled, of specification J2340 550 XF, of a minimum thickness of 0.065 inch, 0.07 inch or 0.075 inch or of a nominal thickness of 0.061 inch

22 Item 8 of Schedule 2 to the Order is repealed.

23 Items 28 to 31 of Schedule 2 to the Order are repealed.

24 Item 34 of Schedule 2 to the Order is replaced by the following:

Item	Column 1 Description of Goods
34	Hot-rolled abrasion resistant plate, of grade 200, of a thickness from 0.3125 inch to 0.313 inch inclusive, of a width of 120 inches, of a length of 240 inches or 288 inches

25 Items 44 and 45 of Schedule 2 to the Order are replaced by the following:

Item	Column 1 Description of Goods
44	Round bar, of grade C1045, of a diameter from 0.375 inch to 10 inches inclusive, turned, ground and polished (TG&P), of a minimum tensile strength of up to 100,000 psi
45	Round bar, of grade C1045, turned and polished (TP), of a diameter of 0.375 inch to 10 inches inclusive

26 Schedule 2 to the Order is amended by adding the following after item 46:

Item	Column 1 Description of Goods
47	Bar and rod, of grade 4330, 4330M or 4330NiMo5VCa4, of minimum yield strength of up to 165,000 psi inclusive, of a diameter from 1 inch to 4.062 inches inclusive
48	Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4330V MOD, of an outside diameter of 2.5 inches or 3.25 inches
49	Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4145H MOD, of an outside diameter of 2.875 inches
50	Angle, of iron or non-alloy steel, L section, not further worked than hot-rolled, hot-drawn or extruded, of grade A588-B, of a height of less than 3.15 inches, of leg dimensions of 3 inches by 2.5 inches, of a thickness of 0.375 inch, of a length of 20 feet
51	Aluminum bars, rods and profiles, of aluminum alloy AA2024 or AA2196
52	Flat-rolled product of iron or non-alloy steel, not in coils, of grade ASTM A1011 HSLAS-F Grade 80, of a thickness from 0.071 inch to 0.079 inch inclusive, of a width of up to 20 inches, of a length of up to 120 inches
53	Cold drawn round bar of alloy steel, of grade AISI 4140, of specification ASTM A193, ASTM A320 or MS-101, of a diameter from 0.446 inch to 2.914 inches inclusive
54	Bar of plain carbon steel, hot-rolled, in irregularly wound coils or not, of specification G30.18 400R, of an outside diameter from 10 mm to 35 mm inclusive, of a yield strength of 400 MPa, of a tensile strength of 540 MPa
55	Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, of grade SAE 1035 modified, of a thickness from 0.098 inch to 0.118 inch, of a width from 40 inches to 51.5 inches inclusive
56	Flat-rolled product, hot-rolled, of specification JSH270E, of a thickness of 0.0985 inch
57	Flat-rolled product, cold-rolled, of specficiation GMW3032M-ST-S CR210B2, of a thickness of 0.0614 inch
58	Flat-rolled product, cold-rolled, of specification GMW2M CR5, of a minimum thickness of 0.055 inch or 0.06 inch
59	Flat-rolled product, cold-rolled, of specification J403 10B21, of a minimum thickness of 0.079 inch or 0.115 inch or of a nominal thickness of 0.12 inch
60	Flat-rolled product, cold-rolled, galvanized, of specification GMW3032M CR420LA, of a minimum thickness of 0.035 inch
61	Flat-rolled product, galvanized, of specification J2340 490XF, of a minimum thickness of 0.0448 inch or 0.074 inch or of a nominal thickness of 0.079 inch, 0.09 inch or 0.094 inch
62	Flat-rolled product, galvannealed, of specification A653 HSLAS Grade 70, of a minimum thickness of 0.045 inch

27 The portion of item 14 of Schedule 3 to the Order in columns 2 and 3 is replaced by the following:

Item	Column 2 Description of Goods	Column 3 Period
14	Flat-rolled product of iron, non-alloy or other alloy steel, not further worked than cold-rolled, of grade 1018 AK, 1018 SK, 1020 AK, 1050, 420 XF, 550 XF, 4130 or 8620	From July 1, 2018 to November 14, 2018 inclusive

28 The portion of items 109 to 115 of Schedule 3 to the Order in column 1 is replaced by the following:

Item	Column 1 Business Number
109	121306914 or 718999485
110	121306914 or 718999485
111	121306914 or 718999485
112	121306914 or 718999485
113	121306914 or 718999485
114	121306914 or 718999485
115	121306914 or 718999485

