Canada Gazette, Part I, Volume 151, Number 44: Regulations Amending the Toys Regulations (Magnetic Toys)

November 4, 2017

Statutory authority

Canada Consumer Product Safety Act

Sponsoring department

Department of Health

REGULATORY IMPACT ANALYSIS STATEMENT

(This statement is not part of the Regulations.)

Executive summary

Issues: While magnetic children's toys had been popular for decades and used without magnet-related health or safety concerns, around 2003 there was a proliferation in the use of small powerful magnets in toys. This resulted in reports of children of all ages ingesting them and suffering serious, life-threatening internal injuries. The small powerful magnets involved in these incidents were made of rare earth elements and they had a much stronger power to attract to one another than magnets previously common in toys (such as ceramic magnets or flexible rubber magnets). Many rare earth element magnets are so powerful that if ingested they can attract across several layers of intestinal tissue. Some ingestion incidents have resulted in considerable damage to intestinal tissues and required emergency surgical treatment; in some cases, children face serious long-term health consequences.

To address this serious ingestion hazard, mandatory safety requirements for magnetic toys have been in place in the United States since 2008 and in the European Union since 2009. Health Canada (the Department) focused its early risk management efforts, starting in 2006, on providing safety information and advisories to inform and educate the public and the toy industry. Since 2013, Health Canada has considered certain magnetic toys to pose a danger to human health or safety within the meaning of the Canada Consumer Product Safety Act (CCPSA); therefore, their manufacture, import, advertisement or sale in Canada is prohibited. However, this policy is not reflected in Health Canada's Toys Regulations (the Regulations).

Magnetic attraction continues to be a popular play feature in children's toys. The regulatory amendments incorporating requirements and tests will now consolidate all magnetic toy requirements in an accessible, transparent and consistently applied manner.

Description: The proposed amendments to the Regulations under the CCPSA include a restriction on both the size and the attractive strength of magnetic toys and magnetic components of toys, with consideration for functional magnets in electronic components and magnets contained in advanced experimental kits for older children. The proposed amendments also set out a series of integrity tests to verify that dangerous magnetic components do not separate from a toy or its components when used.

Cost-benefit statement: A cost-benefit analysis (CBA) concluded that the amendment would have low economic costs, given that the majority of toy manufacturing occurs outside Canada and that the majority of magnetic toys available in Canada are likely to meet magnet-related toy safety requirements in place in the United States and the European Union. The total 10-year costs to industry of the proposed amendments are estimated to be approximately $94,610 (present value, 2016 price level) for product redesign and annual testing.

In terms of benefits, the proposed amendments are expected to result in fewer injuries to children, and they should decrease the need for medical attention or hospitalization by reducing the availability of dangerous magnetic toys. The total 10-year benefits are estimated to be approximately $2.4 million (present value, 2016 price level) based on a reduction in injuries and treatment costs. A sensitivity analysis was completed as part of the CBA. It demonstrated that if the present value of costs is five times higher than estimated and the present value of benefits is 80% lower than estimated (which could reflect a situation where the majority of magnetic toys on the market already meet the requirements outlined in Health Canada's policy), a small net benefit of $15,000 over 10 years is still estimated.

The net benefit is estimated at $2.3 million over 10 years (2017 to 2026) [present value, 2016 price level].

“One-for-One” Rule and small business lens: The “One-for-One” Rule does not apply, since the proposed amendments will not impose any administrative costs on industry. The small business lens does not apply because the estimated nationwide cost impact of the proposed amendments is less than $1 million per year.

Domestic and international coordination and cooperation: The proposed amendments will align Health Canada's safety requirements and tests for magnetic toys with those set out in law in the United States and the European Union.

Background

The Hazardous Products (Toys) Regulations came into force under the Hazardous Products Act in 1970 and were transferred in 2011 as the Toys Regulations (the Regulations) under the Canada Consumer Product Safety Act (CCPSA). Along with other provisions and regulations under the CCPSA, the Regulations help protect Canadian children from a wide range of hazards when they interact with toys. However, they do not currently reflect the Department's view that certain magnetic toys pose a danger to human health or safety and are therefore prohibited.