29 The portion of item 159 of Schedule 3 to the Order in columns 1 and 2 is replaced by the following:

Item	Column 1 Business Number	Column 2 Description of Goods
159	894141241RM0003 or 894141241RM0004	Bar and rod, not further worked than cold-formed or cold-finished, of grade 4130 or 4340

30 The portion of item 162 of Schedule 3 to the Order in column 1 is replaced by the following:

Item	Column 1 Business Number
162	894141241RM0001 or 894141241RM0004

31 The portion of item 168 of Schedule 3 to the Order in column 1 is replaced by the following:

Item	Column 1 Business Number
168	894141241RM0001 or 894141241RM0004

32 The portion of item 172 of Schedule 3 to the Order in column 2 is replaced by the following:

Item	Column 2 Description of Goods
172	Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of grade A286, 17-4 PH, 15-5 PH, 347, 304L, 303Se, 347 or 303

33 The portion of items 174 to 176 of Schedule 3 to the Order in column 2 is replaced by the following:

Item	Column 2 Description of Goods
174	Flat-rolled product, hot-rolled or cold-rolled, of grade 4130 or 4340
175	Flat-rolled product, of other alloy steel, of a width of 600 mm or more, not further worked than hot-rolled, of grade 4340
176	Bar and rod, of other alloy steel, not further worked than hot-rolled, hot drawn or extruded, of grade 4330, 4330M or 4340

34 The portion of items 178 and 179 of Schedule 3 to the Order in column 2 is replaced by the following:

Item	Column 2 Description of Goods
178	Aluminum castings, angles, shims, forge or sheet to be cut into shims, of grade 356, 7075 or 7175
179	Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, of grade 7050 or 7075

35 The portion of items 183 and 184 of Schedule 3 to the Order in column 2 is replaced by the following:

Item	Column 2 Description of Goods
183	Aluminum bar (rectangular, round or square) or extrusions, of grade 7075 or 7150
184	Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, of grade 2024, 2124, 2219, 2324, 6061, 7050, 7075, 7140, 7175 or 7475

36 The portion of items 233 and 234 of Schedule 3 to the Order in column 2 is replaced by the following:

Item	Column 2 Description of Goods
233	Flat-rolled product, not further worked than cold-rolled, of specification GMW3032M-ST-S or SAE J2340
234	Flat-rolled product, galvanized, of specification GMW3032M-ST-S or SAE J2340

37 The portion of item 283 of Schedule 3 to the Order in column 2 is replaced by the following:

Item	Column 2 Description of Goods
283	Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification SAEJ1392 050XF or SAEJ1392 550XF, of a thickness from 0.0551 inch to 0.063 inch inclusive

38 The portion of item 292 of Schedule 3 to the Order in columns 2 and 4 is replaced by the following:

Item	Column 2 Description of Goods	Column 4 Conditions
292	Flat-rolled product, hot-rolled, of specification WSS-M1A346 Grade A5, of a thickness from 0.1397 inch to 0.1437 inch inclusive	For use in the manufacture of original equipment parts or other parts

39 The portion of item 296 of Schedule 3 to the Order in column 3 is replaced by the following:

Item	Column 3 Period
296	From July 1, 2018 to May 20, 2019

40 The portion of item 310 of Schedule 3 to the Order in column 2 is replaced by the following:

Item	Column 2 Description of Goods
310	Bar and rod, in coils, of grade 1537M, 4119M or 4318M, of a diameter from 19.05 mm to 30.16 mm inclusive

41 Schedule 3 to the Order is amended by adding the following after item 314:

Item	Column 1 Business Number	Column 2 Description of Goods	Column 3 Period	Column 4 Conditions
315	890975758	Round bar, of grade C1045, of a diameter from 1.5 inches to 3.5 inches inclusive, turned, ground and polished (TG&P)	For goods imported on or after July 1, 2018	For use in the manufacture of original equipment parts or other parts
316	890975758	Round bar, of grade C1045, turned and polished (TP), of a diameter of 0.75 inch	For goods imported on or after July 1, 2018	For use in the manufacture of original equipment parts or other parts
317	132644584	Aluminum profiles, produced by an impact extrusion process, of alloy 6061-T6, of an outside diameter of up to 55 mm, of a wall thickness from 3.5 mm to 5.5 mm inclusive	For goods imported on or after July 1, 2018	For use in the manufacture of original equipment parts or other parts
318	780854485	Special Bar Quality (SBQ) bars, of grade AISI C-1536, A-4623-M, C-1541-VM, OP15, A-4320-M, A-4138-M, A-4330-M or A-4142-M, of chemical analysis in accordance with ASTM A751, of tensile strength in accordance with ASTM A370, of hardness in accordance ASTM E18, of a diameter from 0.625 inch to 1.5 inches inclusive, and of a length from 25 feet to 30.2 feet inclusive	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
319	103430336 or 856874649	Flat bar, hot-rolled, of grade AISI 1526 or 1527, of a thickness of 0.25 inch, of a width of 1 inch or 1.25 inches	For goods imported on or after July 1, 2018	For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
320	103430336 or 856874649	Flat bar, hot-rolled, of grade AISI 1526 or 1527, of a thickness of 0.375 inch, of a width of 1.25 inches, 1.5 inches, 1.75 inches, 2.25 inches or 2.375 inches	For goods imported on or after July 1, 2018	For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
321	103430336 or 856874649	Flat bar, hot-rolled, of grade AISI 1526 or 1527, of a thickness of 0.5 inch, of a width of 2 inches or 2.5 inches	For goods imported on or after July 1, 2018	For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
322	103430336 or 856874649	Flat bar, hot-rolled, of grade AISI 1526 or 1527, of a thickness of 0.625 inch, of a width of 2 inches or 2.5 inches	For goods imported on or after July 1, 2018	For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
323	103430336 or 856874649	Flat bar, hot-rolled, of grade mild steel A36, of a thickness of 0.1875 inch, of a width of 2.5 inches	For goods imported on or after July 1, 2018	For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
324	103430336 or 856874649	Flat bar, hot-rolled, of grade mild steel A36, of a thickness of 0.5 inch, of a width of 2 inches	For goods imported on or after July 1, 2018	For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
325	103430336 or 856874649	Flat bar, hot-rolled, of grade mild steel A36, of a thickness of 0.75 inch, of a width of 3 inches or 4 inches	For goods imported on or after July 1, 2018	For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
326	103430336 or 856874649	Flat bar, hot-rolled, of grade mild steel A36, of a thickness of 1 inch, of a width of 3 inches, 4 inches or 6 inches	For goods imported on or after July 1, 2018	For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
327	103430336 or 856874649	Flat bar, hot-rolled, of grade mild steel A36, of a thickness of 2 inches, of a width of 3 inches	For goods imported on or after July 1, 2018	For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
328	103430336 or 856874649	Round bar, hot-rolled, of grade AISI 1526 or 1527, of a diameter of 0.75 inch, 0.875 inch or 1 inch	For goods imported on or after July 1, 2018	For use in the manufacture of original equipment parts or other parts or goods imported for sale to company with business number 103430336
329	131695603	Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, of specification GMW3032M-ST-S HR340LA, GMW3032M-ST-S HR550LA, SAE J2340 340XF or SAE J2340 550XF	From July 1, 2018 to December 31, 2018	For use in the manufacture of original equipment parts or other parts
330	131695603	Flat-rolled product, of iron or non-alloy steel, in coils, cold-rolled, of specification GMW3032M-ST-S CR340LA or GMW3032M-ST-S CR420LA	From July 1, 2018 to December 31, 2018	For use in the manufacture of original equipment parts or other parts
331	753425081	Bar, round, of stainless steel, of grade A286, of specification AMS 5732	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
332	753425081	Bar, round or hexagonal, of stainless steel, of grade 321, of specification AMS 5645 or QQ-S-763	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