A proliferation in the use of small powerful magnets in a wide variety of children's toys began in 2003. These small powerful magnets were made of rare earth elements, and they had a much stronger power to attract to one another than magnets previously common in toys (such as ceramic magnets or flexible rubber magnets). Powerful magnets that are very small can be easily swallowed. The strength of these powerful magnets makes them capable of attracting each other through up to six layers of intestinal wall. (see footnote 1) The magnet ingestion hazard is considered a hidden hazard because the consequences of ingesting powerful magnets are not obvious. The early symptoms a child eventually develops resemble a stomach flu, and medical attention may not be sought until severe trauma has developed. The injury is even difficult for physicians to diagnose because of the flu-like symptoms. In 2005, a 20-month-old child in the United States died after ingesting magnets. (see footnote 2) Dozens of surgeries had already been performed in the United States by 2007. (see footnote 3)

Due to the serious ingestion hazard posed by small powerful magnets in children's toys, several jurisdictions, including Canada, have implemented risk management strategies to help reduce incidents. Initial risk management actions taken in the United States focused on public education and advisories. In addition, in the United States, mandatory safety requirements were established under the ASTM F963 toy safety standard in 2008. In the European Union, mandatory safety requirements were established under the EN 71-1 toy safety standard in 2009. The international ISO 8124-1 toy safety standard set out requirements for magnets in 2012. The magnet-related requirements across the current editions of these three standards are aligned. (see footnote 4) (see footnote 5) (see footnote 6)

Similar to the United States, Health Canada focused its early risk management efforts, starting in 2006, on providing safety information and advisories to inform and educate the public and the toy industry about the serious ingestion hazard that small powerful magnets in toys pose to children. Health Canada has also

Issues

Unlike other small objects that are more likely to pass normally through the digestive system if ingested, when more than one powerful magnet is ingested in a short period of time, the magnets can attract to one another while moving through the intestines. When magnets attract across tissues, they can twist the intestines and create a blockage or slowly tear through the intestinal walls. (see footnote 9) (see footnote 10) Some ingestion incidents have required emergency surgical treatment and have resulted in considerable damage to intestinal tissues; in some cases, children face long-term health consequences as a result of the injuries they sustained. (see footnote 11)

Children swallow the powerful magnets in foreseeable ways during play, either intentionally or unintentionally. Young children are vulnerable to incidents because of their exploratory mouthing behaviour. Older children are vulnerable to incidents because the strength of magnetic attraction enables a multitude of creative play opportunities generally unrelated to the manufacturer's intent for a toy. Incident reports indicate that older children swallow magnets when they mistake magnets for candy, use their teeth to separate magnets when building structures, attach magnets to their braces, attach magnets across their cheek, use the magnets to pretend to have a lip or tongue piercing, and use the magnets in other ways. (see footnote 12)

In 2005, a 20-month-old child in the United States died after ingesting several powerful magnets that had separated from the plastic pieces of a magnetic toy building set. (see footnote 13) In April 2007, the U.S. Consumer Product Safety Commission was aware of at least 33 cases of children, aged 10 months to 11 years, ingesting powerful magnets and requiring emergency surgery to remove the magnets and repair damage to the intestines. (see footnote 14)

Complete information on the number of non-fatal and fatal injuries to Canadian children involving small powerful magnets in toys is not available. Information on injuries involving magnets was provided by the Canadian Hospitals Injury Reporting and Prevention Program (CHIRPP). CHIRPP records are based on the collection and analysis of data on injuries to people (mainly children) who are seen in emergency rooms of participating hospitals in Canada. CHIRPP records, which cover a six-year period starting from 2005, indicate that of 327 magnet-related cases recorded, the most common injury was related to ingestion of one or more magnets (73%). Notably, the cases identified do not represent all injuries in Canada during that period, but only those seen at the emergency departments of the 16 hospitals in the CHIRPP network at the time. With respect to the patient age distribution, approximately

In terms of patient outcomes, 53% of the cases required emergency room treatment, and 3% required hospital admission. Most of the cases that led to hospital admission involved magnet ingestion. No further specificity on the products involved, nature of injuries sustained, treatments, or outcomes is available from the CHIRPP records.