333	753425081	Bar, round, of stainless steel, of grade 304, of specification AMS 5639	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
334	753425081	Bar, round, of stainless steel, of grade 303 or 303Se, of specification ASTM A582, AMS 5641 or AMS 5738	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
335	753425081	Bar, round, of stainless steel, of grade 302, of specification MIL-S-7720	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
336	753425081	Bar, round, of other alloy steel, of grade 4340, of specification AMS 6414 or AMS 6415	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
337	753425081	Bar, round, of other alloy steel, of grade 4130, of specification AMS 6348	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
338	753425081	Bar, round, of other alloy steel, of grade 4140, of specification AMS 6382, AMS 6349 or AMS-S-5626	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
339	753425081	Tube, of other alloy steel, of grade 4130, of specification AMS 6360	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
340	753425081	Flat-rolled product, of other alloy steel, of grade 4130, of specification AMS 6345	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
341	102251972	Tube, seamless or electric resistance welded, of grade L80, of an outside diameter of 2.875 inches	From July 1, 2018 to May 20, 2019
342	710327693	Flat-rolled product of grade 350 AT, of specification CSA G40.21	From July 1, 2018 to December 31, 2018 inclusive	For imports recorded under the transaction number 12997231584049 (B3-3 Form)
343	866460074	Flat-rolled product, cold-rolled, spheroidized and annealed, of grade 1035, 1045 or 1050, of a width from 33 mm to 246 mm inclusive, of a thickness from 2.9 mm to 7.1 mm inclusive	For goods imported on or after July 1, 2018	For use in the manufacture of original equipment parts or other parts
344	122016587	Flat-rolled product, cold-rolled, annealed, of grade 1074 or 1075, of a thickness of 0.02 inch	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
345	122016587	Bar of stainless steel, round or rectangular, of grade 15-5PH, of specification AMS 5659	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
346	122016587	Flat-rolled product, hot-rolled, of grade 4130, of a thickness of 0.09 inch, of a width of 36 inches	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
347	122016587	Flat-rolled product, cold-rolled, of grade 4130, of a thickness of 0.04 inch or 0.08 inch, of a width of 36 inches	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
348	122016587	Bar, hot-rolled, of grade 4340, of specification AMS 6415, of a diameter of 3.5 inches, 5.25 inches or 5.5 inches	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
349	122016587	Aluminum bar, round, annealed, of specification AMS 4000 or 4102, of a diameter of 0.4375 inch	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
350	889457701	Bar and rod, of grade 8620, of a diameter from 4.25 inches to 7 inches inclusive	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
351	107388720	Coded fish tag of stainless steel, of dimensions of 1.1 mm by 0.25 mm	For goods imported on or after July 1, 2018
352	119354884	Sections of iron or non-alloy steel, hot-rolled, of grade 1012, of specification ASTM A-576, of a width of 5.5 inches or more, of a length of 18 feet or more	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
353	102251972	Tube, of non-alloy or alloy steel, seamless, of specification A.P.I. L80, C90, T95 or P110, of an outside diameter greater from 60.32 mm to 114.3 mm inclusive	From July 1, 2018 to May 20, 2019
354	102251972	High strength sour service casing, of specification A.P.I. Grade C90, T95, C110 or equivalent proprietary specification, of an outside diameter from 114.3 mm to 244.5 mm inclusive	From July 1, 2018 to May 20, 2019
355	102251972	Tube, of non-alloy or alloy steel, of specification A.P.I. L80 or P110, of an outside diameter from 60.32 mm to 114.3 mm inclusive	From July 1, 2018 to May 20, 2019
356	102963790	Rectangular welded tube, of specification SAE 1008/1010 ASTM A513, of a wall thickness of 0.042 inch, of dimensions of 0.75 inch by 1 inch by 9.2 inches	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
357	106234289	Hollow core aluminum extrusion, of alloy 6005A or 6061	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
358	106234289	Flat-rolled product, welded, consisting of an aluminum sheet of alloy 5083 and a steel sheet of grade Q345	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
359	106234289	Aluminum bar, of alloy 6061, of a width of 12.1 inches, of a height of 3.725 inches, of a length of 74.25 inches	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
360	140515958	Aluminum profile, not hollow, of alloy 6063-T5, of a diameter of up to 0.332 inch inclusive, consisting of three or five blades	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
361	100770320	Aluminum bars, rods and profiles, of aluminum alloy of the 6000 series, of a nominal wall thickness from 0.03 inch to 0.1 inch	From July 1, 2018 to May 20, 2019
362	890975758	Flat-rolled products, bars, rods, angles, shapes, sections, tubes, pipes or hollow profiles, of non-alloy or alloy steel	From March 19, 2019 to May 20, 2019	For use in the manufacturing of agricultural equipment and transferred from UND 58703 location
363	856874649	Bar, of grade 400W, of metric bar size 10M, 15M, 20M, 25M or 30M	From July 1, 2018 to May 20, 2019	Goods imported for sale to company with business number 103605371 and ordered under purchase order number 663057 or 18-11017
364	856874649	Bar, of grade 50, of a diameter of 0.625 inch or 0.875 inch	From July 1, 2018 to May 20, 2019	Goods imported for sale to company with business number 103605371 and ordered under purchase order number 18-11017 or 18-12005
365	811893296	Flat-rolled product, in coils, galvannealed, of grade Prime Deep Drawing Quality (DDQ) or Prime Extra Deep Drawing Quality (EDDQ), of a thickness from 0.0449 inch to 0.048 inch inclusive	From July 1, 2018 to May 20, 2019	For use in the manufacture of parts
366	101087963	Parts for fireplace, classified under tariff item 7304.51.00, 7306.90.00, 7321.90.10, 7321.90.23, 7321.90.90 or 7616.99.90	From July 1, 2018 to May 20, 2019	Parts sold by Hearth & Home Technologies
367	104613658	Grouser bar, merchant bar quality (MBQ), hot-rolled, of grade 1070, of Rockwell hardness of 25 to 30	From July 1, 2018 to May 20, 2019
368	104708409	Hot-rolled black carbon steel plate, of specification ASTM A572-50 modified, of a thickness from 0.3125 inch to 0.5625 inch, of a width of 96 inches, of a length of 312 inches	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
369	104708409	Hot-rolled black carbon steel plate, of specification ASTM A36 modified, ABS Grade A, of a thickness from 0.25 inch to 0.5 inch, of a width of 96 inches, of a length of 312 inches	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
370	101131027	Flat-rolled product of iron or non-alloy steel, of structural steel Grade 33, in-line tension levelled (max shape of less than 15 I-units), galvanized to specification HDG G90, of a width of 48 inches, of a minimum thickness from 0.018 inch to 0.0235 inch inclusive	From July 1, 2018 to May 20, 2019	For use in the manufacture of parts
371	104708409	Flat-rolled product, not further worked than cold-rolled, in coils, of specification SAE J403, of grade 1010, of a thickness of 0.018 inch or 0.02 inch, of a width of 42 inches	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
372	104546718	Flat-rolled product, cold-rolled, galvanized, of grade HSLA 420LA, of a nominal thickness of 0.098 inch, of a width of more than 50 inches	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
373	104546718	Flat-rolled product, galvanized, of specification GMW3032M-ST-S-500LA, of a thickness of 0.045 inch or more	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
374	794117093	Flat-rolled product, hot-rolled, of trademarked grade HSLA TuffDOM 620, alloyed with vanadium, of a minimum thickness of 0.342 inch, 0.362 inch, 0.394 inch or 0.416 inch	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
375	794117093	Flat-rolled product, hot-rolled, of grade HSLA 70XF, alloyed with vanadium, of a minimum thickness of 0.13 inch	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
376	780318317	Flat-rolled product, in coils, cold-rolled, of specification HFT 440 or HFT 590, of a thickness of 1.2 mm or 1.73 mm	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
377	780318317	Flat-rolled product, in coils, cold-rolled, of specification DI-FORM 140T, DEV DI-FORM T590, DEV DI-FORM T1180 or DEV DI-FORM T980Y600, of a thickness from 0.8 mm to 2 mm inclusive	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
378	780318317	Flat-rolled product, in coils, cold-rolled, of specification TSG3100G SPC590DU, of a thickness from 1.2 mm to 1.8 mm inclusive	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
379	780318317	Flat-rolled product, hot-rolled or cold-rolled, galvannealed of specification TSG3109G SCGA590DU, TSG 3109G SCGA780DU, TSG 3109G SCGA980DUB or TSG SCGA1190DUB, of a thickness from 1 mm to 2.3 mm inclusive	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts
380	780318317	Flat-rolled product, hot-rolled or cold-rolled, galvannealed, of grade Extra Deep Drawing Steel (EDDS), of a thickness from 0.6 mm to 0.8 mm inclusive	From July 1, 2018 to May 20, 2019	For use in the manufacture of original equipment parts or other parts