In addition to the CHIRPP hospital data, Health Canada has received four direct reports of Canadian children ingesting magnetic toy components. In two of the cases, the children, aged three years and seven years, sustained no injuries. In 2008, a five-year-old child required emergency surgery to repair eight bowel perforations that resulted from ingesting two magnetic components from a building toy. (see footnote 15) (see footnote 16) In 2014, a three-year-old child ingested powerful magnetic components from a toy building set sold between 2006 and 2009. Fortunately, the child's parent witnessed the swallowing of one component and they brought the child to the hospital where one of the components was removed non-surgically and the other passed uneventfully in the child's stool. (see footnote 17)

The CHIRPP data review was limited to six years starting from 2005, because around 2010, cases of ingestion of small powerful magnets or magnetic components from toys became difficult to distinguish from those involving magnets from novelty magnet sets. Around 2010, novelty magnet sets — which are considered to be those often marketed as desk toys and stress relievers for adults — became prevalent on the Canadian market. Despite generally being marketed to individuals 14 years of age and older, magnets from these sets found their way into the hands of children, followed by the same ingestion and injury pattern that was seen with small powerful magnets and magnetic components in toys. (see footnote 18) (see footnote 19)

In 2013, the Department concluded an assessment of the risks posed by small powerful magnets and determined that some novelty magnet sets, and certain magnetic toys, pose a danger to human health or safety and are therefore prohibited under sections 7 and 8 of the CCPSA. In that year, Health Canada also completed a market survey of more than 100 retail outlets and identified over 700 unique magnetic toys being sold in Canada, demonstrating that magnetic attraction is a play feature that continues to be popular in children's toys.

It is anticipated that the majority of magnetic toys on the Canadian market comply with the general prohibition in Canada and the mandatory safety requirements in place in the United States and the European Union. However, these jurisdictions still identify and remove non-compliant magnetic toys from their markets. For example, in 2016, the European Commission's Rapid Alert System for dangerous non-food products published 16 recalls for toys containing dangerous magnets. The most recent Canadian recall involved dangerous magnetic toys that had been sold in Canada from December 2014 to October 2016. (see footnote 20)

Currently, the Regulations, which are made under the CCPSA, do not include requirements to protect children from the serious ingestion hazard posed by certain magnetic toys. Some industry stakeholders may not be aware of the extent of their obligation to make their magnetic toys safe. There are also continued recalls in the United States and the European Union, where this is codified in rule.

Objectives

The objective of the proposed amendments is to set out specific requirements under the existing Regulations that will help to protect children from the serious ingestion hazard posed by small powerful magnets in toys, consolidating the requirements with other Canadian safety requirements for toys. A further objective is to align Canada's regulatory requirements and tests for this hazard with those applied in the United States and the European Union.

Description

Health Canada's proposed amendments set a requirement that any magnetic toy or magnetic component of a toy must either be too large to be likely to be swallowed or the magnet must not be so powerful that it can attract across intestines if swallowed. These requirements will have to be met both before and after the toy or component is subjected to certain integrity tests intended to reveal potential weaknesses in how a magnet is contained in a toy or in the magnet's structure. Exceptions are proposed for magnets in electrical systems or those in advanced experimental sets intended for children eight years of age or older.

Specifically, the proposed amendments to the Regulations include the following two principal elements:

  1. A requirement that any magnetic toy or magnetic component that can be entirely enclosed in the small parts cylinder must have a magnetic flux index of less than 0.5 T2mm2. The small parts cylinder is illustrated in Schedule 1 of the Regulations, and the test incorporates the use of a force of not more than 4.45 N. The method to assess the magnetic flux index is set out in a new schedule of the Regulations.
  2. A requirement stating that the above criteria must also be met after the magnetic toy or magnetic component is subjected to a standard series of integrity tests set out in a new schedule of the Regulations. The tests outlined in Table 1 will be captured in the schedule. Note that for the drop, torque, tension, impact and compression tests, it is proposed to reference the ASTM F963 standard, as amended from time to time, to align tests for magnetic toys between Canada and the United States for current and future versions of ASTM F963.
Table 1. Summary of proposed integrity tests for magnetic toys and magnetic components
Test Comparison or Referenced Standards (see footnote 21) (see footnote 22) (see footnote 23)
Soaking test for magnetic components of wooden toys, toys to be used in water or toys brought into contact with the user's mouth for use This test is described in the proposed schedule and aligns with ASTM F963-16, section 8.25.4.1; EN 71-1:2014, clause 8.9; and ISO 8124-1:2014, clause 5.34.
Initial tension test for magnets (10 attach-detach cycles) This test is described in the schedule and aligns with EN 71-1:2014, clause 8.34; and ISO 8124-1:2014, clause 5.31. It also aligns with ASTM F963-16, except with respect to the number of cycles (1 000 cycles is used in the ASTM standard).
Drop test Incorporation by reference of ASTM F963-16, sections 8.7.1 and 8.7.2
Torque test Incorporation by reference of ASTM F963-16, section 8.8
Tension test Incorporation by reference of ASTM F963-16, section 8.9
Impact test for magnets Incorporation by reference of ASTM F963-16, section 8.25.4.6
Compression test Incorporation by reference of ASTM F963-16, section 8.25.4.7
Final tension test for magnets (10 attach-detach cycles) This test is described in the schedule and aligns with EN 71-1:2014, clause 8.34; and ISO 8124-1:2014, clause 5.31. It also aligns with ASTM F963-16, except with respect to the number of cycles (1 000 cycles is used in the ASTM standard).
Small parts cylinder

The small parts cylinder will be used to identify magnetic toys or magnetic toy components that are of a size that may be able to be swallowed. This cylinder is an internationally recognized gauge used to identify objects that pose ingestion or choking hazards to young children. The use of the small parts cylinder in magnetic toy safety requirements has been applied in the United States and the European Union.

Magnetic flux index

The magnetic flux index is a measure of the attractive power of a magnet. It is derived from the flux density, which is measured by a Gauss meter (with units in tesla squared [T2]), and the area of the pole surface of the magnet (with units in millimetres squared [mm2]). The proposed amendments use 0.5 T2mm2 as the maximum limit of magnetic flux index, which is the full metric equivalent to the 50 kG2mm2 limit used in the United States and the European Union. The value is considered to provide a margin of safety to protect against magnets capable of attracting across intestinal tissue, given that rare earth element magnets can range in magnetic flux index values of between 2.0 and 3.5 T2mm2. In comparison, the magnets involved in the death of the child in 2005 had a 3.4 T2mm2 magnetic flux index. (see footnote 24)

Toys with only one magnet

The proposed amendments apply to toys with as few as one magnet, since one small powerful magnet in combination with another ferromagnetic object (such as most Canadian coins) could produce the same result of attracting across intestinal tissues if ingested. (see footnote 25) This approach aligns with magnetic toy safety requirements in the United States and the European Union.

Exceptions

The proposed amendments establish two exceptions that align with those in the United States and the European Union. The first is an exception for a magnetic component that is required for the function of a motor, relay, speaker, and other electric or electronic component, as long as the magnetic property is not part of the intended learning or play pattern for the toy. The second is an exception for magnetic components in toys that are advanced magnetic electrical experimental kits intended for children eight years of age or older, where the kit has a warning on its packaging and instructions regarding the danger of swallowing magnets.

Other minor amendments not specifically related to magnets

A minor amendment is proposed for the definition of a toy in section 1 of the Regulations. The proposed amendments will add an upper age reference within the existing definition to clarify its scope. Health Canada's long-standing policy is to interpret the term “toy” as applying to toys intended for use by children under 14 years of age, (see footnote 26) which is consistent with the definition of toy in the Phthalates Regulations under the CCPSA. This upper age reference for toys is consistent with that applied in the United States and the European Union as well as in ISO 8124. This amendment is expected to have no impact on the intent of the existing Regulations, costs for industry or consumers, toy safety or children's health.