42 Schedule 4 to the Order is amended by adding the following after item 6:

Item	Column 1 Tariff Item	Column 2 Description of Goods
7	9404.21.00	Of cellular rubber or plastics, whether or not covered, for use in Canadian manufactures
8	3923.21.90	Other, for use in Canadian manufactures
9	3923.29.90	Other, for use in Canadian manufactures
10	1602.50.99	Other, for use in Canadian manufactures
11	4412.99.90	Other, for use in Canadian manufactures

Coming into Force

43 This Order comes into force on the day on which it is registered.

REGULATORY IMPACT ANALYSIS STATEMENT

(This statement is not part of the Order.)

Issues

In response to the tariffs on Canadian steel and aluminum imposed by the United States (U.S.), the Government of Canada stood up for our country’s steel and aluminum workers, industries, and communities by imposing countermeasures (surtaxes) against imports of steel, aluminum, and other products from the U.S., to encourage the full removal of U.S. tariffs.

Canada stood firm and did not back down until the tariff removal was agreed on May 17, 2019. As part of that understanding, the U.S. and Canada removed their tariffs and countermeasures, as announced on May 20, 2019.

Given the long-standing integration of Canada–U.S. supply chains, the Government recognized that Canadian countermeasures against U.S. imports can create challenges for Canadian manufacturers that rely on inputs imported from the U.S. On July 11, 2018, the Government established a remission framework to address those challenges. With the repeal of Canada’s countermeasures, remission of surtaxes is of interest to importers as it allows for refunds of surtaxes paid prior to May 20, 2019, on imports of eligible goods.

Pursuant to requests for remission of surtaxes by importers, and following consultations with Canadian steel and aluminum producers, the United States Surtax Remission Order (the “Order”) entered into force on October 11, 2018, to provide relief from surtaxes on imports of steel and aluminum in circumstances of short supply (e.g. for products that are not manufactured, or are not available in sufficient quantities, in Canada). Steel goods subject to the Order included certain steel plates, hot-rolled and cold-rolled sheets, bars, rods, pipes, tubes and stainless steel products. Aluminum goods included sheets and cans. The Order also provided remission of surtaxes for boats in certain situations of pre-existing contractual obligations, and goods imported temporarily for repair, alteration or storage.

Following the assessment of additional requests for remission of surtaxes, the Order Amending the United States Surtax Remission Order (SOR/2018-205) entered into force on December 17, 2018. That Order expanded the scope of steel, aluminum and other goods eligible for remission of surtaxes, including under situations where contractual requirements existing before the surtaxes were applied obliged Canadian businesses to keep sourcing steel and aluminum from the U.S.

Likewise, the Order Amending the United States Surtax Remission Order, No. 2019-1 entered into force on April 15, 2019, to further expand the scope of remission of surtaxes granted based on pre-existing contractual requirements.

Pursuant to the assessment of remaining remission requests submitted prior to the repeal of Canada’s countermeasures, the Order Amending the United States Surtax Remission Order, No. 2019-2 (the “amending Order”) further expands the scope of steel, aluminum and other products imported from the U.S. eligible for remission of surtaxes, mainly on the basis of short supply. These requests have been assessed along the same established criteria of the past remission orders.

Background

On July 1, 2018, the United States Surtax Order (Steel and Aluminum) came into force to apply Canadian surtaxes of 25% on steel products, and 10% on aluminum products, imported from the U.S. Similarly, the United States Surtax Order (Other Goods) also entered into force to apply surtaxes of 10% on various goods imported from the U.S. Under both Orders, the surtaxes affected $16.6 billion of imports on an annual basis from the U.S.

Canadian manufacturers operating in a wide array of economic sectors including auto and auto parts, construction, defence, aerospace, processed metals, machinery manufacturing and energy infrastructure rely on inputs from the U.S., in particular steel and aluminum inputs.

Remission represents an exception to the rules by providing relief from applicable surtaxes to address exceptional and compelling circumstances that, from a public policy perspective, are found to outweigh the primary rationale behind the application of surtaxes.

The Government considered requests for remission of surtaxes in the following instances:

1. To address situations of short supply in the domestic market, either on a national or regional basis.
2. Where there are contractual requirements, existing prior to May 31, 2018, for Canadian businesses to use U.S. steel or aluminum in their products or projects.
3. To address, on a case-by-case basis, other exceptional circumstances that could have severe adverse impacts on the Canadian economy.

Objective

The objectives of the amending Order are to

provide retroactive relief from surtaxes on additional steel, aluminum and other goods, determined to be in short supply in Canada at the time of importation;
provide retroactive relief from surtaxes for additional specific companies that cannot avoid the surtaxes due to existing contractual obligations or particular exceptional circumstances to source steel and aluminum from the U.S.; and
make technical amendments to ensure that the scope of remission of surtaxes for steel and aluminum products already covered under the Order applies as intended.

Description

Pursuant to section 115 of the Customs Tariff, the amending Order remits surtaxes paid on imports of certain steel, aluminum and other goods from the U.S.

The amending Order

retroactively remits surtaxes to any importer for 211 additional steel products, 15 additional aluminum products, and five other goods, imported on or after July 1, 2018, and determined to be in ongoing short supply at the time of importation;
retroactively remits surtaxes to any importer for 15 additional steel products and one additional aluminum product, as well as all products listed in Schedule 2 of the Order, imported from July 1, 2018, to May 20, 2019, and determined to be in temporary short supply at the time of importation;
provides retroactive remission of surtaxes for 14 additional specifically identified companies faced with contractual obligations that existed prior to May 31, 2018, or exceptionally challenging circumstances (e.g. conditions of competition that could unduly affect reliability of supply, and size of the company), requiring them to source steel and aluminum products in the U.S.; and
amends 32 product descriptions in Schedule 1 and Schedule 2 of the Order to ensure that the scope of remission of surtaxes for steel and aluminum products already covered under the Order applies as intended (e.g. to expand or to narrow the descriptions of goods eligible for remission).

Regulatory development

Consultation

Consistent with the approach taken for the previous Remission Orders, Canadian steel and aluminum producers were consulted in May 2019 on supply conditions in Canada for additional steel and aluminum goods claimed to be in short supply by remission requestors. Their views informed the short supply determinations made by the federal interdepartmental committee, which advised the Minister of Finance on recommendations to grant remission of surtaxes for additional steel and aluminum goods in the context of the amending Order.

This amending Order was not prepublished. The necessary consultations with the steel and aluminum producers were carried out, as appropriate, to determine its scope of application.

The Government has established a committee on the remissions process, in order to provide a forum for users of steel and aluminum products to share their views concerning the remission process and their efforts to secure Canadian sources of supply. The committee has met periodically since its establishment in October 2018 up until the repeal of Canada’s surtaxes announced on May 20, 2019.

Modern treaty obligations and Indigenous engagement and consultation

The amending Order does not impact Indigenous peoples rights and interests.

Instrument choice

Section 115 of the Customs Tariff provides the authority for the Governor General in Council to remit surtaxes on the recommendation of the Minister of Finance.

Regulatory analysis

Costs and benefits

In accordance with the criteria that have been set out, remission of surtaxes is provided in respect of goods where the negative effects of the surtaxes outweigh the benefits of their application. This includes goods where remission of the surtaxes provides relief to downstream manufacturers without undermining the broader purpose the surtaxes previously served.

Small business lens

There are no significant costs imposed on small business resulting from the amending Order. Small businesses claiming a refund of surtaxes paid would submit forms requesting refunds for the surtax paid on importations, accompanied by supporting documentation establishing that the imported goods qualify for remission. The administrative burden would be limited as businesses would only make a few refund claims covering past transactions.

“One-for-One” Rule

The “One-for-One” Rule applies to the amending Order, as there is an administrative burden associated with applying for remission of surtaxes that have been paid. However, the amending Order is exempted from the “One-for-One” Rule as it is related to tax and tax administration.

The administrative costs for Canadian businesses to claim remission of the surtaxes are expected to be limited. Importers would submit forms requesting refunds for the surtax paid on importations, accompanied by supporting documentation establishing that the imported goods qualify for remission. The administrative burden would be limited as businesses would only make a few refund claims covering past transactions.

Regulatory cooperation and alignment

The amending Order is not related to a work plan or commitment under a formal regulatory cooperation forum.

Strategic environmental assessment

In accordance with The Cabinet Directive on the Environmental Assessment of Policy, Plan and Program Proposals, a preliminary scan concluded that the amending Order would not result in positive or negative environmental effects; therefore, a strategic environmental assessment is not required.

Gender-based analysis plus

No gender-based analysis plus (GBA+) impacts have been identified for the amending Order.

Implementation, compliance and enforcement, and service standards

The Canada Border Services Agency (CBSA) will assess any claims for remission made pursuant to the amending Order and will ensure compliance with its terms and conditions in the normal course of its administration of customs and tariff-related legislations and regulations. In doing so, the existing administrative framework will be leveraged to ensure that costs can be managed within existing resources. Any refund issued pursuant to the amending Order will be administered by the CBSA. Depending on the volumes and complexity of refund submissions, the CBSA strives to achieve a 90-day processing standard.

Contact

Paul Huynh
International Trade Policy Division
Department of Finance Canada
Ottawa, Ontario
K1A 0G5
Telephone: 613‑369‑3804

Language selection

Search