Other minor amendments described below are being made to simplify and clarify the application of the Regulations. All of these amendments are expected to have no impact on the intent of the existing Regulations, costs for industry or consumers, toy safety or children's health.

Coming into force

The amended Regulations would come into force six months after they are published in the Canada Gazette, Part II, during which time the current Regulations would continue to apply to all toys sold, advertised, imported or manufactured in Canada. The provisions of the CCPSA regarding danger to human health or safety would continue to apply to dangerous magnetic toys.

Regulatory and non-regulatory options considered

Option 1: Status quo

Paragraphs 7(a) and 8(a) of the CCPSA provide Health Canada with the authority to stop the supply of consumer products that pose a danger to human health or safety. Since 2013, Health Canada has considered certain magnetic toys to pose a danger to human health or safety (see footnote 27) and has taken action using this authority. However, this policy is not reflected in the Regulations, and in the absence of accessible and transparent rules, some industry members may not be aware of the extent of their obligation to make their magnetic toys safe. Thus, this is not the preferred option.

Option 2: Incorporate by reference requirements set out in sections of ASTM F963-16

Health Canada considered an option to directly reference the full suite of magnet-related definitions, requirements, tests and warnings from the ASTM F963-16. This option was rejected to allow for the use of consistent terminology across the proposed amendments and the existing Regulations and to respect Canadian regulatory drafting conventions.

Option 3: Inform and educate consumers

The effectiveness of consumer information and education efforts varies with the receptiveness of the population at the time of a communication's release, the type of media used to convey the information, the extent of media pick-up, the consumer's ability to understand a hazard and to implement effective hazard control measures, as well as other variables.

The serious and hidden ingestion hazard posed by small powerful magnets cannot be effectively addressed by parents and caregivers alone. A further consideration is that the hazard involves older children who receive less direct supervision than younger, more vulnerable children. Therefore, Health Canada has already signalled to industry that the sale of toys that do not meet international safety standards regarding the use of small powerful magnets is prohibited in Canada. The Department will continue to supplement the recommended option with information and education to consumers.

Option 4: Set out specific requirements and tests for magnetic toys in the Regulations

Option 4 is the preferred option and it is reflected in the proposed amendments to introduce requirements, labelling and tests for magnetic toys and magnetic toy components within the Regulations under the CCPSA. Updating the Regulations by incorporating specific requirements and tests will now consolidate all magnetic toy requirements in an accessible, transparent and consistently applied manner. The proposed amendments are aligned with the mandatory requirements in place in the United States and the European Union; thus, the impact on industry is expected to be low.

The proposed amendments incorporate by reference certain test method sections from the ASTM F963-16 standard. In this way, test results for the magnetic safety of toys destined for the U.S. market can be applied to toys destined for the Canadian market.

Benefits and costs

A cost-benefit analysis (CBA) that quantifies the expected costs and benefits of the proposed amendments has been prepared and is available on request to the departmental contact.

Costs

As part of the CBA, consultations were held with businesses involved in the manufacture, import, wholesale distribution, and retail sale of children's toys to gather estimates of the costs of adopting the proposed amendments. Fifteen of the 26 businesses contacted provided input on the cost analysis. The major findings were as follows:

Estimates were made of incremental product redesign costs and product testing costs associated with the proposed amendments. Only one Canadian manufacturer indicated they expected additional costs and estimated a one-time product redesign cost of $50,000 and annual product testing costs of about $6,500. No incremental costs will be incurred by Health Canada, as the costs to administer, promote and enforce the amended Regulations will become part of Health Canada's existing compliance and enforcement program for consumer products. Health Canada will not incur any incremental capital or operating costs due to the proposed amendments. The total 10-year costs of the proposed amendments are estimated to be approximately $94,610 (present value, 2016 price level).

Small businesses were asked whether a flexible regulatory option involving a six-month delay in requiring compliance would reduce costs. The one small business that identified a potential impact suggested that no cost savings would be derived from a six-month delay.

Benefits

The CBA assessed the benefits of the proposed amendments using available information. The CBA confirmed that complete information on the number of past non-fatal and fatal injuries involving small powerful magnets in toys was not available. In order to assess benefits, the best available Canadian information on injuries involving magnets provided by CHIRPP was used. The data covered approximately 72 months, spanning January 2005 through December 2010. Notably, the data

The CHIRPP data was reviewed, filtered, and grossly extrapolated to the national level. A total of about 20 injuries per year from small powerful magnets in toys was estimated. In addition, it was estimated that the annual risk of a fatality involving a small powerful magnet in a toy in Canada was about 0.005 (i.e. one fatality every 200 years).

Assumptions were made with respect to the severity and unitary costs of non-fatal injuries, the cost of a fatality, and the effectiveness of the proposed amendments in reducing injuries and fatalities. It was estimated that the total 10-year benefits of the proposed amendments would be approximately $2.4 million (present value, 2016 price level).

Accounting statement

The CBA for the proposed amendments provided the accounting statement for 10 years, from 2017 to 2026, as shown in Table 2 below. The statement shows annualized average net benefits of approximately $300,000. Several additional benefits were identified but not monetized and these are listed in the accounting statement under “Qualitative impacts.”

Table 2. Accounting statement for 2017 to 2026
  2017 2018 2019 2020 2026 (see footnote a) Total (PV) (see footnote b) Annualized Average
A. Quantified impacts (CAD, 2016 price level) (see footnote c)
Benefits to consumers 331,225 335,200 339,222 343,293 368,763 2,439,912 347,389
Costs to toy industry and consumers 56,500 6,578 6,657 6,737 7,237 94,610 13,470
Net benefits 274,725 328,622 332,565 336,556 361,526 2,345,302 333,918
B. Quantified impacts not monetized
Positive impacts None
Negative impacts None
C. Qualitative impacts
Positive impacts
  • Establishes regulatory protections for a vulnerable segment of society that otherwise does not understand and cannot manage the risks associated with dangerous magnetic toys;
  • Avoids the dumping and sale of dangerous magnetic toys in Canada that were denied access to other markets;
  • Is proactive and timely in comparison to product-by-product recalls by Health Canada (affords protections before a dangerous magnetic toy is already in the hands of Canadian children);
  • Avoids the costs of product recalls to manufacturers in instances where dangerous magnetic toys are identified by Health Canada;
  • Ensures that manufacturers, importers, and retailers are on a level playing field by setting out clear rules for supplying magnetic toys to the Canadian market; and
  • Further aligns Health Canada's toy safety regulations with those of the United States and the European Union.
Negative impacts
  • Some companies may face minimal costs in sourcing compliant magnetic toys.
  • Additional costs to industry are likely to be passed to the consumer; however, these costs are expected to be insignificant given that the majority of products on the Canadian market are sourced from regions with existing safety requirements and tests for magnetic toys.
Sensitivity analysis

A sensitivity analysis was completed as part of the CBA. It demonstrated that if the present value of costs is five times higher than estimated and the present value of benefits is 80% lower than estimated (which could reflect a situation where the majority of magnetic toys on the market already meet the requirements outlined in Health Canada's policy), a small net benefit of $15,000 over 10 years is still estimated.

“One-for-One” Rule

The “One-for-One” Rule does not apply, since the proposed amendments to the Regulations do not impose any administrative costs on industry.

Small business lens

The small business lens does not apply because the estimated nationwide cost impact is less than $1 million per year and it has been determined that small business costs are not disproportionally large. The proposed amendments are not expected to have a disproportionate effect on small businesses, given the length of time that businesses have had to manufacture and source toys that meet the policy distributed in 2013. The proposed amendments are not expected to increase or decrease the administrative burden on small businesses, because there are no reporting or record-keeping requirements related to the proposed amendments.

Consultation

In November 2009, Health Canada conducted a pre-Canada Gazette, Part I, consultation on a proposed set of amendments to modernize Canada's safety requirements for children's toys under the Hazardous Products (Toys) Regulations. One of the five subjects of the consultation focussed on adding requirements for magnetic toys. The consultation document was posted to the Health Canada website on November 13, 2009. It was distributed via email to stakeholders and via the Health Canada “Consumer Product Safety News” online service to more than 7 000 subscribers. Interested parties were invited to provide comments on the proposed amendments within 60 days.

Specific responses to the magnetic toy portion of the consultation were received from the following eight distinct groups: one trade association, one retail establishment, two safety advocates, two product-testing laboratories and two manufacturers. The proposed amendments for magnetic toys were well received by the respondents. There was support for aligning the Canadian requirements with those of the United States or the European Union, so that another safety standard would not be developed.

Regulatory cooperation

The proposed amendments will align the safety requirements for magnetic toys between Canada and the United States. Although there are pre-existing differences in the definition of “toy” across the jurisdictions — Canada's definition is somewhat broader and includes products for learning — Health Canada's proposed amendments are aligned with the U.S. requirements for magnetic toys in all but one respect. This misalignment is in the number of attach-detach cycles in the integrity tests. The ASTM F963-16 standard calls for two sets of 1 000 attach-detach cycles, whereas Health Canada's proposed amendments call for two sets of 10 attach-detach cycles.

Health Canada's internal testing in 2009 demonstrated that the “impact test for magnets” in the proposed testing sequence (see “Description” section above) was the most effective test in demonstrating magnet separation in toys known to release magnets during play. For this reason, Health Canada's proposed amendments align with the EN 71-1 and ISO 8124-1 standards and apply a more efficient two sets of 10 attach-detach cycles instead of the two sets of 1 000 attach-detach cycles. However, a toy that meets the U.S. magnetic toy test requirements will meet Health Canada's proposed amendments, so this proposal would not result in additional testing burden on manufacturers for products destined for both the U.S. and the Canadian market.

Rationale

Health Canada advised manufacturers, importers, and sellers of children's toys in 2013 that the Department considers certain magnetic toys to be a danger to human health or safety and that they are therefore prohibited for sale under sections 7 and 8 of the CCPSA. However, this policy is not reflected in the Regulations, the main compendium of specific requirements for toys in Canada. Given that small powerful magnets in children's toys pose a risk of serious injury and death to children, and a wide range of magnetic toys continue to be available on the Canadian market, a regulatory amendment incorporating requirements and tests that will result in specific rules being accessible, transparent and consistently applied is proposed. This regulatory proposal also clearly aligns Canadian requirements with those in the United States and the European Union for magnets in toys.

A CBA estimated that the total 10-year net present benefits of the proposed amendments would be approximately $2.3 million. A sensitivity analysis was completed as part of the CBA. It demonstrated that if the present value of costs is five times higher than estimated and the present value of benefits is 80% lower than estimated (which could reflect a situation where the majority of magnetic toys on the market already meet the requirements outlined in Health Canada's policy), a small net benefit of $15,000 over 10 years is still estimated. An early consultation on the proposal, in 2009, was well received by stakeholders. The impact on industry is expected to be very low since mandatory safety requirements for magnetic toys have been in place for several years in the United States and the European Union, and the proposed amendments are aligned with the requirements in those jurisdictions and with Health Canada's existing policy.

Implementation, enforcement and service standards

The amended Regulations will not result in any major changes to Health Canada's enforcement activities. Compliance and enforcement will be facilitated by clearly worded requirements and tests set out in the amended Regulations.

Compliance and enforcement of the amended Regulations will follow established Health Canada approaches and procedures, including sampling and testing of products, inspection at retail, follow-up on complaints made by the Canadian public and public health organizations, and follow-up on mandatory incident reports by industry. Non-compliant products will be subject to the actions available to Health Canada inspectors and other officials and will depend on the seriousness of the circumstances. These actions may include a voluntary commitment to product correction by industry, negotiation with industry for the voluntary removal of non-compliant products from the market, seizure, orders for recall or other measures, administrative monetary penalties, and prosecution under the CCPSA. Health Canada will also seek to maximize proactive compliance with the amended Regulations through ongoing industry and retailer education, and maximize safe use of magnetic toys through consumer outreach and education.

Contact

Sylvia Weihrer
Consumer Product Safety Directorate
Healthy Environments and Consumer Safety Branch
Health Canada
Address locator: 4908B
269 Laurier Avenue West
Ottawa, Ontario
K1A 0K9
Fax: 613-952-2551
Email: sylvia.weihrer@hc-sc.gc.ca

PROPOSED REGULATORY TEXT

Notice is given that the Governor in Council, pursuant to section 37 of the Canada Consumer Product Safety Act (see footnote d), proposes to make the annexed Regulations Amending the Toys Regulations (Magnetic Toys).

Interested persons may make representations concerning the proposed Regulations within 75 days after the date of publication of this notice. All such representations must cite the Canada Gazette, Part I, and the date of publication of this notice, and be addressed to Sylvia Weihrer, Project Officer, Risk Management Bureau, Consumer Product Safety Directorate, Department of Health, Address Locator 4908B, 269 Laurier Avenue West, Ottawa, Ontario K1A 0K9 (fax: 613-952-2551; email: sylvia.weihrer@hc-sc.gc.ca).

Ottawa, October 26, 2017

Jurica Čapkun
Assistant Clerk of the Privy Council

Regulations Amending the Toys Regulations (Magnetic Toys)

Amendments

1 The definitions plush toy, soft toy and toy in section 1 of the Toys Regulations (see footnote 28) are replaced by the following:

plush toy means a toy with a raised fibre surface. (jouet en peluche)

soft toy includes a toy that is stuffed or made of pliable rubber or pliable plastic. (jouet mou )

toy means a product that is intended for use by a child under 14 years of age in learning or play. (jouet)

2 Section 37 of the Regulations is replaced by the following:

Shaft-like handle

37 A pull or push toy that has a shaft-like handle that measures 10 mm or less in diameter must have a protective tip that is placed on the end of the handle to prevent puncture wounds and that is able to withstand a pulling force of 44.5 N.

3 Subsection 38(3) of the Regulations is repealed.

4 The Regulations are amended by adding the following after section 42:

Magnetic Toys
Magnetic force

43 Every magnetic toy and any of its magnetic components, including those magnetic components that become separated from the magnetic toy or magnetic component when tested in accordance with Schedule 9, that can be totally enclosed in the small parts cylinder, as illustrated in Schedule 1, using a force of not more than 4.45 N, must have a magnetic flux index of less than 0.5 T2mm2, when tested in accordance with Schedule 10.

Exceptions

44 (1) Section 43 does not apply to the following magnetic components:

Warning — container and instructions for use

(2) The following warning or its equivalent must be displayed prominently and legibly in English and French on the kit's container and instructions:

WARNING!

Not suitable for children under 8 years of age. This kit contains small magnets. Swallowed magnets can stick together across intestines causing serious injuries. Seek immediate medical attention if a magnet may have been swallowed.

MISE EN GARDE!

Cette trousse ne convient pas à un enfant de moins de 8 ans. Elle contient de petits aimants. Les aimants qui sont avalés peuvent s'attirer mutuellement à travers l'intestin et engendrer ainsi de graves blessures. Consultez immédiatement un médecin si un enfant semble avoir avalé un aimant.

5 Schedule 1 to the Regulations is replaced by the Schedule 1 set out in Schedule 1 to these Regulations.

6 The Regulations are amended by adding, after Schedule 8, the Schedules 9 and 10 set out in Schedule 2 to these Regulations.

Coming into Force

7 These Regulations come into force on the day that, in the sixth month after the month in which they are published in the Canada Gazette, Part II, has the same calendar number as the day on which they are published or, if that sixth month has no day with that number, the last day of that sixth month.

SCHEDULE 1

(Section 5)

SCHEDULE 1

(subsection 7(1) and sections 30 and 43)

Small Parts Cylinder

Small Parts Cylinder

SCHEDULE 2

(Section 6)

SCHEDULE 9

(Section 43)

Test Method for Integrity of Magnetic Toys and Magnetic Components

1 The following method is to be used for testing the integrity of magnetic toys and magnetic components:

SCHEDULE 10

(Section 43)

Test Method for Determination of Magnetic Flux Index
Required Materials

1 The following materials are required for determining the magnetic flux index:

Procedure

2 The following method is to be used for determining the magnetic flux index:

[44-1-o]